sigismundo
Newbie
- Registriert
- 30. Mai 2015
- Beiträge
- 20
- Reaktionspunkte
- 1
- Punkte
- 3
Achtung: bloody board rookie
Habe den Umstieg von der S02 auf die V14 versucht, und stecke fest.
Leider habe ich die Karte bereits gestern über das KC aktiviert, aber noch mit einem veralteten setup (sc über newcamd)
Nach vielen Versuchen, ein EMM-Log zu erzeugen, habe ich nochmal angerufen, und 310 vorgegeben.
Da bislang keine EMMs kamen, befürche ich jetzt, dass die Aktivierung spurlos an meiner Karte vorbeigegangen ist.
oscam card init:
Auf jeden Fall wurde kein EMM geloggt. Habe daraufhin auf dvbapi umgestellt, EMMs kommen immer noch nicht.
Es werden Tonnen von:
geloggt, weil ich Sport News HD eingestellt habe. VDR beschwert sich über incomplete sections (verm. wegen fehlender Daten).
Environment:
oscam 1.20-10679, vdr 2.2.0, dvbapi 2.2.0 (git as of 20150514)
openSUSE 13.2/x86_64
Smartmouse V1
oscam.conf:
oscam.dvbapi:
oscam.user:
oscam.services:
oscam.server:
Habe beides versucht: mit [global]emmlogdir = /var/log/oscam/emm/ und ohne, dann wäre es ja /etc/oscam.
oscam läuft als root, /var/log/oscam/oscam.log wird einwandfrei geschrieben, /var/log/oscam/emm/ existiert.
Bin mit meinem Latein am Ende, weiss jemand weiter?
Habe den Umstieg von der S02 auf die V14 versucht, und stecke fest.
Leider habe ich die Karte bereits gestern über das KC aktiviert, aber noch mit einem veralteten setup (sc über newcamd)
Nach vielen Versuchen, ein EMM-Log zu erzeugen, habe ich nochmal angerufen, und 310 vorgegeben.
Da bislang keine EMMs kamen, befürche ich jetzt, dass die Aktivierung spurlos an meiner Karte vorbeigegangen ist.
oscam card init:
2015/06/08 15:32:51 7E4A30 r (reader) reader1 [mouse] Reader initialized (device=/dev/smartmouse, detect=cd, mhz=358, cardmhz=358)
2015/06/08 15:32:52 7E4A30 r (reader) reader1 [mouse] card detected
2015/06/08 15:32:52 7E4A30 r (reader) reader1 [mouse] Buffers readed 0 bytes total time_us 75188
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] ATR: 3F XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
2015/06/08 15:32:53 7E4A30 r (reader) reader1 komme nicht weiter[mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] Setting baudrate to 38400 bps
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] Calculated work ETU is 25.98 us reader mhz = 358
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] Buffers readed 0 bytes total time_us 75108
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Card type: P1TV
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Rom version: 20AA
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Credit available on card: 0 euro
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Extended 4C detected
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] FuseByte: 00
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Region Code:
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Country Code: DEU
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Pincode read: 2666
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] PCB settings: FF FF FF FF
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] ready for requests
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] found card system videoguard2
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] card detected
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] ------------------------------------------------------------------
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] +---------+----------+---------------------+---------------------+
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] |------- This card is not active, so no package available! ------|
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] ------------------------------------------------------from-ins70--
2015/06/08 15:32:55 0 s (main) init for all local cards done
2015/06/08 15:32:55 0 s (emmcache) loaded 838 emmcache records from /tmp/.oscam/oscam.emmcache in 2 ms
2015/06/08 15:32:55 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/06/08 15:32:52 7E4A30 r (reader) reader1 [mouse] card detected
2015/06/08 15:32:52 7E4A30 r (reader) reader1 [mouse] Buffers readed 0 bytes total time_us 75188
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] ATR: 3F XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
2015/06/08 15:32:53 7E4A30 r (reader) reader1 komme nicht weiter[mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] Setting baudrate to 38400 bps
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] Calculated work ETU is 25.98 us reader mhz = 358
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] Buffers readed 0 bytes total time_us 75108
2015/06/08 15:32:53 7E4A30 r (reader) reader1 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Card type: P1TV
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Rom version: 20AA
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Credit available on card: 0 euro
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Extended 4C detected
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] FuseByte: 00
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Region Code:
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Country Code: DEU
2015/06/08 15:32:54 7E4A30 r (reader) reader1 [mouse] Pincode read: 2666
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] PCB settings: FF FF FF FF
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] ready for requests
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [mouse] found card system videoguard2
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] card detected
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] ------------------------------------------------------------------
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] +---------+----------+---------------------+---------------------+
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] |------- This card is not active, so no package available! ------|
2015/06/08 15:32:55 7E4A30 r (reader) reader1 [videoguard2] ------------------------------------------------------from-ins70--
2015/06/08 15:32:55 0 s (main) init for all local cards done
2015/06/08 15:32:55 0 s (emmcache) loaded 838 emmcache records from /tmp/.oscam/oscam.emmcache in 2 ms
2015/06/08 15:32:55 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
Auf jeden Fall wurde kein EMM geloggt. Habe daraufhin auf dvbapi umgestellt, EMMs kommen immer noch nicht.
Es werden Tonnen von:
2015/06/08 15:53:49 844A30 c (ecm) vdr (098C&000000/0C20/006C/98
2015/06/08 15:53:50 844A30 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
2015/06/08 15:53:50 844A30 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0000 VPID 03FF
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> No tier found
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/06/08 15:53:50 844A30 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
2015/06/08 15:53:50 844A30 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0000 VPID 03FF
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> No tier found
2015/06/08 15:53:51 7E4A30 r (reader) reader1 [videoguard2] classD3 ins54: no cw --> Tier expired
geloggt, weil ich Sport News HD eingestellt habe. VDR beschwert sich über incomplete sections (verm. wegen fehlender Daten).
Environment:
oscam 1.20-10679, vdr 2.2.0, dvbapi 2.2.0 (git as of 20150514)
openSUSE 13.2/x86_64
Smartmouse V1
oscam.conf:
[global]
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw/
nice = -1
maxlogsize = 2048
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
listen_port = 12344
user = vdr
boxtype = pc
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw/
nice = -1
maxlogsize = 2048
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
listen_port = 12344
user = vdr
boxtype = pc
oscam.dvbapi:
P:098C
I:0
I:0
oscam.user:
[account]
user = vdr
pwd = xxxxxxx
group = 1
au = 1
caid = 098C,09AF,09C4,1702,1833
services = sky
user = vdr
pwd = xxxxxxx
group = 1
au = 1
caid = 098C,09AF,09C4,1702,1833
services = sky
oscam.services:
[sky]
caid = 098C,09AF,09C4,1702,1833
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,001E,0021,0022,0023,0024,0025,0026,0027,0029,002A,002B,0032,0034,0038,0039,0065,0066,0069,006A,006B,006C,006D,006E,006F,0070,0071,0072,0073,0074,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,0086,0087,0088,0089,008A,008C,00A8,00DD,00DE,00DF,00F2,00FB,00FC,00FD,00FE,0101,0102,0104,0105,0106,0107,010B,010C,010E,010F,0110,0111,0115,0116,0118,0119,011A,011B,011F,0120,0122,0123,0124,0125,0129,012A,012C,012D,012E,012F,0133,0134,0135,0136,0137,0138,0139,013D,013E,0140,0141,0142,0143,0147,0148,014A,014B,014C,014D,014E,0151,0152,0154,0159,0163,016D,0191,0201,0203,0204,0206,0FDA,125D,1485,2EFE,4462,700A
caid = 098C,09AF,09C4,1702,1833
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,001E,0021,0022,0023,0024,0025,0026,0027,0029,002A,002B,0032,0034,0038,0039,0065,0066,0069,006A,006B,006C,006D,006E,006F,0070,0071,0072,0073,0074,0075,0076,0077,0078,0079,007A,007B,007C,007D,007E,007F,0080,0081,0082,0083,0084,0086,0087,0088,0089,008A,008C,00A8,00DD,00DE,00DF,00F2,00FB,00FC,00FD,00FE,0101,0102,0104,0105,0106,0107,010B,010C,010E,010F,0110,0111,0115,0116,0118,0119,011A,011B,011F,0120,0122,0123,0124,0125,0129,012A,012C,012D,012E,012F,0133,0134,0135,0136,0137,0138,0139,013D,013E,0140,0141,0142,0143,0147,0148,014A,014B,014C,014D,014E,0151,0152,0154,0159,0163,016D,0191,0201,0203,0204,0206,0FDA,125D,1485,2EFE,4462,700A
oscam.server:
[reader]
label = reader1
protocol = mouse
device = /dev/smartmouse
#device = /dev/smargo1
detect = CD
mhz = 358
cardmhz = 358
services = sky
boxid = 12345678
group = 1
caid = 098C
ndsversion = 2
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,2
saveemm-u = 1
saveemm-unknown = 1
# block all EMMs
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
label = reader1
protocol = mouse
device = /dev/smartmouse
#device = /dev/smargo1
detect = CD
mhz = 358
cardmhz = 358
services = sky
boxid = 12345678
group = 1
caid = 098C
ndsversion = 2
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,2
saveemm-u = 1
saveemm-unknown = 1
# block all EMMs
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
Habe beides versucht: mit [global]emmlogdir = /var/log/oscam/emm/ und ohne, dann wäre es ja /etc/oscam.
oscam läuft als root, /var/log/oscam/oscam.log wird einwandfrei geschrieben, /var/log/oscam/emm/ existiert.
Bin mit meinem Latein am Ende, weiss jemand weiter?