bevatron
Elite Lord
DeltaCam Link ist nicht mehr aktiv./ Link ist nicht mehr aktiv.
Python/Cobra 1.20 is a major compatibility enhancement release. The new version has successfully been tested with a variety of TV sets at an Euronics shop (see below).
Changes since version 1.12:
Speed Enhancements
With this firmware version, we now measured the fastest channel switching speed among all our contestants (AlphaCrypt, maxcam Twin V2, unicam evo). The difference is only in the area of tens of milliseconds, so nothing to write home about, still it proves that all the useful features do not slow the DeltaCam down at all!
(switching speed has been measured with a Digital Devices Cine S2 V6 / Flex CI for HD+/NAGRA3 channels on the same transponder)
CAID Management
Some STBs/TVs can’t handle the huge amount of CAIDs supported by the DeltaCam. They either do not initialize or properly send the information required for descrambling (e.g. Atemio AM 510 HD TitanNit or TechniSat DigiCorder HD S2 Plus). The current solution is to override the CAID list with a custom one which is possible with the DeltaCam, see Link ist nicht mehr aktiv.. Only enter the CAIDs that the inserted SmartCards and channels you want to open via emu support. To flash the newly created CAID list to the DeltaCam, see
We will now concentrate on making the CAID list dynamic. The DeltaCam will from then on only report the CAIDs supported by the inserted SmartCards and emus for which keys exist, without the need to provide a custom CAID list override.
MTD with Kathrein/TechniSat
We checked MTD with a Kathrein UFS 924. Kathrein/TechniSat restrict MTD to AlphaCrypt/MASCOM modules only (unicam/maxcam do not work either). They will have to add the DeltaCam to their whitelist of MTD-capable CAMs.
Up-to-date Emu Keys for Cobra
Link ist nicht mehr aktiv.
The follwing TVs have successfully been tested at an Euronics shop
Python/Cobra 1.20 is a major compatibility enhancement release. The new version has successfully been tested with a variety of TV sets at an Euronics shop (see below).
Changes since version 1.12:
- now fixed the whole Panasonic 2013 line of TV sets (also those with 2 CI slots like the Panasonic TX-P50VTW60)
- fixed GigaBlue Quad
- fixed Philips TVs (PFL series)
- some general compatibility enhancements
- improved compatibility with several DVB-C headends (Kopfstationen)
- Sky V14 EMM fixed (CAIDs with recurring ECM/EMM PID have not been taken into account)
- some other fixes, code improvements and enhancements (also resulting in a faster channel switching speed)
Speed Enhancements
With this firmware version, we now measured the fastest channel switching speed among all our contestants (AlphaCrypt, maxcam Twin V2, unicam evo). The difference is only in the area of tens of milliseconds, so nothing to write home about, still it proves that all the useful features do not slow the DeltaCam down at all!
(switching speed has been measured with a Digital Devices Cine S2 V6 / Flex CI for HD+/NAGRA3 channels on the same transponder)
CAID Management
Some STBs/TVs can’t handle the huge amount of CAIDs supported by the DeltaCam. They either do not initialize or properly send the information required for descrambling (e.g. Atemio AM 510 HD TitanNit or TechniSat DigiCorder HD S2 Plus). The current solution is to override the CAID list with a custom one which is possible with the DeltaCam, see Link ist nicht mehr aktiv.. Only enter the CAIDs that the inserted SmartCards and channels you want to open via emu support. To flash the newly created CAID list to the DeltaCam, see
Sie müssen registriert sein, um Links zu sehen.
.We will now concentrate on making the CAID list dynamic. The DeltaCam will from then on only report the CAIDs supported by the inserted SmartCards and emus for which keys exist, without the need to provide a custom CAID list override.
MTD with Kathrein/TechniSat
We checked MTD with a Kathrein UFS 924. Kathrein/TechniSat restrict MTD to AlphaCrypt/MASCOM modules only (unicam/maxcam do not work either). They will have to add the DeltaCam to their whitelist of MTD-capable CAMs.
Up-to-date Emu Keys for Cobra
Link ist nicht mehr aktiv.
The follwing TVs have successfully been tested at an Euronics shop
- Grundig 32VL5302BG
- Grundig 32VLC6200BG
- Grundig Sydney 47CLE9275SL
- Grundig Sidney 55CLE9275SL
- Loewe ART 37 LED DR+
- Loewe Connect ID32DR+
- Loewe Connect ID55
- Loewe Individual 46
- Loewe Xelos 32
- Loewe Xelos 40
- Metz Axio 37LED Media 37TU45
- Metz Axio Pro 32LED 32TT42
- Metz Calea 423D Media
- Metz Chorus 32LED100 32U12
- Metz Chorus 37-LED100
- Metz Linea 26LED 26TT16
- Metz Linea 32LED100 32TU11
- Metx Linea 42-LED100 42U10
- Metz Merio 37LED 37TU15
- Metz Merio 42LED Media 42TU15
- Metz Merio 47-LED Media 47TU15
- Panasonic TX-L32EW5
- Panasonic TX-L39B6E
- Panasonic TX-L39EN63
- Panasonic TX-L42B6E
- Panasonic TX-L42DTW60
- Panasonic TX-L42ETN63
- Panasonic TX-L47DT
- Panasonic TX-L47E5
- Panasonic TX-L47WTW60
- Panasonic TX-L50DWT60
- Panasonic TX-L55WT50
- Panasonic TX-L55WTW60
- Panasonic TX-L60DTW60
- Philips 42PFL3507K
- Philips 32PFL6007K
- Samsung UE39F5370
- Samsung UE40F80
- Samsung UE46F6470
- Samsung UE55ES6750
- Samsung UE55F80
- Sharp Acquos LC46LE732E
- Sony KDL-40W905
- Sony KDL 42W655
- Sony KDL 42W809
- Sony KDL-46HX758
- Sony KDL-47W809
- Sony KDL-5580xA
- Sony KDL-55W905A
- Technisat MultiVision 40 5840/03XX
- Technisat TechniLine 40HDI 5540/43XX
- Technisat TechniPlus ISIO 55
Zuletzt bearbeitet: