Quantcast
Aktuelles
Von:
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

OSCAM-Server funktioniert nicht mehr nach Umstieg von Dreambox 800 SE auf VU+ Solo²

G

GatesKiller

Ist gelegentlich hier
Registriert
4. Januar 2011
Beiträge
44
Reaktionspunkte
6
Punkte
8
Hallo zusammen,

nach vielen Jahren möchte ich von meiner Dreambox 800 SE auf eine neue VU+ Solo² umsteigen und scheinbar funktioniert die alte Konfig auf der neuen Box und ich weiß nicht, was da geändert werden muss.

Er bekommt die Karten nicht initialisiert. Im Nachfolgenden das Log und die Konfigs.

Wäre toll, wenn mir jemand von Euch helfen könnte. Vielen Dank im Voraus.


### ---


  • 2015/12/29 17:37:19 18B07C9C r (reader) V14 [internal] card detected
  • 2015/12/29 17:37:19 325BD765 r (reader) emulator [emu] card detected
  • 2015/12/29 17:37:19 644A2BEF r (reader) hd+ [internal] card detected
  • 2015/12/29 17:37:20 18B 0 7C9C r (reader) V14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2015/12/29 17:37:20 18B07C9C r (reader) V14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/12/29 17:37:20 18B07C9C r (reader) V14 [internal] Calculated work ETU is 7.11 us reader mhz = 450
  • 2015/12/29 17:37:20 325BD765 r (reader) emulator [emu] found card system emu
  • 2015/12/29 17:37:20 325BD765 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/12/29 17:37:20 325BD765 r key file not found in: /etc/tuxbox/config
  • 2015/12/29 17:37:20 325BD765 r key file not found in: /var/keys
  • 2015/12/29 17:37:20 644A2BEF r (reader) hd+ [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/12/29 17:37:20 644A2BEF r (reader) hd+ [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/12/29 17:37:20 644A2BEF r (reader) hd+ [internal] Calculated work ETU is 20.67 us reader mhz = 450
  • 2015/12/29 17:37:24 18B07C9C r (reader) V14 [internal] Buffers readed 0 bytes total time_us 4874181
  • 2015/12/29 17:37:25 644A2BEF r (reader) hd+ [internal] Buffers rea d ed 0 bytes total time_us 4796016
  • 2015/12/29 17:37:25 18B07C9C r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/12/29 17:37:25 18B07C9C r (reader) V14 [internal] Card responded ok for ifsd request of 251
  • 2015/12/29 17:37:25 644A2BEF r (reader) hd+ [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/12/29 17:37:26 18B07C9C r (reader) V14 [internal] detect native nagra card
  • 2015/12/29 17:37:26 644A2BEF r (reader) hd+ [internal] Card type: P1TV
  • 2015/12/29 17:37:26 644A2BEF r (reader) hd+ [internal] Rom version: 20AA
  • 2015/12/29 17:37:26 644A2BEF r (reader) hd+ [internal] Credit available on card: 0 euro
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] classD0 ins36: encrypted - can't parse
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] no boxID available
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] card system not supported
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/12/29 17:37:27 18B07C9C r (reader) V14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
  • 2015/12/29 17:37:27 18B07C9C r (reader) V14 [internal] card system not supported
  • 2015/12/29 17:37:27 18B07C9C r (reader) V14 [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] Calculate d work ETU is 82.67 us reader mhz = 450
  • 2015/12/29 17:37:29 18B07C9C r (reader) V14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2015/12/29 17:37:29 18B07C9C r (reader) V14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/12/29 17:37:29 18B07C9C r (reader) V14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
  • 2015/12/29 17:37:32 644A2BEF r (reader) hd+ [internal] Buffers readed 0 bytes total time_us 4895723
  • 2015/12/29 17:37:33 644A2BEF r (reader) hd+ [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/12/29 17:37:33 18B07C9C r (reader) V14 [internal] Buffers readed 0 bytes total time_us 4299385
  • 2015/12/29 17:37:34 18B07C9C r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/12/29 17:37:38 18B07C9C r (reader) V14 [internal] Warning: Card returned error on setting ifsd value to 251
  • 2015/12/29 17:37:39 18B07C9C r (reader) V14 [internal] detect native nagra card
  • 2015/12/29 17:37:43 644A2BEF r (reader) hd+ [internal] card system not supported
  • 2015/12/29 17:37:43 644A2BEF r (reader) hd+ [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/12/29 17:37:43 644A2BEF r (reader) hd+ [internal] card initializing error
  • 2015/12/29 17:37:44 18B07C9C r (reader) V14 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2015/12/29 17:37:47 18B07C9C r (reader) V14 [internal] T1 Resync command error, trying to reactivate!
  • 2015/12/29 17:37:48 18B07C9C r (reader) V14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2015/12/29 17:37:48 18B07C9C r (reader) V 14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/12/29 17:37:48 18B07C9C r (reader) V14 [internal] Calculated work ETU is 7.11 us reader mhz = 450
  • 2015/12/29 17:37:51 18B07C9C r (reader) V14 [internal] Buffers readed 0 bytes total time_us 3099911
  • 2015/12/29 17:37:52 18B07C9C r (reader) V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/12/29 17:37:52 18B07C9C r (reader) V14 [internal] Card responded ok for ifsd request of 251
  • 2015/12/29 17:37:53 18B07C9C r (reader) V14 [internal] Negotiate sessionkey was not successful! Ple a se check rsa key and boxkey
  • 2015/12/29 17:37:53 18B07C9C r (reader) V14 [internal] card system not supported
  • 2015/12/29 17:37:53 18B07C9C r (reader) V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/12/29 17:37:53 18B07C9C r (reader) V14 [internal] card initializing error


### --- EOF
Hier die relevanten Konfig-Parts:

## -- Oscam.conf
[global]
logfile = stdout
nice = -1
preferlocalcards = 1
emmlogdir = /media/hdd/var/log/

[cache]

[cccam]
port = 58247
nodeid = 29E44C9E10A514E0
version = 2.3.0
keepconnected = 1
stealth = 1

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 8081
httphelplang = deu
httprefresh = 10
httpallowed = 192.168.XX.1-192.168.XX.253 (geändert)
## -- oscam.server
root@vusolo2:/etc/tuxbox/config# cat oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11201
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = hd+
protocol = internal
device = /dev/sci1
caid = 1830,1843
boxkey = A7642F57BC96D37C
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,3,2,0

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE
 
Zuletzt bearbeitet von einem Moderator:
AW: OSCAM-Server funktioniert nicht mehr nach Umstieg von Dreambox 800 SE auf VU+ Sol

glück im unglück würde ich sagen,
  • 2015/12/29 17:37:27 644A2BEF r (reader) hd+ [internal] no boxID available
Zum Vergrößern anklicken....
du sprichst die Falschen Slots an, beim HDplus Reader kommt die Meldung nach der BoxID welche die V14 braucht

das gleiche beim V14 Reader
  • 2015/12/29 17:37:53 18B07C9C r (reader) V14 [internal] Negotiate sessionkey was not successful! Ple a se check rsa key and boxkey
Zum Vergrößern anklicken....
BOX/RSAkey Meldung
 
AW: OSCAM-Server funktioniert nicht mehr nach Umstieg von Dreambox 800 SE auf VU+ Sol

Danke, Bingo.... kleine Ursache, große Wirkung. Das war's, konnte sofort (lokal) die entsprechenden Sender schauen.

Nur bei den Clients klappt's noch nicht: "keine ECM Informationen". Werde später nochmal genauer schauen, konnte bisher eben nur die Karten tauschen und sonst nichts...
 
Werde ich nachher schauen, bin momentan unterwegs.

Moin und frohes Neues! Die Karte ist wieder expired, deshalb muss ich sie erstmal wieder ans Rennen bekommen (in der bisherigen Dreambox 800 SE).

Kann mir hier vielleicht jemand helfen; woran hakt es?

Auszug aus dem Live Log direkt nach dem Start:
  • 2016/01/01 11:57:15 76900468 h HTTP Server running. ip=0.0.0.0 port=8081
  • 2016/01/01 11:57:16 D4D568 r V14 [internal] card detected
  • 2016/01/01 11:57:16 D4F398 r hd+ [internal] card detected
  • 2016/01/01 11:57:17 D4D568 r V14 [internal] ERROR: no characters found in ATR!
  • 2016/01/01 11:57:17 D4D568 r V14 [internal] Deactivating card
  • 2016/01/01 11:57:17 D4D568 r V14 [internal] Read ATR fail, attempt 1/7 fs = 9
  • 2016/01/01 11:57:17 D4F398 r hd+ [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
  • 2016/01/01 11:57:17 D4F398 r hd+ [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2016/01/01 11:57:17 D4F398 r hd+ [internal] Calculated work ETU is 8.70 us reader mhz = 368
  • 2016/01/01 11:57:17 D4F398 r hd+ [internal] Buffers readed 0 bytes total time_us 75182
  • 2016/01/01 11:57:18 D4F398 r hd+ [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
  • 2016/01/01 11:57:18 D4F398 r hd+ [internal] Card responded ok for ifsd request of 251
  • 2016/01/01 11:57:18 D4D568 r V14 [internal] ERROR: no characters found in ATR!
  • 2016/01/01 11:57:18 D4D568 r V14 [internal] Deactivating card
  • 2016/01/01 11:57:18 D4D568 r V14 [internal] Read ATR fail, attempt 2/7 fs = 8
  • 2016/01/01 11:57:19 D4F398 r hd+ [internal] detect native nagra card
  • 2016/01/01 11:57:20 D4F398 r hd+ [internal] ready for requests
  • 2016/01/01 11:57:20 D4F398 r hd+ [internal] found card system nagra
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] ROM: D N A S P 1 4 2
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] REV: R e v G C 6
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] SER: ############
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] CAID: 1830
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] Prv.ID: 00 00 34 11 (sysid)
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] Prv.ID: 00 00 00 00
  • 2016/01/01 11:57:20 D4D568 r V14 [internal] ERROR: no characters found in ATR!
  • 2016/01/01 11:57:20 D4D568 r V14 [internal] Deactivating card
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] IRD ID: ############
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] active to: 2015/04/05 12:59
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] -----------------------------------------
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] |id |tier |valid from |valid to |
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] +----+--------+------------+------------+
  • 2016/01/01 11:57:20 D4D568 r V14 [internal] Read ATR fail, attempt 3/7 fs = 7
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] |8011|0064 |2012/10/24 |2013/10/25 |
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] |8011|0BEA |2013/10/31 |2015/12/21 |
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] -----------------------------------------
  • 2016/01/01 11:57:21 D4D568 r V14 [internal] ERROR: no characters found in ATR!
  • 2016/01/01 11:57:21 D4D568 r V14 [internal] Deactivating card
  • 2016/01/01 11:57:21 D4D568 r V14 [internal] Read ATR fail, attempt 4/7 fs = 6
  • 2016/01/01 11:57:22 D4D568 r V14 [internal] ERROR: no characters found in ATR!
  • 2016/01/01 11:57:22 D4D568 r V14 [internal] Deactivating card
  • 2016/01/01 11:57:22 D4D568 r V14 [internal] Read ATR fail, attempt 5/7 fs = 5
  • 2016/01/01 11:57:24 D4D568 r V14 [internal] ERROR: no characters found in ATR!
  • 2016/01/01 11:57:24 D4D568 r V14 [internal] Deactivating card
  • 2016/01/01 11:57:24 D4D568 r V14 [internal] Read ATR fail, attempt 6/7 fs = 4
  • 2016/01/01 11:57:25 D4D568 r V14 [internal] ERROR: no characters found in ATR!
  • 2016/01/01 11:57:25 D4D568 r V14 [internal] Deactivating card
  • 2016/01/01 11:57:25 D4D568 r V14 [internal] Read ATR fail, attempt 7/7 fs = 3
  • 2016/01/01 11:57:25 D4D568 r V14 [internal] Error activating card.
Reader Einstellungen
[reader]
label = V14
enable = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
autospeed = 1
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = hd+
enable = 1
protocol = internal
device = /dev/sci1
boxkey= A7642F57BC96D37C
rsakey= BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
caid = 1830,1843
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
 
Zuletzt bearbeitet von einem Moderator:
AW: OSCAM-Server funktioniert nicht mehr nach Umstieg von Dreambox 800 SE auf VU+ Sol

  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] active to: 2015/04/05 12:59
Zum Vergrößern anklicken....
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] |8011|0064 |2012/10/24 |2013/10/25 |
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
  • 2016/01/01 11:57:20 D4F398 r hd+ [nagra] |8011|0BEA |2013/10/31 |2015/12/21 |
Zum Vergrößern anklicken....
Das fällt bei HD+ auf.
 

Ähnliche Themen

F
Kaufberatung Brauche Hilfe bei der Receiver-Wahl
Antworten
5
Aufrufe
310
Flutsch84
F
Z
Guter Ersatz für VuPlus Solo SE mit Sky CI (VTI 15) und Fire-Stick?
Antworten
3
Aufrufe
187
Token
T
R
Kaufberatung Nachfolger VU+ Solo SE
Antworten
7
Aufrufe
2K
DVB-T2 HD
D
S
Kaufberatung Umstieg von vu+ solo 4k auf vu duo 4k se
Antworten
6
Aufrufe
2K
spliffspliff
S
M
Dreambox Two als Oscam Server, HD01 Karte, Aussetzer/Hänger bei Clients
2
Antworten
26
Aufrufe
3K
m0bbed
M
Zurück
Oben