PowerVU Softcam.Keys bereiten Probleme im Oscam

[Bnjmnb]

Hallo zusammen,

wollte ein paar Sender auf 9.0E zum laufen bekommen, habe vom Prinzip her die Files wie folgt im Softcam.Keys Menü eingepflegt:

Spoiler

P ******** 00 E******************* ;ecm key
P ******** 01 DA**************** ;ecm key
P **** 003E042A 4******************9 ;EMM Key
P ** 003E7E84 1***************** ;EMM Key
P **** 0040FB14 E8*************0 ;EMM Key
P **** 00417556 23*************7 ;EMM Key
P **** 004E0256 D3************3 ;EMM Key

Nun habe ich im Logfile stehen: impossible to descramble PID 1 CAID 0E** PROVID 000000 ECMPID 179F PMTPID 13F5 (NO MATCHING READER) <- Ich denke ich hab wohl beim Emulator was falsch angelegt?

Die Frage ist ob ich komplett auf dem Holzweg bin? Ich hab es wie folgt verstanden, Softcams einpflegen und dann über einen Emulator (also einen simulierten Cradreader?) Zum laufen bringen.


Liebe Grüße

 

[ghost0815]

Beitrag im Thema 'Wie Poste ich im OScam Bereich richtig'

27. Februar 2015

Wie poste ich richtig?


Keiner von uns kann auf deinen PC/Receiver schauen,deshalb brauchen wir ALLE Infos+Configs

Infos zur Hardware (Welcher Receiver mit welchem Image oder andere Server Hardware)

Oscam Version??

oscam.config / oscam.server / oscam.user

und falls vorhanden oscam.dvbapi / oscam.services

und auch ein oscam log vom oscam start an bis zum versuch der Entschlüsselung

diese werden in Spoilern gesetzt,für spoiler geht ihr beim Antworten rechts unten auf erweitert.markiert den Text und klickt über dem Textfeld auf spolern


z.B
oscam.config

Spoiler

inhalt der...

• cojo

• 

 

[Bnjmnb]

Entschuldigung, da war ich zu voreilig:

Reciever: VU+ Uno 4K SE mit VTI 15.0.02
Oscam: Oscam icam v9 Webinterface r11716-798

Spoiler: Oscam.Version

Unix starttime: 1745233244
Starttime: 21.04.2025 13:00:44
Version: oscam-1.20_svn-r11716-798-ICAM-v9
Compiler: arm-vuplus4k-linux-gnueabihf-ICAM_DVBAPI-V9-built_by_Alex
Box type: vuuno4kse (generic)
PID: 3614
TempDir: /tmp/.oscam
GBox tmp_dir: not defined using: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/
WebifPort: 8080

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
DVB API with ICAM streamrelay support: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no
Emulator support: yes
Built-in SoftCam.Key: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: no
constant CW: no
Pandora: no
ghttp: no

Reader support: yes

Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

Spoiler: Oscam Config

[global]
maxlogsize = 10000
logfile = /tmp/oscam.log;stdout
ecmfmt = c&p/i/s/l:h:w

[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D

[dvbapi]
enabled = 1
au = 0
user = dvbapiau
boxtype = dreambox
extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

[webif]
httpport = 8080
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = ************************************************
httposcamlabel = Oscam iCam v9 WebInterface
http_status_log = 1

Spoiler: Oscam Server

[reader]
label = emulator
protocol = emu
device = C:\Users\********************\SAT-IPTV\softcam.keys.txt <-hab hier einges rumprobiert, der Link passt aufjedenfall nicht.
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 5
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
audisabled = 1

Spoiler: Oscam User

[account]
user = dvbapiau
pwd =
disabled = 0
group = 1
au = 1
uniq = 0

Spoiler: Logfile

-------------------------------------------------------------------------------

> OSCam << cardserver log switched at Mon Apr 21 13:00:44 2025

-------------------------------------------------------------------------------
2025/04/21 13:00:44 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11716-798 (arm-vuplus4k-linux-gnueabihf-ICAM_DVBAPI-V9-built_by_Alex)
2025/04/21 13:00:44 00000000 s (main) System name = Linux
2025/04/21 13:00:44 00000000 s (main) Host name = vuuno4kse
2025/04/21 13:00:44 00000000 s (main) Release = 4.1.20-1.9
2025/04/21 13:00:44 00000000 s (main) Version = #1 SMP Fri Feb 26 14:12:01 CET 2021
2025/04/21 13:00:44 00000000 s (main) Machine = armv7l
2025/04/21 13:00:44 00000000 s (main) Stb model = dm8000
2025/04/21 13:00:44 00000000 s (main) Stb vumodel = vuuno4kse
2025/04/21 13:00:44 00000000 s (main) Stb boxtype = vuuno4kse
2025/04/21 13:00:44 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3615
2025/04/21 13:00:44 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2025/04/21 13:00:44 00000000 s (emu) OSCam-Emu version 798
2025/04/21 13:00:44 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2025/04/21 13:00:44 00000000 s (main) signal handling initialized
2025/04/21 13:00:44 00000000 s (reader) Icam [cccam] creating thread for device denizehasret.no-ip.biz
2025/04/21 13:00:44 00000000 s (reader) emulator [emu] creating thread for device C:\Users\Benjamin\Documents\SAT-IPTV\softcam.keys.txt
2025/04/21 13:00:44 00000000 s (main) waiting for local card init
2025/04/21 13:00:44 7E3110B2 r (emu) Stream key delayer initialized
2025/04/21 13:00:44 7E3110B2 r (emu) Stream relay server initialized
2025/04/21 13:00:44 7E3110B2 r (reader) emulator [emu] Reader initialized (device=C:\Users\Benjamin\Documents\SAT-IPTV\softcam.keys.txt, detect=cd, mhz=357, cardmhz=357)
2025/04/21 13:00:44 7E3110B2 r (reader) emulator [emu] card detected
2025/04/21 13:00:44 00000000 (emu) INFO: FFDecsa parallel mode = 128
2025/04/21 13:00:44 62C4762A h (webif) webif: decompressed 185169 bytes back into 485864 bytes
2025/04/21 13:00:44 62C4762A h (webif) HTTP Server running. ip=0.0.0.0 port=8080
2025/04/21 13:00:44 02AA5D3C p (reader) denizehasret.no-ip.biz: resolved ip=80.241.215.3
2025/04/21 13:00:44 02AA5D3C p (reader) Icam [cccam] connecting to denizehasret.no-ip.biz:12500
2025/04/21 13:00:44 02AA5D3C p (reader) Icam [cccam] proxy initialized, server denizehasret.no-ip.biz:12500
2025/04/21 13:00:45 7E3110B2 r (reader) emulator [emu] found card system emu
2025/04/21 13:00:45 7E3110B2 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2025/04/21 13:00:45 7E3110B2 r (emu) Reading key file: /etc/tuxbox/config/SoftCam.Key
2025/04/21 13:00:45 7E3110B2 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:33 T:0 A:0
2025/04/21 13:00:45 00000000 s (main) init for all local cards done
2025/04/21 13:00:45 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2025/04/21 13:00:45 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2025/04/21 13:00:45 00000000 s (anticasc) anti cascading disabled
2025/04/21 13:00:45 00000000 s (gbox) local gbox failed init
2025/04/21 13:00:45 4378F45B c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2025/04/21 13:00:45 4378F45B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2025/04/21 13:00:45 4378F45B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
2025/04/21 13:00:45 4378F45B c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2025/04/21 13:00:49 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE6 PROVID: 000000
2025/04/21 13:00:49 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 179E PROVID: 000000
2025/04/21 13:00:49 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in CA PMT
2025/04/21 13:00:49 4378F45B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2025/04/21 13:00:49 4378F45B c (dvbapi) Demuxer 0 stopped descrambling for program 006C (5604@000000:006C unknown)
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE7 PROVID: 000000
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 179F PROVID: 000000
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in CA PMT
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE7 PROVID: 000000
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 179F PROVID: 000000
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in PMT
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 5604 PROVID 000000 ECMPID 0BE7 PMTPID 13F5 (NO MATCHING READER)
2025/04/21 13:00:50 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 179F PMTPID 13F5 (NO MATCHING READER)
2025/04/21 13:00:53 4378F45B c (dvbapi) Demuxer 0 stopped descrambling for program 006D (5604@000000:006D unknown)
2025/04/21 13:00:54 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE1 PROVID: 000000
2025/04/21 13:00:54 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1799 PROVID: 000000
2025/04/21 13:00:54 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in CA PMT
2025/04/21 13:00:54 4378F45B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2025/04/21 13:00:55 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE1 PROVID: 000000
2025/04/21 13:00:55 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1799 PROVID: 000000
2025/04/21 13:00:55 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in PMT
2025/04/21 13:00:55 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 5604 PROVID 000000 ECMPID 0BE1 PMTPID 13EF (NO MATCHING READER)
2025/04/21 13:00:55 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1799 PMTPID 13EF (NO MATCHING READER)
2025/04/21 13:00:59 4378F45B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2025/04/21 13:01:00 4378F45B c (dvbapi) Demuxer 0 stopped descrambling for program 0067 (5604@000000:0067 unknown)
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE0 PROVID: 000000
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1798 PROVID: 000000
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in CA PMT
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE0 PROVID: 000000
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1798 PROVID: 000000
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in PMT
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 5604 PROVID 000000 ECMPID 0BE0 PMTPID 13EE (NO MATCHING READER)
2025/04/21 13:01:01 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1798 PMTPID 13EE (NO MATCHING READER)
2025/04/21 13:01:03 4378F45B c (dvbapi) Demuxer 0 stopped descrambling for program 0066 (5604@000000:0066 unknown)
2025/04/21 13:01:03 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE1 PROVID: 000000
2025/04/21 13:01:03 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1799 PROVID: 000000
2025/04/21 13:01:03 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in CA PMT
2025/04/21 13:01:03 4378F45B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2025/04/21 13:01:04 4378F45B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5604 ECM_PID: 0BE1 PROVID: 000000
2025/04/21 13:01:04 4378F45B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0E00 ECM_PID: 1799 PROVID: 000000
2025/04/21 13:01:04 4378F45B c (dvbapi) Demuxer 0 found 2 ECM pids and 6 STREAM pids in PMT
2025/04/21 13:01:04 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 5604 PROVID 000000 ECMPID 0BE1 PMTPID 13EF (NO MATCHING READER)
2025/04/21 13:01:04 4378F45B c (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 1799 PMTPID 13EF (NO MATCHING READER)
2025/04/21 13:01:08 4378F45B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2025/04/21 13:01:08 4378F45B c (dvbapi) Demuxer 0 stopped descrambling for program 0067 (5604@000000:0067 unknown)

 

[ghost0815]

device = C:\Users\********************\SAT-IPTV\softcam.keys.txt <-hab hier einges rumprobiert, der Link passt aufjedenfall nicht.

Das ist schonmal falsch...
Sollte so aussehen

device = emulator

und das löschen

audisabled = 1

in der oscam.conf fehlt -->disablecrccws_only_for -->0E00:000000

[global]
disablecrccws_only_for = 0500:050F00;09C4:000000;098C:000000;098D:000000;0624:000000;0E00:000000

oder in der oscam.server vom Reader

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000

 

[ultima]

Um welche Sender geht es denn genau?

 

[ghost0815]

wollte ein paar Sender auf 9.0E

Ich vermute AFN....

 

[Kind regards]

der EMU Reader wird normaler Weise automatisch angelegt (also den falschen Reader löschen und OSCam neustarten, dan sollte der richtige vorhanden sein)
Built-in SoftCam.Key: yes --> dann sollte ja eine aktuelle SoftCamKey vorhanden sein

2025/04/21 13:00:44 7E3110B2 r (reader) emulator [emu] Reader initialized (device=C:\Users\Benjamin\Documents\SAT-IPTV\softcam.keys.txt, detect=cd, mhz=357, cardmhz=357)

damit wird es jedenfalls nichts

 

[Bnjmnb]

Hallo zusammen, vielen Dank für die schnelle Hilfe. Ja es handelt sich um AFN auf 9.0E. Sobald ich daheim bin werde ich es ausprobieren.
Habs nun bearbeitet, allerdings immer noch kein Erfolg da : (No Matching Reader)

Spoiler: Config

[global]
maxlogsize = 10000
logfile = /tmp/oscam.log;stdout
ecmfmt = c&p/i/s/l:h:w

[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D

[dvbapi]
enabled = 1
au = 0
user = dvbapiau
boxtype = dreambox
extended_cw_api = 1 #[ (1) = OE2.2/2.5-ARM AND (2) = OE2.0-MPISEL ]
boxtype = dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

[webif]
httpport = 8080
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,::1
httposcamlabel = Oscam iCam v9 WebInterface
http_status_log = 1

Spoiler: Server

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 5
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE

Habe so wie King Regards empfohlen hat den bestehenden Reader gelöscht und alles neugestartet. Allerdings bleibt das Bild bei AFN Familiy schhwarz. Eventuell habe ich die Keys bei Softcam.Keys falsch in Format gesetzt (hab ein Bild angehängt? Bin hier echt am verzweifeln, wollte am Wochenende dort NBA und Wrestlemania schauen/aufnehmen aber zieht sich schon sehr lange jetzt.

 

[Kind regards]

es sollte eine SoftCam.Key vorhanden sein und mit den aktuellen Keys aus dem AFN Thread, sollte schon mal Bild sein, ob deine AU Keys die richtigen sind und AU macht weiß ich nicht.

 

[ultima]

AFN auto update wird wohl nicht funktionieren.

 

[ghost0815]

Im Oktober 2024 ging AU noch...
-->PowerVU AFN Autoupdate (9E)
Aktuelle softcam --> https://www.digital-eliteboard.com/resources/