AW: Anleitung und Tool´s für ein Jtag eines SL35 mit E1
hi. wenn ich "xeloa" angestellt habe, dann kriege ich folgende meldung:
D:\sat\GUI_Flaps_1_0_1_0_für _XP_und _VISTA\wholeflash.bin
flaps/flaps.exe -flash:wholeflash /alienable /fast /skipdetect /xeloa /fc:XX /instrlen:5
JTAG gestartet
=====================================================
FLAPS MIPS EJTAG Flash Utility probes-v1.5
Report bugs in
=====================================================
waiting 5 seconds
Selected port = 0x0378
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00000000000000000000000000000000 (00000000)
*** CHIP DETECTION OVERRIDDEN ***
- EJTAG IMPCODE ............... : 00000000000000000000000000000000 (00000000)
- EJTAG Version ............... : 1 or 2.0
- EJTAG Implementation flags .. : R4k DMA MIPS32
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Done
Halting Processor ... <Processor did NOT enter Debug Mode!> ... Done
Init PrAcc ... Skipped
Clearing Watchdog ... Done
Enabling Flash access (ALi) ... Done
Probing Flash at (Flash Window: 0xafc00000) ... Done
Probing Flash in byte mode...
Probing Flash at (Flash Window: 0xafc00000) ...
JTAG erfolgreich
Done
*** Unknown or NO Flash Chip Detected ***
*** REQUESTED OPERATION IS COMPLETE ***
P.S. hier ist paar bilder, mein JTAG-kabel. welcher typ?
hi. wenn ich "xeloa" angestellt habe, dann kriege ich folgende meldung:
D:\sat\GUI_Flaps_1_0_1_0_für _XP_und _VISTA\wholeflash.bin
flaps/flaps.exe -flash:wholeflash /alienable /fast /skipdetect /xeloa /fc:XX /instrlen:5
JTAG gestartet
=====================================================
FLAPS MIPS EJTAG Flash Utility probes-v1.5
Report bugs in
Sie müssen registriert sein, um Links zu sehen.
-- Jtag M3329 =====================================================
waiting 5 seconds
Selected port = 0x0378
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00000000000000000000000000000000 (00000000)
*** CHIP DETECTION OVERRIDDEN ***
- EJTAG IMPCODE ............... : 00000000000000000000000000000000 (00000000)
- EJTAG Version ............... : 1 or 2.0
- EJTAG Implementation flags .. : R4k DMA MIPS32
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Done
Halting Processor ... <Processor did NOT enter Debug Mode!> ... Done
Init PrAcc ... Skipped
Clearing Watchdog ... Done
Enabling Flash access (ALi) ... Done
Probing Flash at (Flash Window: 0xafc00000) ... Done
Probing Flash in byte mode...
Probing Flash at (Flash Window: 0xafc00000) ...
JTAG erfolgreich
Done
*** Unknown or NO Flash Chip Detected ***
*** REQUESTED OPERATION IS COMPLETE ***
P.S. hier ist paar bilder, mein JTAG-kabel. welcher typ?