Kriege V14 im internen Slot nicht zum Laufen

[Pilot]

AW: Kriege V14 im internen Slot nicht zum Laufen

stimmt cardok steht da.
aber falsche entis, falsches Cardsystem und falsche Serial

Spoiler

[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"]emu
[/TD]
[TD="colspan: 2"]n/a
[/TD]
[TD]FF FF FF FF [/TD]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]00 00 00 00
[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4"]3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03 [/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000020[/TD]
[TD]00[/TD]
[TD]A40403143ECB6220DA180E54851451EF[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000020[/TD]
[TD]06[/TD]
[TD]239091781C7E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000030[/TD]
[TD]00[/TD]
[TD]BDD3A8E93764FFDB1D3866CF974A4077[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D00[/TD]
[TD]000030[/TD]
[TD]06[/TD]
[TD]239091781C7E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000004[/TD]
[TD]00[/TD]
[TD]A9D732F5E738E48A91C8638B12746661[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000004[/TD]
[TD]06[/TD]
[TD]0987CF2A611D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000010[/TD]
[TD]00[/TD]
[TD]00006AB325E6ABF4DA47280F35294B5C[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000010[/TD]
[TD]01[/TD]
[TD]0000000000000000307E4DAC065BA686[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D05[/TD]
[TD]000010[/TD]
[TD]06[/TD]
[TD]0987CF2A611D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000004[/TD]
[TD]06[/TD]
[TD]27B488348D54[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000004[/TD]
[TD]00[/TD]
[TD]000000000000000019E8F524C6C053E4[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000008[/TD]
[TD]06[/TD]
[TD]27B488348D54[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0D03[/TD]
[TD]000008[/TD]
[TD]01[/TD]
[TD]000000000000000042F07BE920C7E0F3[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]007400[/TD]
[TD]08[/TD]
[TD]2FB60239D4D8C4D6[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]D1[/TD]
[TD]0B552C11AF0A2FB8[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]X1[/TD]
[TD]3D1229C2ED29C130[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]P1[/TD]
[TD]0304000207050106[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]C1[/TD]
[TD]DA4E0B42134F433B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]023800[/TD]
[TD]T1[/TD]
[TD]495EE3839DD6544AF23FC1EC7C684D973CF873926F1CF0F586DA31A1156B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]T1[/TD]
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
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]D1[/TD]
[TD]89CBB54EEB94E350[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]X1[/TD]
[TD]8B2908AE39B0101A[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]P1[/TD]
[TD]0704020305000601[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]C1[/TD]
[TD]FC3C5F15D7A0B437[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E0[/TD]
[TD]439726EBB6A939A456C05FF6AA606C43[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E1[/TD]
[TD]A79AC0DBEC9C9251D1915F058862AF26[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]EC[/TD]
[TD]9A3EAB0203EBFFCA85B4F18280749F56[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]ED[/TD]
[TD]2504B382B16D8C6758DB960E311E9351[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]EE[/TD]
[TD]349883E54D58336DCA750A878ACC5CD5[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E14[/TD]
[TD]6B1B024D36F60974973CB81FA5E8F01C[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E15[/TD]
[TD]127003F8E95100367A556121C779FB6E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]E2[/TD]
[TD]EF3CB8D36A862097A33FC47101041BE3[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]08[/TD]
[TD]D92A82E3111C9AFDED4626AD0B542E5B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]09[/TD]
[TD]CC72AAFE5265D6D04608E832CEB9EC4D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]0A[/TD]
[TD]EE2679604A7DDD32E4F8CB913500D38E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]030B00[/TD]
[TD]0B[/TD]
[TD]7C6A2428C020023B163E4FE024FF5D9D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]T1[/TD]
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
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]D1[/TD]
[TD]536D1D0DC041D468[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]X1[/TD]
[TD]8DE3666B8CB0B00B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]P1[/TD]
[TD]0106000203050407[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]C1[/TD]
[TD]1332DB1E6775561E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]08[/TD]
[TD]DFB61C951AE2C57BDE0D4887B9614295[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]09[/TD]
[TD]6585A93F605B570F2D2C2FC1926BAB65[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0500[/TD]
[TD]022610[/TD]
[TD]0C[/TD]
[TD]A1EE84B9498D875B68AD6C98B425C50D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003A01[/TD]
[TD]00[/TD]
[TD]6FCAEDFBBE4A97BB[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003A01[/TD]
[TD]01[/TD]
[TD]CFFCAE4981431683[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003B01[/TD]
[TD]00[/TD]
[TD]6FCAEDFBBE4A97BB[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]003B01[/TD]
[TD]01[/TD]
[TD]CFFCAE4981431683[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]007301[/TD]
[TD]M1[/TD]
[TD]7544E982065D53E7CF049AF2E725544A50268DA1462F15D8A197ECE4B80FE221122F92AD56324380A04878EBF563427DD85C38645907583E23AC5153E300CF84[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]007301[/TD]
[TD]00[/TD]
[TD]79E8FDEB4EAB120892F68D6319993283[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]007301[/TD]
[TD]01[/TD]
[TD]67268A474ED5A53867A2813A639D0F6A[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]001101[/TD]
[TD]M1[/TD]
[TD]C75C2FECF494F6DD71BBF898C63F7FEBA11345DF14C71EE656BC23016C2F90A881429B82A68C095E472C997752D5890341CF9E06691672482718750B918AAE92[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]001101[/TD]
[TD]00[/TD]
[TD]9AF11CE0871C97911FFF4099851B867D[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]001101[/TD]
[TD]01[/TD]
[TD]FAD9E99827B3D66B624FA382E52615E1[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]00C102[/TD]
[TD]M1[/TD]
[TD]3122D1C22907B398DC253FEA29D03385971FD3DFBBD5235A531959E94C86637847DDE58E6E8997A411D7031F8AA0CB0A3EBB7C420E043B31F6EADA31100C2AA0[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]00C102[/TD]
[TD]00[/TD]
[TD]5BCE65625FA4ED509594CE7C4B907ECB[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]00C102[/TD]
[TD]01[/TD]
[TD]D7CBE93D30E2C9139107387457DB9023[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]004B11[/TD]
[TD]M1[/TD]
[TD]3D4737225FFC0A5727425FFA34122F04022F02053544532502D52454C5F312E312E330020222F262E0220222F28240C60BB7776262599A444B522F07824A8783[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]004B11[/TD]
[TD]00[/TD]
[TD]E91C4FB7A66BF0AD478B0A1C45BDDFB4[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]1801[/TD]
[TD]004B11[/TD]
[TD]01[/TD]
[TD]2266AF30B15420796AB3BB6717625902[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]M1[/TD]
[TD]98B4DCAD44E8C9504C3F4E51692A7047[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]M2[/TD]
[TD]AE652B210BF89FC69507609842FD303E[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]02[/TD]
[TD]DFDD0C4B92B4ABD26514B9AF9F0C79C4[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]04[/TD]
[TD]731BB81185609CFA22F8B039C253E3BD[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[TR="class: e_valid"]
[TD]key[/TD]
[TD]0604[/TD]
[TD]000000[/TD]
[TD]06[/TD]
[TD]DB88B668A980CDBBCD8B06CE49A0BA6B[/TD]
[TD][/TD]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]

• OSCAM Webinterface developed by Streamboard Team
• • Current Time: 21.09.14 | 10:37:01
  • Start Time: 20.09.14 | 23:43:49
  • Up Time: 10:53:12
• • Process ID: 9807
  • Access from: 192.168.178.44
  • Run as: root
• • OSCAM: 1.20-modern
  • Build: r1105
  • Compiler: sh4-streamboard-linux-gnu-libusb

 

[Ducktrick]

AW: Kriege V14 im internen Slot nicht zum Laufen

dann nim bitte mal das oscam emu vom addon

 

[Pilot]

AW: Kriege V14 im internen Slot nicht zum Laufen

getan: Version: oscam-1.20-EMU-HDSC-#60-9053
hier das neue dafür:

Spoiler

I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 109140k/131072k available (2701k kernel code, 807k data, 1616k init)
Hierarchical RCU implementation.
NR_IRQS:600
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 264.19 BogoMIPS (lpj=528384)
Mount-cache hash table entries: 512
CPU: STx7109
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sq: Registering store queue API.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 213
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
lirc_dev: IR Remote Control driver registered, major 61
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stm-asc
loop: module loaded
sata-stm version 0.8
sata-stm using hardware scatter/gather
sata-stm SATA version 1.00 DMA version 2.02
MiPHY driver style MiPHY-DUMMY probed successfully
MiPHY-DUMMY, c0.0 Claimed by sata-stm
scsi0 : sata-stm
ata1: SATA max UDMA/133 irq 170
physmap platform flash device: 00800000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash at offset 0x7f0000
No RedBoot partition table detected in physmap-flash
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash":
0x000000000000-0x000000040000 : "Boot (RO)"
0x000000040000-0x0000006a0000 : "jffs2 (RW)"
0x000000700000-0x000000800000 : "NAND-END (RO)"
0x000000000000-0x000000800000 : "Kompletter Nand Flash (RW) - Loeschen ohne neue
Firmware - JTAG noetig"
slram: not enough parameters.
STe100p: Registered new driver (0x1c040011)
STe101p: Registered new driver (0x00061c50)
DWMAC100
No HW DMA feature register supported
Normal descriptors
nwhw_config: (eth0) setting mac address: 00:80:e1:12:06:30
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm_usb_probe: usb_48_clk clock not found for stm-usb.0
stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
ata1: SATA link down (SStatus 0 SControl 0)
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i2c /dev entries driver
i2c_st40_pio: ST40 PIO based I2C Driver for STM24
Linux video capture interface: v2.00
usbcore: registered new interface driver ushc
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0000000 size 0x00400000
cop. addr 0x10000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0400000 size 0x00400000
cop. addr 0x10400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac handler (16 channels).
IRQ 140/fdma_dmac: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma: firmware: using built-in firmware fdma_STx7109_0.elf
platform fdma_dmac: SLIM hw 0.0, FDMA fw 4.6
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7109 cut 4.0 SOC audio subsystem
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
usb 1-1: new high speed USB device using stm-ehci and address 2
Freeing unused kernel memory: 1616k freed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:28 @2652
YWPANEL_VFD_DETECT: result=1, vfd_type=2
VfdType = 2
YWPANEL_VFD_Init: YWPANEL_VFD_Initialize(): 0 @2829
CpuType = -2077631140
DisplayInfo = 0
scankeyNum = 160
swMajorVersion = 8
swSubVersion = 193
usb 1-1.1: new high speed USB device using stm-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.4: new high speed USB device using stm-ehci and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: wait 0 seconds on usb port 1.4
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6
sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 1:0:0:0: [sda] Write Protect is off
usb-storage: device scan complete
sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
input: fulan front panel buttons as /devices/virtual/input/input0
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-1.5: new high speed USB device using stm-ehci and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 5 ports detected
usb 1-1.5.1: new high speed USB device using stm-ehci and address 6
usb 1-1.5.1: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using stm-ehci and address 7
usb 1-1.5.2: configuration #1 chosen from 1 choice
aotom_vip1: exports duplicate symbol I2C_bus_add (owned by aotom)
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
EXT2-fs: sda2: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode
Slow work thread pool: Starting up
Slow work thread pool: Ready
EXT2-fs: sda4: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode
stmcore-display: STx7109c3 display: probed
device probe found 2 display pipelines
stmfb: Starting HDMI Output hdmi = 8b150000
[DETECT] -> Boxdetect for Argus Boxes
[DETECT] -> Boxtype = Vip2
[DETECT] -> Tuner1 = sharp7306
[DETECT] -> Tuner2 = lg031
[AVS]: A/V switch handling for vip2_avs
[AVS]: init success
[AVS]: Set Encoder = (1)ON
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 2048, waitMS = 20, camRouting = 0, enableStatistic = 0)
DVB: registering new adapter (STM Streamer)
Load real TC Code
TC_Data = b9238000, TC_Code = b923c000
Readback TC ... successfull
using videoMem = 385024 (packets = 2048)
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(0) base = 525b000, top = 52b9000, buffer = 525b000, size 385024
freeBuffer(): free = 1
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(1) base = 5400000, top = 545e000, buffer = 5400000, size 385024
freeBuffer(): free = 2
pti_task: using 2 dma channel
DVB: registering adapter 0 frontend 0 (Sharp7306 Plug&Play (VIP2) )...
DVB: registering adapter 0 frontend 1 (Philips TDA10023 DVB-C)...
Free session: 0
Using session 0
Free session: 1
Using session 1
Free session: 2
Using session 2
input: TDT RC event driver as /devices/virtual/input/input1
lirc_dev: lirc_register_driver: sample_rate: 0
[AVS]: avs_command_kernel (10)
[AVS]: vip2_avs_command_kernel: SAA command (10)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set wss
[AVS]: vip2_avs_set_wss
[AVS]: avs_set_wss SAA_WSS_169F = (1)
Adding 69184k swap on /dev/sda3. Priority:-1 extents:1 across:69184k
eth0: device MAC address 00:80:e1:12:06:30
STMMAC MII Bus: probed
eth0: PHY ID 0181b8a0 at 2 IRQ 11 (0:02) active
stmmac_timer: (eth0) sh_tmu Timer (freq 256Hz)
No MAC Management Counters available
PHY: 0:02 - Link is Up - 100/Full
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
[AVS]: avs_command_kernel (5)
[AVS]: vip2_avs_command_kernel: SAA command (5)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set mode
[AVS]: vip2_avs_set_mode RGB 1
[AVS]: avs_command_kernel (11)
[AVS]: vip2_avs_command_kernel: SAA command (11)
[AVS]: vip2_avs_command_kernel SAAIOSMODE src sel
[AVS]: Not Supported (vip2_avs_src_sel)
[AVS]: avs_command_kernel (4103)
[AVS]: vip2_avs_command_kernel: AVSIOSET command
[AVS]: vip2_avs_command_kernel AVSIOSVOL set volume
[AVS]: vip2_avs_set_volume (0)
[AVS]: vip2_avs_set_volume: c = (62)
stmfb: Starting HDMI Output hdmi = 8b150000
stmhdmiio_set_audio_source - 8b150000
stmfb: Starting HDMI Output hdmi = 8b150000
[AVS]: avs_command_kernel (4104)
[AVS]: vip2_avs_command_kernel: AVSIOSET command
[AVS]: vip2_avs_command_kernel AVSIOSVOL set mute
[AVS]: type Mute 0 (SCART_AUDHI=0 Kackt beim Zappen)
[AVS]: vip2_avs_set_mute: t_mute = (0)
[AVS]: Hier Knackt es wenn SCART_AUDHI auf 0 gestellt wird f r lauteren Sound..
.pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bf4d2e8
(da 0, 1)(da 0, 2)(da 0, 3)(da 0, 3)[AVS]: avs_command_kernel (10)
[AVS]: vip2_avs_command_kernel: SAA command (10)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set wss
[AVS]: vip2_avs_set_wss
[AVS]: avs_set_wss SAA_WSS_169F = (1)
pti_buffer_free(8bf4d2e8, 385024) - delta 0x 4ef20, thr 0x1
freeBuffer(): free = 2
getBuffer(): free = 2
pti_buffer_get(385024) => 8bf4d2e8
pti_buffer_free(8bf4d2e8, 385024) - delta 0x 234, thr 0x1
freeBuffer(): free = 2
pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8bf4d2e8
(da 0, 6)(da 0, 7)
warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
[AVS]: avs_command_kernel (10)
[AVS]: vip2_avs_command_kernel: SAA command (10)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set wss
[AVS]: vip2_avs_set_wss
[AVS]: avs_set_wss SAA_WSS_169F = (1)
ArgusVIP:~#

 

[Ducktrick]

AW: Kriege V14 im internen Slot nicht zum Laufen

hast du das smartcard.ko nach /lib/modules/2.6.32.59_stm24_0211/ kopiert ? denn es erscheint ja garnix im dmesg ...

und auch nochmal nen oscam log bitte von der version

 

[Pilot]

AW: Kriege V14 im internen Slot nicht zum Laufen

smartcard.ko neu eingesetz.
Ftdi Treiber gesetz
dmesg:
Karte in der easymose2

Spoiler

=4000 coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00
:80:E1:12:06:30 init=/bin/devinit printk
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
PVR=04061100 CVR=30480000 PRR=00009300
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 109140k/131072k available (2701k kernel code, 807k data, 1616k init)
Hierarchical RCU implementation.
NR_IRQS:600
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 264.19 BogoMIPS (lpj=528384)
Mount-cache hash table entries: 512
CPU: STx7109
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
NET: Registered protocol family 8
NET: Registered protocol family 20
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
sq: Registering store queue API.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 213
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
lirc_dev: IR Remote Control driver registered, major 61
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stm-asc
loop: module loaded
sata-stm version 0.8
sata-stm using hardware scatter/gather
sata-stm SATA version 1.00 DMA version 2.02
MiPHY driver style MiPHY-DUMMY probed successfully
MiPHY-DUMMY, c0.0 Claimed by sata-stm
scsi0 : sata-stm
ata1: SATA max UDMA/133 irq 170
physmap platform flash device: 00800000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash at offset 0x7f0000
No RedBoot partition table detected in physmap-flash
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash":
0x000000000000-0x000000040000 : "Boot (RO)"
0x000000040000-0x0000006a0000 : "jffs2 (RW)"
0x000000700000-0x000000800000 : "NAND-END (RO)"
0x000000000000-0x000000800000 : "Kompletter Nand Flash (RW) - Loeschen ohne neue
Firmware - JTAG noetig"
slram: not enough parameters.
STe100p: Registered new driver (0x1c040011)
STe101p: Registered new driver (0x00061c50)
DWMAC100
No HW DMA feature register supported
Normal descriptors
nwhw_config: (eth0) setting mac address: 00:80:e1:12:06:30
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm_usb_probe: usb_48_clk clock not found for stm-usb.0
stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
ata1: SATA link down (SStatus 0 SControl 0)
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i2c /dev entries driver
i2c_st40_pio: ST40 PIO based I2C Driver for STM24
Linux video capture interface: v2.00
usbcore: registered new interface driver ushc
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0000000 size 0x00400000
cop. addr 0x10000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xb0400000 size 0x00400000
cop. addr 0x10400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac handler (16 channels).
IRQ 140/fdma_dmac: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma: firmware: using built-in firmware fdma_STx7109_0.elf
platform fdma_dmac: SLIM hw 0.0, FDMA fw 4.6
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7109 cut 4.0 SOC audio subsystem
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
usb 1-1: new high speed USB device using stm-ehci and address 2
Freeing unused kernel memory: 1616k freed
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
Fulan front panel driver
YWPANEL_VFD_DETECT: Frontcontroller I2C: 02:28 @2652
YWPANEL_VFD_DETECT: result=1, vfd_type=2
VfdType = 2
YWPANEL_VFD_Init: YWPANEL_VFD_Initialize(): 0 @2829
CpuType = -2077631140
DisplayInfo = 0
scankeyNum = 160
swMajorVersion = 8
swSubVersion = 193
usb 1-1.1: new high speed USB device using stm-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.4: new high speed USB device using stm-ehci and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: wait 0 seconds on usb port 1.4
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6
sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 1:0:0:0: [sda] Write Protect is off
usb-storage: device scan complete
sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI disk
input: fulan front panel buttons as /devices/virtual/input/input0
usb 1-1.5: new high speed USB device using stm-ehci and address 5
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 5 ports detected
usb 1-1.5.1: new high speed USB device using stm-ehci and address 6
usb 1-1.5.1: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using stm-ehci and address 7
usb 1-1.5.2: configuration #1 chosen from 1 choice
aotom_vip1: exports duplicate symbol I2C_bus_add (owned by aotom)
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
fsck.ext2: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
tune2fs: sending ioctl 127c to a partition!
EXT2-fs: sda2: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode
Slow work thread pool: Starting up
Slow work thread pool: Ready
EXT2-fs: sda4: couldn't mount because of unsupported optional features (244).
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode
stmcore-display: STx7109c3 display: probed
device probe found 2 display pipelines
stmfb: Starting HDMI Output hdmi = 8ac50000
[DETECT] -> Boxdetect for Argus Boxes
[DETECT] -> Boxtype = Vip2
[DETECT] -> Tuner1 = sharp7306
[DETECT] -> Tuner2 = lg031
[AVS]: A/V switch handling for vip2_avs
[AVS]: init success
[AVS]: Set Encoder = (1)ON
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 2048, waitMS = 20, camRouting = 0, enableStatistic = 0)
DVB: registering new adapter (STM Streamer)
Load real TC Code
TC_Data = b9238000, TC_Code = b923c000
Readback TC ... successfull
using videoMem = 385024 (packets = 2048)
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(0) base = 525b000, top = 52b9000, buffer = 525b000, size 385024
freeBuffer(): free = 1
pti: pti_buffer_pool_init: allocate 94 pages (385024 bytes)
DMA(1) base = 5400000, top = 545e000, buffer = 5400000, size 385024
freeBuffer(): free = 2
pti_task: using 2 dma channel
DVB: registering adapter 0 frontend 0 (Sharp7306 Plug&Play (VIP2) )...
DVB: registering adapter 0 frontend 1 (Philips TDA10023 DVB-C)...
Free session: 0
Using session 0
Free session: 1
Using session 1
Free session: 2
Using session 2
input: TDT RC event driver as /devices/virtual/input/input1
lirc_dev: lirc_register_driver: sample_rate: 0
[AVS]: avs_command_kernel (10)
[AVS]: vip2_avs_command_kernel: SAA command (10)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set wss
[AVS]: vip2_avs_set_wss
[AVS]: avs_set_wss SAA_WSS_169F = (1)
Adding 69184k swap on /dev/sda3. Priority:-1 extents:1 across:69184k
eth0: device MAC address 00:80:e1:12:06:30
STMMAC MII Bus: probed
eth0: PHY ID 0181b8a0 at 2 IRQ 11 (0:02) active
stmmac_timer: (eth0) sh_tmu Timer (freq 256Hz)
No MAC Management Counters available
PHY: 0:02 - Link is Up - 100/Full
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
Boxtype: Vip2[SMARTCARD] ---> Reader = 0, vcc = 5
[SMARTCARD] ---> SCI_CLASS = 1
[SMARTCARD] ---> Setting clock to: 3.57Mhz
[SMARTCARD] ---> clkdiv = 0x0E
[SMARTCARD] ---> Reader = 1, vcc = 5
[SMARTCARD] ---> SCI_CLASS = 1
[SMARTCARD] ---> Setting clock to: 3.57Mhz
[SMARTCARD] ---> clkdiv = 0x0E
Registering device 'sc', major '169'
Version of smartcard driver: [1.0.1]
usbcore: registered new interface driver ftdi_sio
[AVS]: avs_command_kernel (5)
[AVS]: vip2_avs_command_kernel: SAA command (5)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set mode
[AVS]: vip2_avs_set_mode RGB 1
[AVS]: avs_command_kernel (11)
[AVS]: vip2_avs_command_kernel: SAA command (11)
[AVS]: vip2_avs_command_kernel SAAIOSMODE src sel
[AVS]: Not Supported (vip2_avs_src_sel)
[AVS]: avs_command_kernel (4103)
[AVS]: vip2_avs_command_kernel: AVSIOSET command
[AVS]: vip2_avs_command_kernel AVSIOSVOL set volume
[AVS]: vip2_avs_set_volume (0)
[AVS]: vip2_avs_set_volume: c = (62)
stmfb: Starting HDMI Output hdmi = 8ac50000
stmhdmiio_set_audio_source - 8ac50000
stmfb: Starting HDMI Output hdmi = 8ac50000
[AVS]: avs_command_kernel (4104)
[AVS]: vip2_avs_command_kernel: AVSIOSET command
[AVS]: vip2_avs_command_kernel AVSIOSVOL set mute
[AVS]: type Mute 0 (SCART_AUDHI=0 Kackt beim Zappen)
[AVS]: vip2_avs_set_mute: t_mute = (0)
[AVS]: Hier Knackt es wenn SCART_AUDHI auf 0 gestellt wird f r lauteren Sound..
.pti_hal_set_source(): 0, 32
getBuffer(): free = 2
pti_buffer_get(385024) => 8b06a2e8
(da 0, 1)(da 0, 2)(da 0, 3)(da 0, 3)[AVS]: avs_command_kernel (10)
[AVS]: vip2_avs_command_kernel: SAA command (10)
[AVS]: vip2_avs_command_kernel SAAIOSMODE set wss
[AVS]: vip2_avs_set_wss
[AVS]: avs_set_wss SAA_WSS_169F = (1)
ArgusVIP:~#

Log auszug:

Spoiler

>> OSCam << cardserver started at Sun Sep 21 19:23:44 2014
-------------------------------------------------------------------------------
2014/09/21 19:23:44 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/09/21 19:23:44 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2014/09/21 19:23:44 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/21 19:23:44 0 s signal handling initialized
2014/09/21 19:23:44 0 s 485 service-id's loaded in 30ms
2014/09/21 19:23:44 0 s 55 tier-id's loaded
2014/09/21 19:23:44 0 s 13 provid's loaded
2014/09/21 19:23:44 0 s 48 entries read from oscam.whitelist
2014/09/21 19:23:44 0 s monitor: initialized (fd=4, port=19006)
2014/09/21 19:23:44 0 s camd35: initialized (fd=5, port=56700)
2014/09/21 19:23:44 0 s cs378x: initialized (fd=6, port=64000)
2014/09/21 19:23:44 0 s v14sat [mouse] creating thread for device /dev/ttyUSB0
2014/09/21 19:23:44 0 s anti cascading disabled
2014/09/21 19:23:44 52F5F0 c plain dvbapi-client granted (lokal, au=on (1 reader))
2014/09/21 19:23:44 52F5F0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/09/21 19:23:44 51BDA8 h webif: decompressed 232529 bytes back into 338968 bytes
2014/09/21 19:23:44 52BAF0 r v14sat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/09/21 19:23:45 51BDA8 h HTTP Server running. ip=0.0.0.0 port=83
2014/09/21 19:23:45 52F5F0 c [DVBAPI] Receiver sends PMT command 3 for channel 283D
2014/09/21 19:23:45 52F5F0 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/09/21 19:23:45 52F5F0 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0001 index 0000
2014/09/21 19:23:45 52F5F0 c New program number: 283D (0000:283D unknown) [pmt_list_management 3]
2014/09/21 19:23:45 52BAF0 r v14sat [mouse] card detected
2014/09/21 19:23:49 52BAF0 r v14sat [mouse] Error activating card.
2014/09/21 19:23:58 0 --- Skipped 2 duplicated log lines ---
2014/09/21 19:23:58 52BAF0 r v14sat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/21 19:23:58 52BAF0 r v14sat [mouse] card initializing error

reader

Spoiler

[reader]
label = v14sat
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
ins7e11 = 13
detect = cd
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
deprecated = 1
ndsversion = 2

 

[Ducktrick]

AW: Kriege V14 im internen Slot nicht zum Laufen

der Smartcard treiber passt jetzt schonmal nun musste mal intern testen...
sicher das der reader den ftdi verwendet und nicht nen pl ?
Glaube hatte iengebaut das du auch beide starten kannst, das usb0 dev findet er zwar , findet aber kein atr ...

 

[Pilot]

AW: Kriege V14 im internen Slot nicht zum Laufen

ok
Werd mal beide Treiber installieren

log für internen reader

Spoiler

>> OSCam << cardserver started at Sun Sep 21 19:54:01 2014
-------------------------------------------------------------------------------
2014/09/21 19:54:01 0 s >> OSCam << cardserver started, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/09/21 19:54:01 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2014/09/21 19:54:01 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/21 19:54:01 0 s signal handling initialized
2014/09/21 19:54:01 0 s 485 service-id's loaded in 40ms
2014/09/21 19:54:01 0 s 55 tier-id's loaded
2014/09/21 19:54:01 0 s 13 provid's loaded
2014/09/21 19:54:01 0 s 48 entries read from oscam.whitelist
2014/09/21 19:54:01 0 s monitor: initialized (fd=4, port=19006)
2014/09/21 19:54:01 0 s camd35: initialized (fd=5, port=56700)
2014/09/21 19:54:01 0 s cs378x: Bind request failed (Address already in use), waiting another 119 seconds
2014/09/21 19:54:02 0 s cs378x: initialized (fd=6, port=64000)
2014/09/21 19:54:02 0 s skyde [internal] creating thread for device /dev/sci1
2014/09/21 19:54:02 51BBA0 r skyde [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2014/09/21 19:54:02 0 s anti cascading disabled
2014/09/21 19:54:02 5300D8 c plain dvbapi-client granted (lokal, au=on (1 reader))
2014/09/21 19:54:02 5300D8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/09/21 19:54:02 52BAF0 h webif: decompressed 232529 bytes back into 338968 bytes
2014/09/21 19:54:03 51BBA0 r skyde [internal] card detected
2014/09/21 19:54:04 52BAF0 h HTTP Server running. ip=0.0.0.0 port=83
2014/09/21 19:54:13 51BBA0 r skyde [internal] Error activating card.
2014/09/21 19:54:33 0 --- Skipped 2 duplicated log lines ---
2014/09/21 19:54:33 51BBA0 r skyde [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/21 19:54:33 51BBA0 r skyde [internal] card initializing error
2014/09/21 19:54:51 5300D8 c [DVBAPI] Receiver sends PMT command 3 for channel 283D
2014/09/21 19:54:51 5300D8 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/09/21 19:54:51 5300D8 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0001 index 0000
2014/09/21 19:54:51 5300D8 c New program number: 283D (0000:283D unknown) [pmt_list_management 3]
2014/09/21 19:54:52 5300D8 c [DVBAPI] Receiver sends PMT command 3 for channel 283D
2014/09/21 19:54:52 5300D8 c Found 0 ECMpids and 10 STREAMpids in PMT
2014/09/21 19:54:52 5300D8 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0001 index 0000
2014/09/21 19:54:52 5300D8 c New program number: 283D (0000:283D unknown) [pmt_list_management 3]
2014/09/21 20:03:04 52BAF0 h skyde [internal] Restarting reader
2014/09/21 20:03:04 52BAF0 h skyde [internal] creating thread for device /dev/sci1
2014/09/21 20:03:04 29A01308 r skyde [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2014/09/21 20:03:04 29A01308 r skyde [internal] card detected
2014/09/21 20:03:14 29A01308 r skyde [internal] Error activating card.
2014/09/21 20:03:34 0 --- Skipped 1 duplicated log lines ---
2014/09/21 20:03:34 0 --- Skipped 1 duplicated log lines ---
2014/09/21 20:03:34 29A01308 r skyde [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/21 20:03:34 29A01308 r skyde [internal] card initializing error

externer reader

Spoiler

>> OSCam << cardserver log switched at Sun Sep 21 20:10:35 2014
-------------------------------------------------------------------------------
2014/09/21 20:10:35 51BD08 h >> OSCam << cardserver log switched, version 1.20-EMU-HDSC build #60-9053 (sh4-linux)
2014/09/21 20:11:01 51BD08 h v14sat [mouse] Restarting reader
2014/09/21 20:11:01 51BD08 h v14sat [mouse] creating thread for device /dev/ttyUSB0
2014/09/21 20:11:01 56E6A8 r v14sat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/09/21 20:11:02 56E6A8 r v14sat [mouse] card detected
2014/09/21 20:11:06 56E6A8 r v14sat [mouse] Error activating card.
2014/09/21 20:11:14 0 --- Skipped 1 duplicated log lines ---
2014/09/21 20:11:14 0 --- Skipped 1 duplicated log lines ---
2014/09/21 20:11:14 56E6A8 r v14sat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/21 20:11:14 56E6A8 r v14sat [mouse] card initializing error

 

[Ducktrick]

AW: Kriege V14 im internen Slot nicht zum Laufen

die karte bringt garkeinen atr ?! das ja komisch.
mal mit mhz = 500 versucht

 

[Pilot]

AW: Kriege V14 im internen Slot nicht zum Laufen

teste jetzt verschiedene Einstellungen
alle Einstellungen durchgetestet: immer error.

neuste oscam Version genommen : ATR Nr. erscheint. Trotzdem error
log

Spoiler

014/09/21 23:14:01 50D6D8 h skyde [internal] Restarting reader
2014/09/21 23:14:01 50D6D8 h skyde [internal] creating thread for device /dev/sci1
2014/09/21 23:14:02 2A104550 r skyde [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2014/09/21 23:14:02 2A104550 r skyde [internal] card detected
2014/09/21 23:14:02 2A104550 r skyde [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/21 23:14:02 2A104550 r skyde [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/21 23:14:02 2A104550 r skyde [internal] Calculated work ETU is 18.60 us reader mhz = 500
2014/09/21 23:14:03 2A104550 r skyde [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/09/21 23:14:05 2A104550 r skyde [internal] card system not supported
2014/09/21 23:14:05 2A104550 r skyde [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/21 23:14:05 2A104550 r skyde [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/09/21 23:14:05 2A104550 r skyde [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/09/21 23:14:05 2A104550 r skyde [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/09/21 23:14:06 2A104550 r skyde [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/09/21 23:14:09 2A104550 r skyde [internal] card system not supported
2014/09/21 23:14:09 2A104550 r skyde [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/21 23:14:09 2A104550 r skyde [internal] card initializing error

 

[Ducktrick]

AW: Kriege V14 im internen Slot nicht zum Laufen

tja dann tuts mir leid ist mir echt nen rätzel was da nicht gehen soll

 

[extra]

AW: Kriege V14 im internen Slot nicht zum Laufen

2014/09/21 23:14:09 2A104550 r skyde [internal] card system not supported

Das deutet für mich darauf hin, das die entsprechenden Treiber nicht installiert sind, bzw. nicht gefunden wurden, ob vom Image, oder von dem Kartenleser

 

[Ducktrick]

AW: Kriege V14 im internen Slot nicht zum Laufen

nene , würde es am treiber liegen würde er sagen das er das dev nicht öffnen kann, aber selbst wenns intern nicht geht hätte der reader die katre öffnen MÜSSEN über usbserial, und das geht ja auch nicht, das ist eben komisch ...und wenn nur ein externer reader dran ist dann ist es normalerweise ttyUSB0

 

[Pilot]

AW: Kriege V14 im internen Slot nicht zum Laufen

hab jetzt erfolgreich mit einem Pingulux und openatv2 die V14 zum Laufen bekommen im internen reader. Der Pingulux ist ja auch ein sh4 Receiver wie der VIP mit dem Ducktrickimage.
https://www.digital-eliteboard.com/...90-zum-laufen-gebracht-haben.html#post2380961
dmesg

Spoiler

eth0: PHY ID 00000000 at 30 IRQ 0 (0:1e)
eth0: PHY ID 00000000 at 31 IRQ 0 (0:1f)
nwhw_config: (eth0) setting mac address: 24:00:08:00:0c:c6
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
Linux video capture interface: v2.00
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa0000000 size 0x00400000
cop. addr 0x40000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa0400000 size 0x00400000
cop. addr 0x40400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac.0 handler (16 channels).
IRQ 140/fdma_dmac.0: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma.0: firmware: using built-in firmware fdma_STx7111_0.elf
DMA: Registering fdma_dmac.1 handler (16 channels).
platform fdma_dmac.0: SLIM hw 0.0, FDMA fw 2.1
IRQ 141/fdma_dmac.1: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma.1: firmware: using built-in firmware fdma_STx7111_1.elf
platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 2.5
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7111 cut 3.x SOC audio subsystem
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usb 1-1: new high speed USB device using stm-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
eth0: device MAC address 24:00:08:00:0c:c6
No MAC Management Counters available
IP-Config: Complete:
device=eth0, addr=172.100.100.249, mask=255.255.0.0, gw=172.100.100.174,
host=LINUX7109, domain=, nis-domain=(none),
bootserver=172.100.100.174, rootserver=172.100.100.174, rootpath=
PHY: 0:02 - Link is Up - 100/Full
scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
usb-storage: device scan complete
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
Empty flash at 0x03556bdc ends at 0x03557000
VFS: Mounted root (jffs2 filesystem) on device 31:6.
devtmpfs: mounted
Freeing unused kernel memory: 116k freed
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode
stmcore-display: using HDMI hotplug
stmcore-display: STi7111 display probed
device probe found 2 display pipelines
requesting frm: 'component.fw', c117c320/87e6d590
stm-awg: firmware: requesting component.fw
frm 'component.fw' successfully loaded
requesting frm: 'fdvo0.fw', c117c320/875b6650
stm-awg: firmware: requesting fdvo0.fw
loading frm: 'fdvo0.fw' failed: -2
[CEC] init - starting
[CEC] The above error is a wanted behaviour as this was a ping!
Fulan front panel driver
VfdType = 2
CpuType = 2
DisplayInfo = 4
scankeyNum = 8
swMajorVersion = 1
swSubVersion = 9
stby key 0 = 9966da25
stby key 1 = 11eeda25
stby key 2 = 1ce37887
stby key 3 = c43b7887
stby key 4 = dd227887
blue key 0 = 996640bf
blue key 1 = 11ee40bf
blue key 2 = 1ce352ad
blue key 3 = c43b52ad
blue key 4 = dd2228d7
input: fulan front panel buttons as /devices/virtual/input/input0
aotom-rtc aotom-rtc: rtc core: registered aotom as rtc0
aotom_rtc_probe 8755a200
aotom_rtc_probe 2
stmfb: fb0 parameters = "1280x720-32@50:15mal:yuv:yuv"
stmfb: Starting HDMI Output hdmi = 87600000
stmfb: fb1 parameters = "<NULL>"
Init of MME log wrapper
stm_v4l2_register_driver: driver 'stmvout' registered
stm_v4l2_register_driver: driver 'stmvbi' registered
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pseudocard: 1 pseudo soundcard(s) found
stv090x loaded
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 4096, waitMS = 20, enableStatistic = 0)
no swts ->routing streams from dvr0 direct to the player
DVB: registering new adapter (STM Streamer)
0: DeviceContext 87cc6088, DvbDemux 87cc64c4, DmxDevice 87cc66ac
CaInit()
Initializing CI Controller
ptiInit context = 87cc6088, demux = 87cc64c4
[Spark] Init Stream Routing...
Load real TC Code
TC_Data = fe238000, TC_Code = fe23c000
Readback TC ... successfull
using videoMem = 770048 (packets = 4096)
pti: pti_buffer_pool_init: allocate 188 pages (770048 bytes)
DMA(0) base = 49380000, top = 4943c000, buffer = 49380000, size 770048
freeBuffer(): free = 1
stv090x_register_frontend: stv090x DVB: 0.11
pti_task: using 1 dma channel
tuner = 1
stv090x_register_frontend: init tuner 0
> (bus = 3) init_stv090x_device
i2c adapter = 0x87e3d418
i2c addr = 68
tuner enable = 0.0
frontend_init >
[stv090x_attach]i2c adapter = 87e3d418
i2c addr=104
ix7306_write ucIOBuffer 4 Err = 0
ix7306_write ucIOBuffer 1 Err = 0
ix7306_write ucIOBuffer Err 2 = 0
ix7306_read Err = 0 ucData = 0x18
========tuner_sharp7306_identify =====
tuner_Sharp7306 is Identified
frontend_init: attached
ix7306_attach: Attaching Sharp BS2S7HZ7306A IX7306 8PSK/QPSK tuner
frontend_init: IX7306 attached
init_stv090x_device: Call dvb_register_frontend (adapter = 0x87cc603c)
DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
stv090x_register_frontend: <
Free session: 0
Using session 0
Descrambler Handler = 40000
install_e2_procs(): entry already in use 'stb/fp/was_timer_wakeup'
1: DeviceContext 87cc6748, DvbDemux 87cc6b84, DmxDevice 87cc6d6c
CaInit()
ptiInit context = 87cc6748, demux = 87cc6b84
Free session: 1
Using session 1
Descrambler Handler = 41000
2: DeviceContext 87cc6e08, DvbDemux 87cc7244, DmxDevice 87cc742c
CaInit()
ptiInit context = 87cc6e08, demux = 87cc7244
convert_source(): invalid frontend source (2)
Free session: 2
Using session 2
Descrambler Handler = 42000
3: DeviceContext 87cc74c8, DvbDemux 87cc7904, DmxDevice 87cc7aec
ptiInit context = 87cc74c8, demux = 87cc7904
convert_source(): invalid frontend source (3)
Free session: 3
Using session 3
Descrambler Handler = 43000
stm_v4l2_register_driver: driver 'Linux DVB Overlay' registered
OSDEV_LinkDevice - /dev/allocator, Major 245, Minor 0
AllocatorLoadModule : Allocator device loaded
OSDEV_LinkDevice - /dev/h264pp, Major 246, Minor 0
H264ppLoadModule : H264pp device loaded
(bpamem_init): BPAMem driver register result = 0
Registering device 'sc', major '169'
Version of smartcard driver: [1.0.1]
ramzswap: disk size not provided. You can use disksize_kb module param to specif
y size.
Using default: (25% of RAM).
ramzswap: disk size set to 23188 kB
ramzswap: Initialization done!
Adding 23184k swap on /dev/ramzswap0. Priority:-1 extents:1 across:23184k SS
LinuxDvbvbPlaybackCreate: Playback 86a6e3e0
input: remote control as /devices/virtual/input/input1
LinuxDvbvbPlaybackDelete: Playback 86a6e3e0, Usage = 0
LinuxDvbvbPlaybackCreate: Playback 86912de0
stmhdmiio_get_cec_address - 87600000
proc_tsmux_input0_write 1 A
proc_tsmux_input1_write 1 B
msg.addr = 96
config->addr = 96
ix7306_write: write error, err=-121
nim_vz7306_control: I2C write error init_data1
failed to get output window -22
failed to set output window -22
failed to get output window -22
failed to set output window -22
failed to get output window -22
failed to set output window -22
failed to get output window -22
failed to set output window -22
proc_denc_0_wss_write 4 - auto
proc_hdmi_edid_handling_read
stmhdmiio_get_edid_handling - 87600000
proc_hdmi_edid_handling_read - 1
proc_hdmi_edid_handling_read
stmhdmiio_get_edid_handling - 87600000
proc_hdmi_edid_handling_read - 1
proc_hdmi_edid_handling_read
stmhdmiio_get_edid_handling - 87600000
proc_hdmi_edid_handling_read - 1
proc_hdmi_edid_handling_write 8 - [HDMI] EDID handling arg: 00000001
[HDMI] EDID handling: none strict
stmhdmiio_set_edid_handling - 87600000
proc_hdmi_audio_source_read
stmhdmiio_get_audio_source - 87600000
proc_hdmi_audio_source_read - 0
proc_hdmi_audio_source_read
stmhdmiio_get_audio_source - 87600000
proc_hdmi_audio_source_read - 0
proc_hdmi_audio_source_read
stmhdmiio_get_audio_source - 87600000
proc_hdmi_audio_source_read - 0
proc_hdmi_audio_source_write 3 - pcm
stmhdmiio_set_audio_source - 87600000
Found mode to set 720p50 at 21
Found mode to set 720p50 at 21
Found mode to set 720p50 at 21
ERROR:LinuxDvbvbDisplayDelete: Failed to close audio surface
ERROR:LinuxDvbvbDisplayDelete: Failed to close audio surface
LinuxDvbvbPlaybackDelete: Playback 86912de0, Usage = 0
aotom_write_rtc_offset 4 - aotom_write_rtc_offset -> 7200
offset: 7200
aotom_write_rtc 13 - aotom_write_rtc -> 1411460961.51
msg.addr = 96
config->addr = 96
ix7306_write: write error, err=-121
nim_vz7306_control: I2C write error init_data1
pti_hal_set_source(): 0, 34
ATR wasn't read
reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
[Spark] reinit stream routing...
getBuffer(): free = 1
pti_buffer_get(770048) => 87ffe980
LinuxDvbvbPlaybackCreate: Playback 869122e0
(da 0, 1)Find spdif_bypass control at 875bb580
(da 0, 2)
ksound: Set parameters for hw:0,2 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,1 to 2 x 48000hz with period 1536 (of 4608)
ksound: Set parameters for hw:0,0 to 2 x 48000hz with period 1536 (of 4608)
sound/stm/conv_i2sspdif.c:204: WARNING! Failed to set channel status registers f
or converter snd_conv_i2sspdif.0! (tried 6 times)
sound/stm/conv_i2sspdif.c:290: WARNING! Can't set channel status registers!
(da 0, 3)(da 0, 3)aotom_write_rtc 10 - aotom_write_rtc -> 1411460965
sound/stm/conv_i2sspdif.c:204: WARNING! Failed to set channel status registers f
or converter snd_conv_i2sspdif.0! (tried 6 times)
sound/stm/conv_i2sspdif.c:290: WARNING! Can't set channel status registers!
Found mode to set 720p50 at 21
Found mode to set 720p50 at 21
Found mode to set 720p50 at 21
proc_denc_0_wss_write 4 - auto
sound/stm/conv_i2sspdif.c:204: WARNING! Failed to set channel status registers f
or converter snd_conv_i2sspdif.0! (tried 6 times)
sound/stm/conv_i2sspdif.c:290: WARNING! Can't set channel status registers!
sound/stm/conv_i2sspdif.c:204: WARNING! Failed to set channel status registers f
or converter snd_conv_i2sspdif.0! (tried 6 times)
sound/stm/conv_i2sspdif.c:290: WARNING! Can't set channel status registers!
sound/stm/conv_i2sspdif.c:204: WARNING! Failed to set channel status registers f
or converter snd_conv_i2sspdif.0! (tried 6 times)
sound/stm/conv_i2sspdif.c:290: WARNING! Can't set channel status registers!
sound/stm/conv_i2sspdif.c:204: WARNING! Failed to set channel status registers f
or converter snd_conv_i2sspdif.0! (tried 6 times)
sound/stm/conv_i2sspdif.c:290: WARNING! Can't set channel status registers!
sound/stm/conv_i2sspdif.c:204: WARNING! Failed to set channel status registers f
or converter snd_conv_i2sspdif.0! (tried 6 times)
sound/stm/conv_i2sspdif.c:290: WARNING! Can't set channel status registers!
aotom_write_rtc_offset 4 - aotom_write_rtc_offset -> 7200
offset: 7200
aotom_write_rtc 13 - aotom_write_rtc -> 1411462761.57
root@arguspingulux:~#

Vielleicht siehst da ja was, was für den VIP verwendbar ist.
Oder sag was ich noch liefern soll.

 

[Ducktrick]

AW: Kriege V14 im internen Slot nicht zum Laufen

das ist schwer zu sagen woran es liegt da ich selber keine besitze, intern würde ich sagen das der treiber den clock nicht packt, warum das aber extern nicht geht ist verwunderlich ...
Aber die Jungs vom Pingu sollten mal ihren Tuner Treiber Fixen der macht nen haufen i2c write error

 

[Pilot]

AW: Kriege V14 im internen Slot nicht zum Laufen

Aber die Jungs vom Pingu sollten mal ihren Tuner Treiber Fixen der macht nen haufen i2c write error

Denke, das sie es gemacht haben.
Hab gerade online jede Menge updates durchgeführt