Nach Einstellung von Services gehen manche HD+ Sender nicht mehr.

dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
#
#p: 0500:023800 # prioritize 0500 with provider 023800
#P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel
#P: 1722 # prioritize 1722
#P: 1830::EF75 # prioritize 1830 on channel EF75 only
#M: 1830 1830:003411 # map caid 1830 always to provider 003411
#D: 1702 200 # wait 200ms before writing cw on caid 1702
#I: :002000 # ignore provider 002000 on every channel
#I: 0 # ignore every caid that was not handled before
# These dvbapi settings works fine for CDS NL / BE, for other cards see oscam wiki on pli forum or oscam wiki on streamboard forum.

I: 0100 #ignore all old seca providers
I: 0500 #ignore viaccess
I: 0622 #ignore old irdeto
M: 1817:00006A 0100:00006A #map NL nagracaid 1817:00006A to seca 0100:00006A
M: 1818:00006C 0100:00006C #map BE nagracaid 1818:00006C to seca 0100:00006C
P: 1817:00006A #Prio NL 1817
P: 1818:00006C #Prio BE 1818

Zum Vergrößern anklicken....

[global]
disablelog = 1
disableuserfile = 1
#logfile = /media/usb/oscam/oscam.log
# first create the needed directory's and see if there is usb stick, cf or hdd
#usrfile = /media/usb/oscam/user.log
# first create the needed directory's and see if there is usb stick ,cf or hdd
#cwlogdir = /media/usb/oscam
# first create the needed directory's and see if there is usb stick ,cf or hdd
#emmlogdir = /media/usb/
# first create the needed directory's and see if there is usb stick ,cf or hdd
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600

[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255

[webif]
httpport = 00000
httpuser = user1234
httppwd = password
httprefresh = 20
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 0
httpreadonly = 0

[cccam]
port = XXX
version = 2.2.1
reshare = 3
reshare_mode = 4
ignorereshare = 0
minimizecards = 0
keepconnected = 1
nodeid = 0a0b0c0d0e0f1215

[dvbapi]
enabled = 1
au = 1
user = dvbapiau
boxtype = dreambox
request_mode = 1

#[newcamd]
#key = 0102030405060708091011121314
#port = 34003@0500:FFF400,042800,042810
#keepalive = 1
#allowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255

#[radegast]
#port = 30000
#user = radegastuser
#allowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255

#[camd33]
#port = 40000
#serverip = 192.168.123.1
#key = 01020304050607080910111213141516

#[cs378x]
#port = 50000@0300:600000

#[gbox]
#hostname = host.example.com
#port = 60000
#password = mypassword

Zum Vergrößern anklicken....