Habe ebenfalls ein Raspi mit 9921 Oscam

[krokofox]

High,

Müste mich hier auch mal ein klinken. Habe ebenfalls ein Raspi mit 9921 Oscam und mein Log sagt mir jeder erdenklichen config das gleiche
Versuche das nun seit mehr als 2 Tagen zu lösen... jemand noch ne idee ?

Log:

Spoiler

• 2015/02/23 17:59:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9921 (arm-linux-gnueabihf)
• 2015/02/23 17:59:21 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 4128
• 2015/02/23 17:59:21 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/02/23 17:59:21 0 s signal handling initialized
• 2015/02/23 17:59:21 0 s cs357x: initialized (fd=5, port=12345)
• 2015/02/23 17:59:21 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
• 2015/02/23 17:59:21 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/02/23 17:59:21 0 s waiting for local card init
• 2015/02/23 17:59:21 1605E0 h webif: decompressed 149826 bytes back into 364788 bytes
• 2015/02/23 17:59:21 1605E0 h HTTP Server running. ip=0.0.0.0 port=1234
• 2015/02/23 17:59:21 15E7B0 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
• 2015/02/23 17:59:22 15E7B0 r V14 [mouse] card detected
• 2015/02/23 17:59:26 15E7B0 r V14 [mouse] Error activating card.
• 2015/02/23 17:59:34 0 --- Skipped 2 duplicated log lines ---
• 2015/02/23 17:59:34 15E7B0 r V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/02/23 17:59:34 15E7B0 r V14 [mouse] card initializing error
• 2015/02/23 17:59:35 0 s init for all local cards done
• 2015/02/23 17:59:35 0 s anti cascading disabled

oscam.server:

Spoiler

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 358
cardmhz = 358
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

Wäre echt dankbar für Hilfe

 

[dodo83]

AW: V14 in Raspberry aktivieren

Karte wird nicht eingelesen, wie ist der Reader eingestellt erstmal?

 

[krokofox]

AW: V14 in Raspberry aktivieren

3,3V Phoenix, 3,58Mhz, Oben

Die grüne LED Blink relativ konstant beim reinschieben der Karte. Vlt. 6 mal und dann kommt die Fehlermeldung. Falls das was zu bedeutet hat.

 

[dodo83]

AW: V14 in Raspberry aktivieren

die LED´s blinken auch nur beim hereinschieben und dann wenn Traffic ensteht

Easymouse:

3,3V Phoenix Pfeil 6MHZ

im Reader MHZ auf 600 einstellen und neu starten

 

[krokofox]

AW: V14 in Raspberry aktivieren

Leider gleiches Ergebniss Log sagt genau das gleiche..

Denk das meine Mouse was hat

Reciht es eigentlich die OSCam nur neu zu starten oder den gesammten Rasp ?

 

[dodo83]

AW: V14 in Raspberry aktivieren

posten bitte

Hub dazwischen?
wenn nicht, wie stark ist das Netzteil?

 

[krokofox]

AW: V14 in Raspberry aktivieren

Log:

Spoiler

• 2015/02/23 18:36:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9921 (arm-linux-gnueabihf)
• 2015/02/23 18:36:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8574
• 2015/02/23 18:36:29 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/02/23 18:36:29 0 s signal handling initialized
• 2015/02/23 18:36:29 0 s monitor: initialized (fd=5, port=988)
• 2015/02/23 18:36:29 0 s cccam: initialized (fd=6, port=12000)
• 2015/02/23 18:36:29 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
• 2015/02/23 18:36:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/02/23 18:36:29 0 s waiting for local card init
• 2015/02/23 18:36:29 160660 h webif: decompressed 149826 bytes back into 364788 bytes
• 2015/02/23 18:36:29 160660 h HTTP Server running. ip=0.0.0.0 port=1234
• 2015/02/23 18:36:29 15E830 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
• 2015/02/23 18:36:30 15E830 r V14 [mouse] card detected
• 2015/02/23 18:36:34 15E830 r V14 [mouse] Error activating card.
• 2015/02/23 18:36:42 0 --- Skipped 2 duplicated log lines ---
• 2015/02/23 18:36:42 15E830 r V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/02/23 18:36:42 15E830 r V14 [mouse] card initializing error
• 2015/02/23 18:36:43 0 s init for all local cards done
• 2015/02/23 18:36:43 0 s anti cascading disabled

USB Hub ja 4 Port / Netzteil 5V / 1 A

Das Netzteil is vom HUB

Dsas Netzteil vom Rasp 750ma

 

[bombadil]

AW: V14 in Raspberry aktivieren

Hi,

• 2015/02/23 18:36:29 15E830 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)

Hier hast du in der oscam.server nicht mhz = 600 eingestellt

Grüße

 

[krokofox]

AW: V14 in Raspberry aktivieren

:-( Sorry mein Fehler

Trotzdem kein Erfolg.

Spoiler

• 2015/02/23 18:46:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9921 (arm-linux-gnueabihf)
• 2015/02/23 18:46:34 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2474
• 2015/02/23 18:46:34 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/02/23 18:46:34 0 s signal handling initialized
• 2015/02/23 18:46:34 0 s monitor: initialized (fd=5, port=988)
• 2015/02/23 18:46:34 0 s cccam: initialized (fd=6, port=12000)
• 2015/02/23 18:46:34 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
• 2015/02/23 18:46:34 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/02/23 18:46:34 0 s waiting for local card init
• 2015/02/23 18:46:34 1DAE660 h webif: decompressed 149826 bytes back into 364788 bytes
• 2015/02/23 18:46:34 1DAE660 h HTTP Server running. ip=0.0.0.0 port=1234
• 2015/02/23 18:46:34 1DAC830 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=358)
• 2015/02/23 18:46:35 1DAC830 r V14 [mouse] card detected
• 2015/02/23 18:46:39 1DAC830 r V14 [mouse] Error activating card.
• 2015/02/23 18:46:47 0 --- Skipped 2 duplicated log lines ---
• 2015/02/23 18:46:47 1DAC830 r V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/02/23 18:46:47 1DAC830 r V14 [mouse] card initializing error
• 2015/02/23 18:46:48 0 s init for all local cards done
• 2015/02/23 18:46:48 0 s anti cascading disabled

 

[bombadil]

AW: V14 in Raspberry aktivieren

Hi,

dritter und vierter Schalter waren beide oben?

Grüße
Bombadil

 

[krokofox]

AW: V14 in Raspberry aktivieren

Ja, beide oben

 

[bombadil]

AW: V14 in Raspberry aktivieren

Starte den Server mit den Einstellungen neu.

Grüße

 

[krokofox]

AW: V14 in Raspberry aktivieren

Leider keine Besserung.

Spoiler

• 2015/02/23 18:17:25 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9921 (arm-linux-gnueabihf)
• 2015/02/23 18:17:25 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2178
• 2015/02/23 18:17:25 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/02/23 18:17:25 0 s signal handling initialized
• 2015/02/23 18:17:25 0 s monitor: initialized (fd=5, port=988)
• 2015/02/23 18:17:25 0 s cccam: initialized (fd=6, port=12000)
• 2015/02/23 18:17:25 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
• 2015/02/23 18:17:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/02/23 18:17:25 0 s waiting for local card init
• 2015/02/23 18:17:25 739660 h webif: decompressed 149826 bytes back into 364788 bytes
• 2015/02/23 18:17:25 739660 h HTTP Server running. ip=0.0.0.0 port=1234
• 2015/02/23 18:17:26 737830 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=358)
• 2015/02/23 18:17:26 737830 r V14 [mouse] card detected
• 2015/02/23 18:17:30 737830 r V14 [mouse] Error activating card.
• 2015/02/23 19:03:23 0 --- Skipped 2 duplicated log lines ---
• 2015/02/23 19:03:23 737830 r V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/02/23 19:03:23 737830 r V14 [mouse] card initializing error
• 2015/02/23 19:03:24 0 s init for all local cards done
• 2015/02/23 19:03:24 0 s anti cascading disabled

 

[bombadil]

AW: V14 in Raspberry aktivieren

dann versuch mal Cardmhz = 357

Grüße
Bombadil

 

[dodo83]

AW: V14 in Raspberry aktivieren

mal direkt am PI testen
oder auch mal mit 5V
oder auch mal anderen Reader falls vorhanden