Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Fehlermeldungen im LOG

T

Trulla00

Newbie
Registriert
11. Januar 2014
Beiträge
9
Reaktionspunkte
0
Punkte
1
Hallo zusammen,

hab meinen RasPi nach Anleitung aufgesetzt und bekomme folgende log:
2014/09/15 18:34:03 B6FA8000 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (armv6l-pc-linux)
2014/09/15 18:34:03 B6FA8000 s version=1.10rc-svn, build #6089, system=armv6l-pc-linux, nice=0
2014/09/15 18:34:03 B6FA8000 s client max. idle=120 sec, debug level=0
2014/09/15 18:34:03 B6FA8000 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2014/09/15 18:34:03 B6FA8000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2014/09/15 18:34:03 B6FA8000 s Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2014/09/15 18:34:03 B6FA8000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/09/15 18:34:03 B6FA8000 s signal handling initialized (type=sysv)
2014/09/15 18:34:03 B6FA8000 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2014/09/15 18:34:03 B6FA8000 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2014/09/15 18:34:03 B6FA8000 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2014/09/15 18:34:03 B6FA8000 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2014/09/15 18:34:03 B6FA8000 s monitor: disabled
2014/09/15 18:34:03 B6FA8000 s camd33: disabled
2014/09/15 18:34:03 B6FA8000 s camd35: disabled
2014/09/15 18:34:03 B6FA8000 s cs378x: disabled
2014/09/15 18:34:03 B6FA8000 s newcamd: disabled
2014/09/15 18:34:03 B6FA8000 s cccam: initialized (fd=7, port=12000, ip=192.168.178.44, crypted)
2014/09/15 18:34:03 B6FA8000 s radegast: disabled
2014/09/15 18:34:03 B6FA8000 s http thread started
2014/09/15 18:34:03 B6FA8000 s creating thread for device /dev/ttyUSB0
2014/09/15 18:34:03 B6FA8000 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/15 18:34:03 B6FA8000 s waiting for local card init
2014/09/15 18:34:03 B6BDC470 r reader thread started (thread=B6BDC470, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/09/15 18:34:03 B6BDC470 r smargo init
2014/09/15 18:34:03 B6BE8470 h HTTP Server listening on port 16002
2014/09/15 18:34:04 B6BDC470 r sky card detected
meine oscam.server:

[reader]
label = sky
enable = 1
protocol = smargo
device = /dev/ttyUSB0
boxid = 12345678
detect = cd
group = 1
caid = 098C
#mhz = 369
#cardmhz = 369
emmcache = 1,3,2
ins7e11 = 15
ndsversion = 2


Hat da vielleicht jemand eine Idee, was da falsch ist o. evtl. fehlt?

LG u, Danke

Trulla00
 
Zuletzt bearbeitet von einem Moderator:
AW: Anleitung: Raspberry PI+ Debian Wheezy+IPC+OSCam

6089
Zum Vergrößern anklicken....
Würde erst mal ein üpdate von oscam machen.
Code: 
o compile
Deine Konfigs bleiben erhalten. Wir sind da bei Version 98XX.
Bei der 60XX Version war noch einiges anders.

MfG
 
oscam update hat soweit gefunzt, hab jetzt folgenden log (leider immer noch alles schwarz):

2014/09/15 21:06:38 1CED6B8 c test (098C&000000/0C1E/006B/98:71FB7D66B42ED66572534741B1DFE614): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:45 1CED6B8 c test (098C&000000/0C1E/006B/98:FC28840635F0DEDBD61628097B76BC42): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:52 1CED6B8 c test (098C&000000/0C1E/006B/98:CBCDC6F3C8290B423AE233847BF46DA4): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:59 1CED6B8 c test (098C&000000/0C1E/006B/98:21E661C459960DBCD302A8E924A6D651): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:06 1CED6B8 c test (098C&000000/0C1E/006B/98:B1C3982A2C6CDE6715F3CB3F6480430B): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:13 1CED6B8 c test (098C&000000/0C1E/006B/98:BBCB74FEDF737F0181B3AB2D12EB9FA7): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:20 1CED6B8 c test (098C&000000/0C1E/006B/98015815A443B806ECF6D115D5AC9624F): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:27 1CED6B8 c test (098C&000000/0C1E/006B/98:3F7FAD0B45BF3C41D823ED3F28E6D3D6): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:34 1CED6B8 c test (098C&000000/0C1E/006B/98:19A55E29E43B044918002DC5F5BB233D): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:41 1CED6B8 c test (098C&000000/0C1E/006B/98:A1B12B7EA0C669FCCB65581665F23EC6): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:48 1CED6B8 c test (098C&000000/0C1E/006B/98:4BD88504858C98600924C75806DCE1F1): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:55 1CED6B8 c test (098C&000000/0C1E/006B/98:B8CE1EE44F4A529EED2D6BC60D1F417F): rejected group (0 ms) (no matching reader)

oscam update hat soweit gefunzt, sieht jetzt so aus (leider immer noch schwarz):

2014/09/15 21:06:38 1CED6B8 c test (098C&000000/0C1E/006B/98:71FB7D66B42ED66572534741B1DFE614): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:45 1CED6B8 c test (098C&000000/0C1E/006B/98:FC28840635F0DEDBD61628097B76BC42): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:52 1CED6B8 c test (098C&000000/0C1E/006B/98:CBCDC6F3C8290B423AE233847BF46DA4): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:59 1CED6B8 c test (098C&000000/0C1E/006B/98:21E661C459960DBCD302A8E924A6D651): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:06 1CED6B8 c test (098C&000000/0C1E/006B/98:B1C3982A2C6CDE6715F3CB3F6480430B): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:13 1CED6B8 c test (098C&000000/0C1E/006B/98:BBCB74FEDF737F0181B3AB2D12EB9FA7): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:20 1CED6B8 c test (098C&000000/0C1E/006B/98015815A443B806ECF6D115D5AC9624F): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:27 1CED6B8 c test (098C&000000/0C1E/006B/98:3F7FAD0B45BF3C41D823ED3F28E6D3D6): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:34 1CED6B8 c test (098C&000000/0C1E/006B/98:19A55E29E43B044918002DC5F5BB233D): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:41 1CED6B8 c test (098C&000000/0C1E/006B/98:A1B12B7EA0C669FCCB65581665F23EC6): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:48 1CED6B8 c test (098C&000000/0C1E/006B/98:4BD88504858C98600924C75806DCE1F1): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:55 1CED6B8 c test (098C&000000/0C1E/006B/98:B8CE1EE44F4A529EED2D6BC60D1F417F): rejected group (0 ms) (no matching reader)

noch ein Versuch, auf die Gefahr hin, mehrfach zu posten......

oscam update hat soweit gefunzt, sieht jetzt so aus (leider immer noch schwarz):
2014/09/15 21:06:38 1CED6B8 c test (098C&000000/0C1E/006B/98:71FB7D66B42ED66572534741B1DFE614): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:45 1CED6B8 c test (098C&000000/0C1E/006B/98:FC28840635F0DEDBD61628097B76BC42): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:52 1CED6B8 c test (098C&000000/0C1E/006B/98:CBCDC6F3C8290B423AE233847BF46DA4): rejected group (0 ms) (no matching reader)
2014/09/15 21:06:59 1CED6B8 c test (098C&000000/0C1E/006B/98:21E661C459960DBCD302A8E924A6D651): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:06 1CED6B8 c test (098C&000000/0C1E/006B/98:B1C3982A2C6CDE6715F3CB3F6480430B): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:13 1CED6B8 c test (098C&000000/0C1E/006B/98:BBCB74FEDF737F0181B3AB2D12EB9FA7): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:20 1CED6B8 c test (098C&000000/0C1E/006B/98015815A443B806ECF6D115D5AC9624F): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:27 1CED6B8 c test (098C&000000/0C1E/006B/98:3F7FAD0B45BF3C41D823ED3F28E6D3D6): rejected group (1 ms) (no matching reader)
2014/09/15 21:07:34 1CED6B8 c test (098C&000000/0C1E/006B/98:19A55E29E43B044918002DC5F5BB233D): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:41 1CED6B8 c test (098C&000000/0C1E/006B/98:A1B12B7EA0C669FCCB65581665F23EC6): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:48 1CED6B8 c test (098C&000000/0C1E/006B/98:4BD88504858C98600924C75806DCE1F1): rejected group (0 ms) (no matching reader)
2014/09/15 21:07:55 1CED6B8 c test (098C&000000/0C1E/006B/98:B8CE1EE44F4A529EED2D6BC60D1F417F): rejected group (0 ms) (no matching reader)

nochmal neu gestartet:

OScam-Server: Log - Abbrechen mit [Strg]+[C] 15.09.2014 21:25
===============================================================================


2014/09/15 21:24:38 171B2B0 r sky [smargo] Error activating card.
2014/09/15 21:24:55 0 --- Skipped 2 duplicated log lines ---
2014/09/15 21:24:55 171B2B0 r sky [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/15 21:24:55 171B2B0 r sky [smargo] card initializing error
2014/09/15 21:24:56 0 s init for all local cards done
2014/09/15 21:24:56 0 s anti cascading disabled
2014/09/15 21:24:56 1728610 c anonymous disconnected from 192.168.178.24
2014/09/15 21:25:02 0 --- Skipped 1 duplicated log lines ---
2014/09/15 21:25:02 172D910 c encrypted cccam-client 192.168.178.24 granted (test, au=auto (1 reader))
2014/09/15 21:25:04 172D910 c test (098C&000000/0C1E/006B/98:18DDCA34FD33FB99D8CFE064E22FE2CA): rejected group (0 ms) (no matching reader)
2014/09/15 21:25:11 172D910 c test (098C&000000/0C1E/006B/98:034E2981D9D7A06C96C979C864F244AD): rejected group (0 ms) (no matching reader)
2014/09/15 21:25:18 172D910 c test (098C&000000/0C1E/006B/98:3D2E21BDA0D5A3F8BBAB7097967EB13A): rejected group (1 ms) (no matching reader)
2014/09/15 21:25:25 172D910 c test (098C&000000/0C1E/006B/98:E8B81C89387F0ED9885CF09BE7F64810): rejected group (1 ms) (no matching reader)
2014/09/15 21:25:32 172D910 c test (098C&000000/0C1E/006B/98FD04B43C44E728CF84B6587242250E0): rejected group (0 ms) (no matching reader)

LG

Habe mal aktualisiert, sieht jetzt so aus (leider noch immer schwarz):

OScam-Server: Log - Abbrechen mit [Strg]+[C] 18.09.2014 19:10
===============================================================================


2014/09/18 19:10:43 0 s cccam: initialized (fd=5, port=12000, ip=192.168.178.44)
2014/09/18 19:10:43 0 s sky [smargo] creating thread for device /dev/ttyUSB0
2014/09/18 19:10:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 19:10:43 0 s waiting for local card init
2014/09/18 19:10:43 1E8D2B0 r sky [smargo] smargo init type is smargo
2014/09/18 19:10:43 1E8F0E0 h webif: decompressed 149217 bytes back into 362100 bytes
2014/09/18 19:10:43 1E8F0E0 h HTTP Server running. ip=192.168.178.44 port=16002
2014/09/18 19:10:43 1E8D2B0 r sky [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2014/09/18 19:10:44 1E8D2B0 r sky [smargo] card detected
2014/09/18 19:10:52 1E8D2B0 r sky [smargo] Error activating card.
2014/09/18 19:11:09 0 --- Skipped 2 duplicated log lines ---
2014/09/18 19:11:09 1E8D2B0 r sky [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/18 19:11:09 1E8D2B0 r sky [smargo] card initializing error
2014/09/18 19:11:09 0 s init for all local cards done
2014/09/18 19:11:09 0 s anti cascading disabled
2014/09/18 19:11:09 1E9A608 c anonymous disconnected from 192.168.178.24
2014/09/18 19:11:12 0 --- Skipped 1 duplicated log lines ---
2014/09/18 19:11:12 1E9F908 c encrypted cccam-client 192.168.178.24 granted (test, au=auto (1 reader))
2014/09/18 19:12:25 1E9F908 c test disconnected from 192.168.178.24
2014/09/18 19:12:27 1E9C4E8 c encrypted cccam-client 192.168.178.24 granted (test, au=auto (1 reader))

Meine oscam.server:

[reader]
label = sky
enable = 1
protocol = smargo
device = /dev/ttyUSB0
boxid = 12345678
detect = cd
group = 4
caid = 098C
mhz = 357
cardmhz = 357
emmcache = 1,1,2
ins7e11 = 15
ndsversion = 2


Hat da jemand eine Idee, was da falsch ist o. fehlt?

Danke im Voraus
 
Zuletzt bearbeitet von einem Moderator:
AW: Fehlermeldungen im LOG

2014/09/18 19:11:09 1E8D2B0 r sky [smargo] card initializing error
Zum Vergrößern anklicken....
die Karte wird nicht eingelesen
teste mal so ohne Fastmode Eintrag und mhz mal leer lassen (obwohl 357 Default ist)
Code: 
[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = sky[/COLOR]
[COLOR=#3E3E3E]enable = 1[/COLOR]
[COLOR=#3E3E3E]protocol = smargo[/COLOR]
[COLOR=#3E3E3E]device = /dev/ttyUSB0[/COLOR]
[COLOR=#3E3E3E]boxid = 12345678[/COLOR]
[COLOR=#3E3E3E]detect = cd[/COLOR]
[COLOR=#3E3E3E]group = 4[/COLOR]
[COLOR=#3E3E3E]caid = 098C[/COLOR]
[COLOR=#3E3E3E]mhz = [/COLOR]
[COLOR=#3E3E3E]cardmhz = 357[/COLOR]
[COLOR=#3E3E3E]emmcache = 1,1,2[/COLOR]
[COLOR=#3E3E3E]#ins7e11 = 15[/COLOR]
[COLOR=#3E3E3E]ndsversion = 2[/COLOR]

welche OScam Version hast/nutzt du jetzt?
eventuell mal den Smargo per Smartreader Protocol und Serial einbinden oder gleich auf Easymouse umsteigen

EDIT
2014/09/18 19:10:43 1E8D2B0 r sky [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
Zum Vergrößern anklicken....
wieso ist im log die cardmhz auf 369 und in der Config postest du 357?
 
AW: Fehlermeldungen im LOG

Habs mal so eingestellt:

[reader]
label = sky
enable = 1
protocol = smargo
device = /dev/ttyUSB0
boxid = 12345678
detect = cd
group = 1
caid = 098C
mhz =
#cardmhz = 357
emmcache = 1,1,2
#ins7e11 = 15
ndsversion = 2

Log ist jetzt so:

2014/09/18 20:25:54 0 s cccam: initialized (fd=5, port=12000, ip=192.168.178.44)
2014/09/18 20:25:54 0 s sky [smargo] creating thread for device /dev/ttyUSB0
2014/09/18 20:25:54 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 20:25:54 0 s waiting for local card init
2014/09/18 20:25:54 1F9A2B0 r sky [smargo] smargo init type is smargo
2014/09/18 20:25:54 1F9C0E0 h webif: decompressed 149217 bytes back into 362100 bytes
2014/09/18 20:25:54 1F9C0E0 h HTTP Server running. ip=192.168.178.44 port=16002
2014/09/18 20:25:54 1F9A2B0 r sky [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2014/09/18 20:25:55 1F9A2B0 r sky [smargo] card detected
2014/09/18 20:26:03 1F9A2B0 r sky [smargo] Error activating card.
2014/09/18 20:26:20 0 --- Skipped 2 duplicated log lines ---
2014/09/18 20:26:20 1F9A2B0 r sky [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/18 20:26:20 1F9A2B0 r sky [smargo] card initializing error
2014/09/18 20:26:21 0 s init for all local cards done
2014/09/18 20:26:21 0 s anti cascading disabled
2014/09/18 20:26:21 1FA7610 c anonymous disconnected from 192.168.178.24
2014/09/18 20:26:25 0 --- Skipped 1 duplicated log lines ---
2014/09/18 20:26:25 1FAC910 c encrypted cccam-client 192.168.178.24 granted (test, au=auto (1 reader))
2014/09/18 20:26:31 1FAC910 c test (098C&000000/0C1F/0069/98:15EEA29555AC1BA7A38D5ACF95AB9FDB): rejected group (1 ms) (no matching reader)
2014/09/18 20:26:38 1FAC910 c test (098C&000000/0C1F/0069/98:C0B26E0F3490B6273E64301415B24E3E): rejected group (0 ms) (no matching reader)
2014/09/18 20:26:45 1FAC910 c test (098C&000000/0C1F/0069/98:4E21EA9BFB4B9E9805F4E3594373A7AD): rejected group (0 ms) (no matching reader)

:wacko1:

die mhz=369 macht der Reader automatisch, ist ein "Smartreader V2" von Argolis.

Das ganze hat ja schon mal gefunzt an einem POGO, da ist mir leider der USB-Stick abgekackt und ich hatte kein Backup :wacko1:.
Wollte jetzt halt auf RasPi umsteigen. Sollte doch nicht soon großer Unterschied sein.
 
AW: Fehlermeldungen im LOG

die CARDMHZ solltest du auch nicht auskommentieren
Code: 
[COLOR=#ff0000]#[/COLOR][COLOR=#333333]cardmhz = 357[/COLOR]
 
AW: Fehlermeldungen im LOG

Mach mal so:
[reader]
label = sky
protocol = smartreader
device = /dev/ttyUSB0
smargopatch = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 534
cardmhz = 369
ident = 098C:000000
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Lese besser die Serial des Smargo aus und weise sie im Reader unter device zu.
 
AW: Fehlermeldungen im LOG

Habs mal so übernommen, der kann mit 'smartreader' aber wohl nix anfangen:

[reader]
label = sky
protocol = smartreader
device = /dev/ttyUSB0
smargopatch = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 534
cardmhz = 369
ident = 098C:000000
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
Der Log ist dann so:


2014/09/18 21:45:14 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/09/18 21:45:14 0 s signal handling initialized
2014/09/18 21:45:14 0 s cccam: initialized (fd=5, port=12000, ip=192.168.178.44)
2014/09/18 21:45:14 0 s sky [smartreader] creating thread for device /dev/ttyUSB0
2014/09/18 21:45:14 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/18 21:45:14 0 s waiting for local card init
2014/09/18 21:45:14 14EB2B0 r sky [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2014/09/18 21:45:14 14EB2B0 r sky [smartreader] Cannot open device: /dev/ttyUSB0
2014/09/18 21:45:14 14ED0E0 h webif: decompressed 149217 bytes back into 362100 bytes
2014/09/18 21:45:14 14ED0E0 h HTTP Server running. ip=192.168.178.44 port=16002
2014/09/18 21:46:14 14EB2B0 r sky [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2014/09/18 21:46:14 14EB2B0 r sky [smartreader] Cannot open device: /dev/ttyUSB0
Werd mal die Serial auslesen und dann eintragen (aber erst morgen).

Danke erst mal....
 
AW: Fehlermeldungen im LOG

"Wrong device format" im Log. Brauchst Serial...
 
OK, werd ich auslesen und dann mal eintragen.

Danke, schönen Abend noch

Habe jetzt folgendes eingestellt:

oscam.server:
[reader]
label = sky
#protocol = smartreader
#device = SRv2;Serial:12345678
protocol = smargo
device = /dev/ttyUSB0
smargopatch = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
ident = 098C:000000
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

bekomme diesen log:

  • 2014/09/21 13:59:38 99E2B0 r sky [smargo] Calculated work ETU is 4.35 us reader mhz = 534
  • 2014/09/21 13:59:38 99E2B0 r sky [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
  • 2014/09/21 13:59:39 99E2B0 r sky [smargo] Card type: P1TV
  • 2014/09/21 13:59:39 99E2B0 r sky [smargo] Rom version: 20AA
  • 2014/09/21 13:59:40 99E2B0 r sky [smargo] Credit available on card: 0 euro
  • 2014/09/21 13:59:40 99E2B0 r sky [smargo] Extended 4C detected
  • 2014/09/21 13:59:40 99E2B0 r sky [smargo] FuseByte: 25
  • 2014/09/21 13:59:40 99E2B0 r sky [smargo] Region Code: 00BO0102
  • 2014/09/21 13:59:40 99E2B0 r sky [smargo] Country Code: DEU
  • 2014/09/21 13:59:41 99E2B0 r sky [smargo] Pincode read: xxxx (#mein Pin)
  • 2014/09/21 13:59:41 99E2B0 r sky [smargo] PCB settings: FF FF FF FF
  • 2014/09/21 13:59:41 99E2B0 r sky [smargo] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
  • 2014/09/21 13:59:41 99E2B0 r sky [smargo] serial: ########, BoxID: ########, baseyear: 2004
  • 2014/09/21 13:59:41 99E2B0 r sky [smargo] ready for requests
  • 2014/09/21 13:59:41 99E2B0 r sky [smargo] found card system videoguard2
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] card detected
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 0046, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 0065, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 0066, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 0067, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 0069, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 006a, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 006b, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 006f, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 007b, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 007d, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 0081, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 008e, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:41 99E2B0 r sky [videoguard2] tier: 00c0, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00c7, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00c8, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00c9, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00e4, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00e5, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00f3, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00fa, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:42 99E2B0 r sky [videoguard2] tier: 00ff, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 13:59:56 0 s init for all local cards done
  • 2014/09/21 13:59:56 0 s anti cascading disabled
  • 2014/09/21 13:59:56 9AD6E0 c anonymous disconnected from 192.168.178.24
  • 2014/09/21 13:59:56 0 --- Skipped 1 duplicated log lines ---
  • 2014/09/21 13:59:56 9AF510 c encrypted cccam-client 192.168.178.24 granted (test, au=auto (1 reader))
  • 2014/09/21 14:01:06 9AF510 c test disconnected from 192.168.178.24
  • 2014/09/21 14:01:07 9B2DA8 c encrypted cccam-client 192.168.178.24 granted (test, au=auto (1 reader))

komischerweise war ein mal hell (!), habe am receiver umgeschaltet, dann wieder dunkel.
was mich wundert ist 'videoguard2' , das hatte ich noch nie

mit 'smartreader' geht gar nix, weiß nicht, ob ich da was falsches eingetragen hab

vielleicht fällt einem von euch etwas auf

LG
RL

Man gibt ja nie auf......

Habs mit 'smartreader' nochmal versucht.

oscam.server:

[reader]
label = sky
protocol = smartreader
device = SRv2;Serial:12345678
#protocol = smargo
#device = /dev/ttyUSB0
smargopatch = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
ident = 098C:000000
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
gibt folgenden log:

  • 2014/09/21 14:23:48 99E2B0 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2014/09/21 14:23:50 99E2B0 r sky [smartreader] Card type: P1TV
  • 2014/09/21 14:23:50 99E2B0 r sky [smartreader] Rom version: 20AA
  • 2014/09/21 14:23:50 99E2B0 r sky [smartreader] Credit available on card: 0 euro
  • 2014/09/21 14:23:50 99E2B0 r sky [smartreader] Extended 4C detected
  • 2014/09/21 14:23:50 99E2B0 r sky [smartreader] FuseByte: 25
  • 2014/09/21 14:23:50 99E2B0 r sky [smartreader] Region Code: 00BO0102
  • 2014/09/21 14:23:50 99E2B0 r sky [smartreader] Country Code: DEU
  • 2014/09/21 14:23:51 99E2B0 r sky [smartreader] Pincode read: xxxx
  • 2014/09/21 14:23:51 99E2B0 r sky [smartreader] PCB settings: FF FF FF FF
  • 2014/09/21 14:23:51 99E2B0 r sky [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
  • 2014/09/21 14:23:51 99E2B0 r sky [smartreader] serial: ########, BoxID: ########, baseyear: 2004
  • 2014/09/21 14:23:51 99E2B0 r sky [smartreader] ready for requests
  • 2014/09/21 14:23:51 99E2B0 r sky [smartreader] found card system videoguard2
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] card detected
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 0046, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 0065, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 0066, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 0067, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 0069, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 006a, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 006b, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 006f, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 007b, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 007d, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 0081, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 008e, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:51 99E2B0 r sky [videoguard2] tier: 00c0, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00c7, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00c8, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00c9, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00e4, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00e5, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00f3, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00fa, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:23:52 99E2B0 r sky [videoguard2] tier: 00ff, expiry date: 2015/01/04-00:00:00
  • 2014/09/21 14:24:06 0 s init for all local cards done
  • 2014/09/21 14:24:06 0 s anti cascading disabled
  • 2014/09/21 14:24:06 9AF470 c anonymous disconnected from 192.168.178.24
  • 2014/09/21 14:24:10 0 --- Skipped 1 duplicated log lines ---
  • 2014/09/21 14:24:10 9B4770 c encrypted cccam-client 192.168.178.24 granted (test, au=auto (1 reader))

trotzdem immer noch alles dunkel....

Ich weiß nicht warum, scheinbar gibts noch Wunder....:emoticon-0123-party

Hab den Receiver neu gestartet und alles ist hell!!!!

Log:

  • 2014/09/21 14:40:53 99E2B0 r sky [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 tag 0F: 00 00 20 00 00 03, please report to the developers with decrypted ins54
  • 2014/09/21 14:40:53 9AD480 c test (098C&000000/0C1E/006B/98:22292708323ADEFDE4F75C61DCC2912C): not found (239 ms) by sky
  • 2014/09/21 14:41:00 99E2B0 r sky [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 tag 0F: 00 00 20 00 00 03, please report to the developers with decrypted ins54
  • 2014/09/21 14:41:00 9AD480 c test (098C&000000/0C1E/006B/98:CEF23708A010B3C11BA95C244E8762BF): not found (236 ms) by sky
  • 2014/09/21 14:41:03 9AD480 c test (098C&000000/012D/000A/98FBAF0B67ED24CBE52A52BC6E2D0C00A): found (263 ms) by sky
  • 2014/09/21 14:41:10 9AD480 c test (098C&000000/012E/000B/98:00F0641C0D0AD956903E9D5AB24758D5): found (261 ms) by sky
  • 2014/09/21 14:41:17 9AD480 c test (098C&000000/012E/000B/988F51D8134BB7823C1D127292DCE1A04): found (262 ms) by sky
  • 2014/09/21 14:41:18 9AD480 c test (098C&000000/012F/002B/98:C56B35FEA54FDE3F77584E28CBE88071): found (263 ms) by sky
  • 2014/09/21 14:41:27 9AD480 c test (098C&000000/012F/002B/98:B9D16463B4910D8E29E8F7AF005C0A84): found (264 ms) by sky
  • 2014/09/21 14:41:37 9AD480 c test (098C&000000/012F/002B/98:7539086FA0A5F435DCACB7E0824D6089): found (262 ms) by sky
  • 2014/09/21 14:41:38 9AD480 c test (098C&000000/0065/0029/98:9E5A9361806B28C89E637FB3C0DB2F45): found (261 ms) by sky
  • 2014/09/21 14:41:44 9AD480 c test (098C&000000/0065/0029/98:217C18A60E0B7290998E84FB1DCA5957): found (262 ms) by sky
  • 2014/09/21 14:41:47 9AD480 c test (098C&000000/012F/002B/98:9293C6737ABBB84171342BC11768F850): found (261 ms) by sky
  • 2014/09/21 14:41:51 9AD480 c test (098C&000000/012E/000B/98:740118EA3A6D5354AC05C083D176E6AC): found (265 ms) by sky
  • 2014/09/21 14:41:57 9AD480 c test (098C&000000/012E/000B/98:A06B349058E9B9B7FCA4EC2A90A6AB7E): found (262 ms) by sky
  • 2014/09/21 14:42:07 9AD480 c test (098C&000000/012E/000B/98:80130114FF40DD78C44377FD21CA601F): found (261 ms) by sky
  • 2014/09/21 14:42:17 9AD480 c test (098C&000000/012E/000B/98:0DE5FACE130F397F98F799B8EB434C3B): found (262 ms) by sky
  • 2014/09/21 14:42:27 9AD480 c test (098C&000000/012E/000B/98:771BE0497FBAFB8C430E5BFDE06D955A): found (262 ms) by sky
  • 2014/09/21 14:42:37 9AD480 c test (098C&000000/012E/000B/98:0A9D4E3B18DB74AD6A62DF72C30E99D7): found (262 ms) by sky
  • 2014/09/21 14:42:39 9AD480 c test (098C&000000/0132/0014/98:A1F9126A83EE7EDB9F31FE36DE34CE5C): found (263 ms) by sky
  • 2014/09/21 14:42:47 9AD480 c test (098C&000000/0132/0014/98:894444ECEFD499DE9B85A749C8D46A55): found (263 ms) by sky
  • 2014/09/21 14:42:57 9AD480 c test (098C&000000/0132/0014/98:0CEA87C3B283A6E9437F9631DCAEA345): found (263 ms) by sky
  • 2014/09/21 14:43:07 9AD480 c test (098C&000000/025D/010B/98:8DC288E1BF724C58E5EFAEBAEF9FBC09): found (262 ms) by sky
  • 2014/09/21 14:43:11 9AD480 c test (098C&000000/025D/010B/98:2A281F289D58B00C65FFCE56E066DF0E): found (261 ms) by sky
  • 2014/09/21 14:43:20 9AD480 c test (098C&000000/1006/0066/97:01447871CCB3F09971A8A3A13D58A7EE): found (264 ms) by sky
  • 2014/09/21 14:43:22 9AD480 c test (098C&000000/1006/0066/97:E6185D1BD14EC3B6794EFD8641A726AC): found (263 ms) by sky
  • 2014/09/21 14:43:25 9AD480 c test (098C&000000/0C1F/0069/98:C75D25EDD1DC117D7E9AAC53755EEA07): found (263 ms) by sky
  • 2014/09/21 14:43:31 9AD480 c test (098C&000000/0C1F/0069/98:7C0717921084D5559C0F7FCDF62B7CBF): found (262 ms) by sky
  • 2014/09/21 14:43:38 9AD480 c test (098C&000000/0C1F/0069/98:599423B960572EA9B4417069B6547B90): found (263 ms) by sky
  • 2014/09/21 14:43:45 9AD480 c test (098C&000000/0C1F/0069/98:A2ED6CFD6C62B3DEE1982E588BE34535): found (263 ms) by sky
  • 2014/09/21 14:43:52 9AD480 c test (098C&000000/0C1F/0069/98:3B7DDBE1B059295FE01C16D97A609F65): found (261 ms) by sky
  • 2014/09/21 14:43:59 9AD480 c test (098C&000000/0C1F/0069/98:0604C8BE80025044F4CFDABED27A5081): found (264 ms) by sky


FETTES DANKE an alle!!!!
 
Zuletzt bearbeitet von einem Moderator:
AW: Fehlermeldungen im LOG

Hallo,
hab mal wieder Problemchen:fie:

Hatte einen Stromausfall und nach neustart bekomme ich folgenden Log:

  • 2014/10/13 09:59:46 135C3E0 r sky [smartreader] creating thread for device SRv2;Serial:12345678
  • 2014/10/13 09:59:46 134A2B0 r sky [smartreader] Reader initialized (device=SRv2;Serial:12345678, detect=cd, mhz= AUTO, cardmhz=369)
  • 2014/10/13 09:59:47 134A2B0 r sky [smartreader] card detected
  • 2014/10/13 09:59:53 134A2B0 r sky [smartreader] ATR: 3F 03 40 37 5B
  • 2014/10/13 09:59:53 134A2B0 r sky [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
  • 2014/10/13 09:59:53 134A2B0 r sky [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
  • 2014/10/13 09:59:53 134A2B0 r sky [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
  • 2014/10/13 09:59:53 134A2B0 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2014/10/13 09:59:54 134A2B0 r sky [smartreader] card system not supported
  • 2014/10/13 09:59:54 134A2B0 r sky [smartreader] Normal mode failed, reverting to Deprecated Mode
  • 2014/10/13 10:00:02 134A2B0 r sky [smartreader] Error activating card.
  • 2014/10/13 10:00:08 134A2B0 r sky [smartreader] ATR: 3F 03 40 37 5B
  • 2014/10/13 10:00:08 134A2B0 r sky [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
  • 2014/10/13 10:00:08 134A2B0 r sky [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
  • 2014/10/13 10:00:08 134A2B0 r sky [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
  • 2014/10/13 10:00:09 134A2B0 r sky [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2014/10/13 10:00:10 134A2B0 r sky [smartreader] card system not supported
  • 2014/10/13 10:00:10 134A2B0 r sky [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2014/10/13 10:00:10 134A2B0 r sky [smartreader] card initializing error

Habe nichts verändert!

Hat jemand eine Idee, warum das auf einmal nicht mehr funzt?
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

A
DD MaxS8 / TVH 4.3 / Ubuntu 24.04 nur 7 Tuner
Antworten
2
Aufrufe
216
Angrydad
A
M
Nokia Streaming Box Probleme bei der Installation von Apps
2
Antworten
16
Aufrufe
898
Erg.Vurmaz
E
B
OSCam WebIF "Live Log" bleibt leer
2
Antworten
27
Aufrufe
2K
kitte888
L
gelöst OScam mit HD05 komisches Verhalten / Bild dunkel
2
Antworten
25
Aufrufe
654
d2z
D
gelöst Probleme nach Box wechsel
2
Antworten
25
Aufrufe
770
Polarlander
P
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…