Laber Thema zu Neutrino-martiiGit-by-FFTeam-für Pingulus und Plus,GM990,Sab,Amiko

# CCcam team uvadi CCcam v2.3.0#
# Special greets go to all our friends all over the world, you know who you are!
#
# Specjalne podziekowania dla Ludzi z Polski, dzieki ktorym jest duzo nowych funkcji w wersji 2.0.0
# Ostatnim razem zapomnielismy o nich wspomniec w readme. DZieki Chlopaki!
#


######################################################################
# friends #
######################################################################
# syntax for to add a friend user to CCcam with the max up hops limit (default = 5)
# sharing of emus (default = 1), allow emm (default = 1), and optional
# downshare limits per share (default = no limits) and optional
# downshare limits per share based on caid:id:sid
# and optional timeslots in which share is valid (to block channels on box of children after 19:00 for instance)
# if no timeslot is defined 24 hrs a day is used
# emus are shared only one level down, even if no limits given
#
# max username length 20
# password length 'unlimited'
#
#F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:iddownhops), caid:iddownhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address
#
# example:
#
# F: user1 pass1
#
# user1 gets all our shares at max 5 hops from us
# (our local cards + max five hops away). He can share down to his own
# clients. He also receive emu shares (if he has 'yes' behind his C: entry),
# and is allowed to send us emm.
#
# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# user2 gets only our local cards but no 0100:000080.
# and our 0622:000000 cards only for himself (1 hop down),
# and 0500 cards for himself plus one additional hop down.
# He also gets our emus, and is NOT allowed to send us emm (updates).
#
# F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
#
# user3 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
#
# F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# But he is not allowed to share 0100:000080 down to other users.
# He gets no emus from us, and he is allowed to send us emm.
# He is also not allowed to view channel 0100:000080:15df
#
# F: user4 pass4 5 0 1 { } { } { 12:00-17:00, 19:00-20:00 }
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00
# outside these hours the share will not give cw's to the client
#
#
# F: user5 pass5 5 1 1 { } { } { } 192.168.1.1
#
# user5 gets all cards at a maximum of 5 hops away from us
# user5 is only allowed to connect from the host 192.168.1.1
#
#F: hw 98456321 0 0 0 { 0:0:1 }


######################################################################
# connections #
######################################################################
# syntax for to add a client connection to other CCcam
# add yes on end to use friends emus (non public private key/emu,etc...),
# but only works when corresponding F line on server has '1' for <shareemus>
# optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)
#
#C: <hostname> <port> <username> <password> <wantemus> ( { caid:iduphops), caid:iduphops), ... } )
#
#note: if {} limits are added, <wantemus> cannot be omitted. Use either yes or no.
#
# example:
#
# C: someserver.somedomain 12000 user1 pass1
# C: 192.168.1.2 12000 user2 pass2
# connects to CCcam without use of friends emus
#
# C: 192.168.1.2 12000 user3 pass3 yes
# connects to CCcam, and receives friends emus also.
C: xxxxxx.org 12000 xxxxxx xxxxxx no


# syntax for to add newcamd server connection
#
#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
#
# example:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# add a newcamd card, give it an offset of 2 hops, in the share list
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
#
# stealthy login on newcamd server:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
#
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic




# syntax for to add radegast server connection
#
#R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# R: 127.0.0.1 678 0100 000080




# syntax for to add camd3 connection
#
#L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
# L: 127.0.0.1 567 dummy dummy 0100 000080




# syntax for add gbox connection
#
#G: <pass> <localhost> <localport> <peerpass> <peeraddress> <peerport>
#
# support optional limits just like C line (ignore shares more than 'uphops' away)
# { caid:iduphops), caid:iduphops), ... }
#
# example:
#
# G: AABBCCDD my.address.tv 2500 12345678 peer.address.tv 2500


######################################################################
# Other config settings #
######################################################################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s or set port 0
#
SERVER LISTEN PORT : 12345


# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
#ALLOW TELNETINFO: no
#ALLOW WEBINFO: no


# Show extended client info when showing client list
# default is yes
#
#SHOW EXTENEDED CLIENT INFO : no


# The webinfo service can be protected with a username and password.
# This is switched off by default
#
#WEBINFO USERNAME : <username>
#WEBINFO PASSWORD : <password>


# The telnetinfo service can be protected with a username and password.
# This is switched off by default
#
#TELNETINFO USERNAME : <username>
#TELNETINFO PASSWORD : <password>


# default port for telnet is 16000
# default port for web is 16001
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use:
# echo servers | telnet localhost 16000
# go with your browser to
#
#TELNETINFO LISTEN PORT : 16000
#WEBINFO LISTEN PORT : 16001


# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
#ZAP OSD TIME : 3


# username used to show popup (default : root)
#OSD USERNAME : root


# password used to show popup (default : dreambox)
#OSD PASSWORD : dreambox


# port used to show popup (default : 80)
#OSD PORT : 80


# Serial reader config. Add as many as you have attached too your system
# replaces old name 'PHOENIX READER PATH', but still works.
# default is none
# optionally add readertype : phoenix,mouse,uniprog,sc8in1,smartreader+
# (when non readertype given defaults to uniprog (e.g. for mastera))
#
# SERIAL READER : <device> <type>
#
# example
#
#SERIAL READER : /dev/tts/0


# Serial reader smartcard write delay.
# Setting to finetune smartcard write speed, optimal setting depends on speed of system, and
# speed of card. Default value is calculated, but can overrule by setting.
# Use number of microseconds delay between bytes, 0 = no delay, -1 = calculated default
# Note: huge difference between values 0 and 1, because of schedular overhead
#
# SMARTCARD WRITE DELAY : <device> <delay>
#
# example, 10ms write delay on smartcard in reader attached to /dev/ttyUSB0
#
#SMARTCARD WRITE DELAY: /dev/ttyUSB0 10000
#
# NOTE on sc8in1; because 8 smartcards are used on the same devicename, use
# devicename_0 .. devicename_7 for settings which require devicename to make
# settings per smartcard. example /dev/ttyS0_0, /dev/ttyS0_1 ..
# example, 8ms write delay between bytes to smartcard on last sc8in1 channel, attached to /dev/tts/0
#
#SMARTCARD WRITE DELAY: /dev/tts/0_7 8000


# Smartcard clock speed override
# Setting override specified speed for smartcard.
# Don't add setting unless you're sure what you're doing.
# In 99% of the cases the reader selects the optimal speed.
# Adding this setting either slows your card down, or might destroy it.
#
# SMARTCARD CLOCK FREQUENCY : <device> <freq>
#
# example
#
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 5500000


# if timing should be shown in OSD and debug output
# default is no (turned off)
#
#SHOW TIMING : yes


# enables mini OSD which shows server(type), cardreader, keys or fta only
# default is no (turned off)
#
#MINI OSD : yes


# turns debugging on and off
# default is no (turned off)
#
#DEBUG : yes




# should CCcam try to read and parse newcamd.conf for server connections
# default is no (turned off)
#
#NEWCAMD CONF : yes




# configure what EMM blocker you want. Add as many as readers you have attached
# default is blocking nothing
#
# B: /dev/sci0 01
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# and sum of for combinations
#
#examples
#
#B: /dev/tts/0 07
#B: /dev/sci0 01


# disable all EMM readers (clientside setting)
# saves lots of CPU, but you won't get any updates anymore
# (unless you get updates from your clients)
#
# default: no
#
#DISABLE EMM : yes


# control how to deal with global (ga) EMM readers (clientside setting)
# can avoid global (possibly noisy) emm being sent over the network
# shared and unique emm is not affected by this setting
# to block all emm, use DISABLE EMM setting instead
#
# 0 = ignore all global emm
# 1 = accept a small amount of global emm
# 2 = accept all global emm
#
# default: 2 (handle all global emm)
#
# example: seriously reduce the global emm traffic, but allow limited
# global emm when a smartcard does not work (possibly because it needs an update)
#
#GLOBAL EMM : 1


# with this setting you can
# allow a client on two hops away
# to send the updates to the cardserver
#
# default : no
#
#EXTRA EMM LEVEL : yes


# with this setting you can
# configure how many emm listeners are started.
# for example use 2 when recording
# and viewing different systems and both need constant updates
#
# default : 1
#
#EMM THREADS : 1


# overrule the nds boxkey (4 byte hex)
#
# BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>
#
#example
#
#BOXKEY: /dev/sci0 00 11 22 33


# set card pin
# * please be very careful with this option as you could lock your card *
#
# PIN: <device> <pin>
#
#example
#
#PIN: /dev/sci0 1234


# overrule the irdeto camkey (8 byte hex), default 11 22 33 44 55 66 77 88
#
# CAMKEY: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> <byte7> <byte8>
#
#example
#
#CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88


# overrule the irdeto camdata (64 byte hex)
# trailing zero bytes can be omitted
# default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults
#
# CAMDATA: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> ... <byte64>
#
#example, when only the first 15 camdata bytes are nonzero
#
#CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff


# custom add id's for BEEF patched cards
#
# BEEF ID: <ident1> <ident2> <ident3> <ident4> <ident5> <ident6> <ident7> <ident8> <device>
#
#example
#
#BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0


# what Softcam.Key should CCcam try to read
# defaults to /var/keys/SoftCam.Key
#
#SOFTKEY FILE : /var/keys/SoftCam.Key




# what AutoRoll.Key should CCcam try to read
# defaults to /var/keys/AutoRoll.Key
#
#AUTOROLL FILE : /var/keys/AutoRoll.Key




# what constant.cw should CCcam try to read
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4mtpid4:ecmpid4:key16(01 02 03...)
#
#STATIC CW FILE : /var/keys/constant.cw




# in this file you can configure what CAIDs CCcam should prefer or ignore
# defaults to /var/etc/CCcam.prio
# file content can have ignores (I) and prio lists (P)
#
# note 1: I line affects both for ecm and emm (receive no emm on ignored systems)
# P line only affects ecm choice (emm still received for all available systems, not just the priority system)
#
# note 2: ident 0 means 'all idents'. So 'caid:0' is the same as 'caid'.
#
# note 3: for some systems (e.g. nagra (caid 18xx)), the ident is not known at the time the
# prio lists are checked. In that case, matching is done on caid only, even if the P line
# defines nonzero idents. So for example '1801:401' behaves the same as '1801' in a P line
# I lines work differently, they are checked two times, once before ecm or emm is received, again
# after ecm or emm are received (and nagra ident should be known)
# P lines are only checked once, before ecm received.
#
# note 4: if a P line contains caid:ident pairs which are not available for the current
# channel, that P line is not used for that channel.
# Example, channel has systems 626, 1801:401 then P line with "1801,100:96,626" is ignored by that channel,
# because channel doesn't have 100:96.
# But P line with "1801" works, and also "626,1801" will work for channel
#
# note 5: P lines are parsed in the order in which they are found in the prio file.
# Only the first matching P line is used
#
# situation 1: ignore allways this caid, all idents, on all channels
# I: caid
#
# situation 2: ignore allways this caid/ident pair
# I: caid:ident
#
# situation 3: ignore this caid/ident pair, on channel 'sid'
# I: caid:ident:sid
#
# situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2
# P: caid1, caid2
#
# situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.
# P: caid1:ident1, caid2:ident2, .., caidN:identN
#
# situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
# Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
# P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
#
#CAID PRIO FILE : /var/etc/CCcam.prio


#
# In this file all provider idents are defined
# The info from this file is being used in the web interface
# format:
# <caid><ident> "Provider description"
#
# PROVIDERINFO FILE : /var/etc/CCcam.providers


#
# In this file all channel idents are defined
# The info from this file is being used in the web interface
# format:
# caid:ident:sid "Channel description"
#
# CHANNELINFO FILE : /var/etc/CCcam.channelinfo


# write wrong logins to file
# defaults is off
#
#LOG WARNINGS : /tmp/warnings.txt


# global setting for stealthy login to newcamd/newcs server, N line can overrule
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
# default: 0
#
#NEWCAMD STEALTH : 0


# load balancing between identical cards, list device names of card readers containing identical cards,
# optionally followed by a list of service id's which are to be excluded from loadbalancing
#
# LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }
#
# multiple loadbalance groups can be configured, by adding multiple lines
# warning: restart is required, when loadbalance group config changes
#
#example 1: load balance requests for three identical cards
#
# LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2
#
#example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available
#on one of the cards, so requests for these sids shouldn't be loadbalanced
#
# LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }


# in version 1.2.1 and lower there was a problem which could lead to disconnecting clients
# in version 1.4.0 network load was significantly reduced
# in version 1.7.0 dangerous password bug was fixed
# in order to take advantage of these fixes, all clients should upgrade
# with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
#
# default : accept all versions
#
#example 1: avoid disconnecting clients problem
#
#MINIMUM CLIENT VERSION : 1.3.0
#
#example 2: achieve network load decrease
#
#MINIMUM CLIENT VERSION : 2.2.0
#
#example 3: don't allow potentially wrong passwords (pre 1.7.0 has password bug)
#
#MINIMUM CLIENT VERSION : 1.7.0




# Irdeto smartcards: option to disable smart chid checking for irdeto smartcards.
# Default, only chids advertised by card are accepted.
# This avoids a lot of unwanted card traffic
#
# But if smartcard has hidden/unknown chids, all chids should be tried.
# In that case specify 'TRY ALL CHIDS' option for cardreader.
# Use with care, enabling option causes more card traffic.
# Only use setting when some channels in your subscription don't work without it.
# note: if even this setting don't help decode all channels, try using
# commandline arg -l, to disable all self-learning features (warning: slower)
#
#TRY ALL CHIDS : <device>
#
#example: card in /dev/ttyUSB0 gets ecm for all possible chids, not
#just the chids it officially supports
#
#TRY ALL CHIDS : /dev/ttyUSB0


# perform smartcard post init commands
#
# POSTINIT : <device> <filename> (<autodelete>)
#
# send commands in 'filename' to 'device', and delete 'filename' when
# optional 'autodelete' argument nonzero
#
#example:
#
#POSTINIT : /dev/sci0 /tmp/postinit
#
#example /tmp/postinit contents:
#c134000003000000
#c13201000a


# Option to override autodetected dvb api version. Restart needed.
#
#DVB API: <value>
#
# <value> -1 = no dvb, 1 = dvb api 1, 3 = dvb api 3
#
# WARNING: only use when autodetect fails!
#
#example, disable nonworking dvb hardware:
#DVB API: -1


# Option to set global share limits
#
#GLOBAL LIMITS: { caid:iddownhops), caid:iddownhops), ... }
#
#example:
#
#GLOBAL LIMITS : { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# all users get no 0100:000080.
# and our 0622:000000 cards only for themself (1 hop down),
# and 0500 cards for themself plus one additional hop down.
# global limits are overridden by client specific limits (see F


# Option to reject shares with less than required downhops on clientside
#
#MINIMUM DOWNHOPS: <value>
#
# default: 0 (don't ignore any shares)
#
#example:
#
#MINIMUM DOWNHOPS: 1
#
# ignore shares that have less than 1 'downhops' (i.e. can not be shared
# further down to other clients)


# Option to ignore all shares that go through a certain node
#
#IGNORE NODE: <nodeid>
#
#example, ignore two nodes:
#
#IGNORE NODE: ccd536ab515767ad
#IGNORE NODE: aad536ab515761af




# The seca handler is used to better support simulcrypt on the same ident
#
# With this setting you can change the behaviour of how SECA has to be used
# This setting is ignored unless SECA2/SECA3 simulcrypt is detected!!
#
# When disabled CCcam behaves like previous versions
#
# When "prefer SECA3 over SECA2" is enabled try to use SECA3 ecm first, then SECA2
#
# When "Ignore SECA2" is enabled, ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle
#
# When "Ignore SECA3" is enabled, ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle
#
#
# The following settings can be used
#
# SECA HANDLER: <value>
# <value> : 0 = disabled, 1 = prefer SECA3 over SECA2, 2 = prefer SECA2 over SECA3, 3 = Ignore SECA2, 4 = Ignore SECA3
#
# default: 1
#
# Example try to use SECA3 ecm first, then SECA2
#SECA HANDLER: 1
#
# Example try to use SECA2 ecm first, then SECA3
#SECA HANDLER: 2
#
# Example to ignore all SECA2 ecm so a SECA3 card will not get SECA2 request which it cannot handle
#SECA HANDLER: 3
#
# Example to ignore all SECA3 ecm so a SECA2 card will not get SECA3 request which it cannot handle
#SECA HANDLER: 4




# Configure limited list of accepted sids for smartcard
# When omitted, all sids are allowed.
# Can work together with LOADBALANCE configuration (sids which are not allowed will be automatically left out of the loadbalance)
#
# SMARTCARD SID ASSIGN : <device> <maxnumberofsids> { <sid1>, <sid2>, ... <sidn> }
#
# <device> is the reader devicenode
# <maxnumberofsids> limits the total number of sids assigned to the card (0 = use length of sid list)
# { <sid1>..<sidn> } lists the sids that are assigned to the smartcard, when omitted, <maxnumberofsids> is used to auto assign sids
#
# when <maxnumberofsids> is larger than the length of the sidlist, the remainder of the sids are auto assigned, till the list reaches <maxnumberofsids>
# Check entitlement output for realtime assignment list
#
# WARNING: when SMARTCARD SID ASSIGN config changes, restart is required before settings take effect
#
#example1: smartcard in device /dev/ttyUSB0 only handles requests for sids df3, df4, df5
#
#SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0df3,0df4,0df5 }
#
#example2: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, auto assigned in the order of occurance. A request for a 6th sid will be denied.
#
#SMARTCARD SID ASSIGN : /dev/ttyUSB0 5
#
#example3: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, 3 of which are df3, df4, df5, remaining 2 are auto assigned
#
#SMARTCARD SID ASSIGN : /dev/ttyUSB0 5 { 0df3,0df4,0df5 }




# Configure list of sids which are not to be handled by smartcard
# When omitted, all sids are allowed (or SMARTCARD SID ASSIGN list is allowed, if available)
# Don't use together with (fixed) SMARTCARD SID ASSIGN list; use one or the other, depending on which gives the shortest list
# Can work together with dynamic SMARTCARD SID ASSIGN list.
# Can work together with LOADBALANCE configuration (sids which are rejected will be automatically left out of the loadbalance)
#
#SMARTCARD SID REJECT: <device> { <sid1>, <sid2>, ... <sidn> }
#
# <device> is the reader devicenode
# { <sid1>..<sidn> } lists the sids that are to be rejected on the smartcard
#
#
#example1: smartcard in device /dev/ttyUSB0 should not handle requests for sids df3, df4, df5
#
#SMARTCARD SID REJECT: /dev/ttyUSB0 { 0df3,0df4,0df5 }


# Option to limit the number of sids active on a single smartcard within a given time period
#
# SID LIMIT: <device> <maxsids> <timelimit>
#
# example: handle max 4 different sids every 11 seconds
#
# SID LIMIT: /dev/sci0 4 11


# Option to overrule the number of sci devices to be opened
#
#SCIDEVICES: <number>
#
#example, don't open any sci devices
#
#SCIDEVICES: 0
#
#example, force 2 devices to be opened
#
#SCIDEVICES: 2
#
# When omitted, attempt to open an autodetected number of sci devices
# WARNING: restart is required before a new SCIDEVICES limit takes effect
# *Merry Christmas* from aff-board.com

[TABLE="class: y_form, width: 100%"]
[TR]
[TD="class: y_form_header, colspan: 2"]Speicher[/TD]
[/TR]
[TR]
[TD]total:[/TD]
[TD]66112[/TD]
[/TR]
[TR]
[TD]used:[/TD]
[TD]26088[/TD]
[/TR]
[TR]
[TD]free:[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD]swap:[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD="class: y_form_header, colspan: 2"]Hardware[/TD]
[/TR]
[TR]
[TD]avia chip:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]AV chip:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]i2c:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]CPU:[/TD]
[TD]0[/TD]
[/TR]
[TR]
[TD]CPU Clock:[/TD]
[TD]:[/TD]
[/TR]
[TR]
[TD]bongomips:[/TD]
[TD]cpu[/TD]
[/TR]
[TR]
[TD]Box:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Hersteller:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Framebuffer:[/TD]
[TD]0 STi7111-main[/TD]
[/TR]
[TR]
[TD="class: y_form_header, colspan: 2"]OS & Software[/TD]
[/TR]
[TR]
[TD]OS:[/TD]
[TD]Linux[/TD]
[/TR]
[TR]
[TD]Kernel:[/TD]
[TD]2.6.32.61_stm24_0217[/TD]
[/TR]
[TR]
[TD]Kernel Date:[/TD]
[TD]#1 PREEMPT Wed Apr 1 03:13:12 CEST 2015[/TD]
[/TR]
[TR]
[TD]Architecture:[/TD]
[TD]sh4[/TD]
[/TR]
[TR]
[TD]Busybox Version:[/TD]
[TD]BusyBox v1.23.2 (spark) multi-call binary.[/TD]
[/TR]
[TR]
[TD]Busybox Commands:[/TD]
[TD][, [[, ar, arp, arping, ash, awk, base64, basename, bbconfig, blkid, blockdev, bunzip2, bzcat, bzip2, cat, chgrp, chmod, chown, chroot, clear, cmp, cp, crond, crontab, cryptpw, cttyhack, cut, date, dd, depmod, df, diff, dirname, dmesg, dnsdomainname, dos2unix, du, echo, egrep, eject, env, ether-wake, expr, false, fatattr, fdisk, fgrep, find, flash_eraseall, flash_lock, flash_unlock, flashcp, free, fstrim, ftpd, fuser, getopt, getty, grep, groups, gunzip, gzip, halt, hd, hdparm, head, hexdump, hostname, hwclock, id, ifconfig, ifdown, ifplugd, ifup, inetd, init, insmod, iostat, ip, ipcrm, ipcs, kill, killall, klogd, less, ln, logger, login, logread, losetup, ls, lsmod, lsof, lsusb, makedevs, md5sum, mdev, microcom, mkdir, mkfifo, mknod, mkpasswd, mkswap, mktemp, modinfo, modprobe, more, mount, mountpoint, mpstat, mv, nanddump, nc, netstat, nice, nohup, nslookup, ntpd, passwd, pgrep, pidof, ping, pivot_root, pmap, poweroff, powertop, printenv, printf, pstree, pwd, pwdx, rdate, readlink, readprofile, reboot, renice, reset, rm, rmdir, rmmod, route, sed, sendmail, seq, setconsole, setlogcons, sh, sha1sum, sha256sum, sha3sum, sha512sum, shuf, sleep, smemcap, sort, start-stop-daemon, stat, strings, stty, su, swapoff, swapon, sync, syslogd, tail, tar, tee, telnet, telnetd, test, time, timeout, touch, tr, traceroute, true, udhcpc, umount, uname, uniq, unix2dos, unlink, unzip, uptime, usleep, vi, watch, watchdog, wc, wget, which, xargs, yes, zcat[/TD]
[/TR]
[TR]
[TD="class: y_form_header, colspan: 2"]Filesystem & Modules[/TD]
[/TR]
[TR]
[TD]Mounts:[/TD]
[TD]rootfs / rootfs rw 0 0
/dev/root / jffs2 rw,relatime 0 0
proc /proc proc rw,relatime 0 0
dev /dev tmpfs rw,relatime 0 0
usbfs /proc/bus/usb usbfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
tmp /tmp tmpfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
nfsd /proc/fs/nfsd nfsd rw,relatime 0 0
djmount /tmp/media/upnp fuse.djmount ro,nosuid,nodev,relatime,user_id=0,group_id=0 0 0[/TD]
[/TR]
[TR]
[TD]mtd:[/TD]
[TD]dev: size erasesize name
mtd0: 00080000 00010000 "Boot firmware"
mtd1: 00700000 00010000 "Kernel"
mtd2: 00080000 00010000 "Reserve"
mtd3: 00800000 00020000 "Spark Kernel"
mtd4: 17800000 00020000 "Spark Rootfs"
mtd5: 00800000 00020000 "kernel"
mtd6: 07700000 00020000 "rootfs"[/TD]
[/TR]
[TR]
[TD]filesystems:[/TD]
[TD]sysfs, rootfs, bdev, proc, tmpfs, sockfs, usbfs, pipefs, anon_inodefs, rpc_pipefs, devpts, ext3, ext2, ext4, ramfs, vfat, msdos, iso9660, nfs, nfsd, cifs, jffs2, fuse, fuseblk, fusectl, udf, jfs[/TD]
[/TR]
[TR]
[TD]modules & dependencies:[/TD]
[TD]smartcard 28231 0 - Live 0xc199c000
bpamem 3213 2 - Live 0xc198a000
silencegen 1095 0 - Live 0xc1980000
platform 721 0 [permanent], Live 0xc1976000
stmalloc 2548 0 - Live 0xc196d000
sth264pp 5827 0 - Live 0xc1965000
player2 681540 2 stmalloc,sth264pp, Live 0xc1871000
stmdvb 116476 9 player2, Live 0xc15cd000
stmsysfs 42415 0 - Live 0xc1599000
stm_monitor 8614 1 player2, Live 0xc158b000
pti 1863649 1 stmdvb, Live 0xc13b8000 (P)
stv090x 68317 1 stmdvb, Live 0xc1394000
pseudocard 14650 5 player2,stmdvb, Live 0xc1370000
stmvbi 6030 0 - Live 0xc135f000
stmvout 170847 0 - Live 0xc132a000
stm_v4l2 8707 3 stmdvb,stmvbi,stmvout, Live 0xc1315000
p2div64 1478 3 player2,stm_monitor,stv090x, Live 0xc130a000
ksound 9196 1 player2, Live 0xc1302000
mmelog 1936 0 - Live 0xc1270000
avs 29843 1 stmdvb, Live 0xc125d000
mme_host 26917 4 silencegen,player2,stm_monitor,mmelog, Live 0xc1241000
embxshm 21621 0 - Live 0xc1227000
embxmailbox 6574 1 embxshm, Live 0xc1214000
embxshell 19628 3 mme_host,embxshm,embxmailbox, Live 0xc1202000
stmfb 42647 2 stmdvb, Live 0xc11e6000
stmcore_display_sti7111 199211 6 player2,stmdvb,pseudocard,stmvbi,stmvout, Live 0xc118a000
e2_proc 11442 2 player2,stmdvb, Live 0xc1138000
uinput 5085 1 - Live 0xc112a000
cpu_frequ 2729 0 - Live 0xc111f000
aotom 23101 2 - Live 0xc110e000[/TD]
[/TR]
[/TABLE]

C: xxxxx.org 12000 xxxxx xxxxx no

#

[account]
user = root
pwd = root
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = 1
cccignorereshare = 1
betatunnel = 1833.FFFF:1702


[account]
user = XXXXX <---- da mein username
pwd = XXXXX <---- da mein passwort
disabled = 1
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = 1
cccignorereshare = 1


[account]
user = name2
pwd = pass2
disabled = 1
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = 1
cccignorereshare = 1


[account]
user = name3
pwd = pass3
disabled = 1
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = 1
cccignorereshare = 1

# oscam.server generated automatically by Streamboard OSCAM 1.10rc-svn build #5983# Read more:


[reader]
label = cccam
description = C: xxxxxx.org 12000 user pass no
protocol = cccam
device = xxxxxxx.org,12000
user = xxxxxxx
password = xxxxx
#services = hdplus,skyfullhd
inactivitytimeout = 30
group = 1
blockemm-unknown = 1
#blockemm-s = 1
#blockemm-g = 1
#saveemm-u = 1
cccversion = 2.3.0
ccckeepalive = 1

#

[global]
disablelog = 1
logfile = stdout
clienttimeout = 7000
nice = -1
waitforcards_extra_delay = 700
readerrestartseconds = 7
usrfile = /tmp/oscamuser.log
cwlogdir = /tmp/oscam/cw


[cs357x]
port = 13000
suppresscmd08 = 1


[cs378x]
port = 13001
suppresscmd08 = 1


[newcamd]
port = 13002@0000:013002
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 1


[cccam]
port = 12000
nodeid = 04FF18E110B814F8
version = 2.3.0
reshare = 10
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000


[dvbapi]
enabled = 1
au = 1
reopenonzap = 1
user = root
boxtype = dreambox


[webif]
httpport = 8888
httprefresh = 120
httpallowed = 127.0.0.1,10.0.0.1-192.168.254.254
aulow = 120