Risolto Configurare la TVsat e SkyIt

[mareblue73]

salve a tutti mi è appena arrivato il mio easymouse2 ma ubuntu non me lo riconosce quando cerco di fare la guida how-to under mi dice root@ubuntu:~# ls -l /dev/ttyUSB*
ls: impossibile accedere a /dev/ttyUSB*: File o directory non esistente come devo risolvere

sono riuscito a risolvere probleme ma ho buio totale per quanto ho fatto copia e incolla sia del how-to undev ke delle confing di oscam il lettore easymouse presenta tutti i led spenti
ho notato che guardando sul web la oscam mi scrive

ERROR: Opening device /dev/sceda1 # TIVUSAT e stato fissato con udev (errno=2 No such file or directory)
2013/02/15 13:37:33 908B480 r tivusat [mouse] Cannot open device: /dev/sceda1 # TIVUSAT

e stato fissato con udevriguardando il file etc/udev/rules.d aperto il 10-usbadapter. rules mi trovo al interno ciò che ho creato io

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A10134HZ", SYMLINK+="Sceda1"

ovviamente nella oscam ho inserito su device = /dev/sceda1 mi manca una cosa sola " rsakey = A92.....64B5" iop ho messo cosi come si vede ma credo che sia sbagliato e non so dove trovare la mia rsakey

 

[meister85]

AW: Configurare la TVsat e SkyIt

Metti prima su ubuntu:

sudo -i

e poi

ls -l /dev/ttyUSB*

Dimmi cosa esce!

 

[mareblue73]

Re: AW: Configurare la TVsat e SkyIt

crw-rw---- 1 root dialout 188, 0 feb 15 13:17 /dev/ttyUSB0

 

[meister85]

AW: Configurare la TVsat e SkyIt

Ora:

udevadm info -n /dev/ttyUSB0 -a

 

[mareblue73]

Re: AW: Configurare la TVsat e SkyIt

Spoiler

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0/usb4/4-1/4-1:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0/usb4/4-1/4-1:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{port_number}=="0"
    ATTRS{latency_timer}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0/usb4/4-1/4-1:1.0':
    KERNELS=="4-1:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{supports_autosuspend}=="1"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{interface}=="FT232R USB UART"

  looking at parent device '/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0/usb4/4-1':
    KERNELS=="4-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="1"
    ATTRS{idVendor}=="0403"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{busnum}=="4"
    ATTRS{devnum}=="2"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}==" 90mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="0"
    ATTRS{bcdDevice}=="0600"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="A10134HZ"
    ATTRS{version}==" 2.00"
    ATTRS{urbnum}=="16"
    ATTRS{manufacturer}=="FTDI"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="6001"
    ATTRS{bDeviceClass}=="00"
    ATTRS{product}=="FT232R USB UART"

  looking at parent device '/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0/usb4':
    KERNELS=="usb4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="0"
    ATTRS{idVendor}=="1d6b"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{authorized_default}=="1"
    ATTRS{busnum}=="4"
    ATTRS{devnum}=="1"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="2"
    ATTRS{bcdDevice}=="0305"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="0000:03:00.0"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="34"
    ATTRS{manufacturer}=="Linux 3.5.0-17-generic uhci_hcd"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="0001"
    ATTRS{bDeviceClass}=="09"
    ATTRS{product}=="UHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:14.4/0000:02:04.0/0000:03:00.0':
    KERNELS=="0000:03:00.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="uhci_hcd"
    ATTRS{irq}=="16"
    ATTRS{subsystem_vendor}=="0x1106"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x0c0300"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{local_cpus}=="ff"
    ATTRS{device}=="0x3038"
    ATTRS{enable}=="1"
    ATTRS{msi_bus}==""
    ATTRS{local_cpulist}=="0-7"
    ATTRS{vendor}=="0x1106"
    ATTRS{subsystem_device}=="0x3038"

  looking at parent device '/devices/pci0000:00/0000:00:14.4/0000:02:04.0':
    KERNELS=="0000:02:04.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="yenta_cardbus"
    ATTRS{irq}=="16"
    ATTRS{subsystem_vendor}=="0x1025"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x060700"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{local_cpus}=="ff"
    ATTRS{device}=="0x1411"
    ATTRS{enable}=="2"
    ATTRS{msi_bus}=="1"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{vendor}=="0x1524"
    ATTRS{subsystem_device}=="0x0065"

  looking at parent device '/devices/pci0000:00/0000:00:14.4':
    KERNELS=="0000:00:14.4"
    SUBSYSTEMS=="pci"
    DRIVERS==""
    ATTRS{irq}=="0"
    ATTRS{subsystem_vendor}=="0x0000"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x060401"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{local_cpus}=="ff"
    ATTRS{device}=="0x4342"
    ATTRS{enable}=="1"
    ATTRS{msi_bus}=="1"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{vendor}=="0x1002"
    ATTRS{subsystem_device}=="0x0000"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

 

[meister85]

AW: Configurare la TVsat e SkyIt

Per favore la prossima volta usa un spoiler! https://www.digital-eliteboard.com/showthread.php?227979-Come-usare-un-spoiler!

Ora:

cat /etc/udev/rules.d/10-usbadapter.rules

 

[mareblue73]

ok grazie
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A10134HZ", SYMLINK+="Sceda1"

- - - Aktualisiert - - -

ho capito ora come funziona spoiler scusami

 

[meister85]

AW: Configurare la TVsat e SkyIt

OK fino qui tutto ok!

La oscam.server come lai settata?

 

[mareblue73]

Re: AW: Configurare la TVsat e SkyIt

Spoiler

[reader]
label = skyitalia
protocol = mouse
device = /dev/SKYIT # SKYIT e stato fissato con udev, per chi nn vuole usare udev, si puo anche mettere tipo /dev/ttyUSB0
caid = 093b
boxid = 1234567 # vostro BoxId
detect = cd
mhz = 1000
cardmhz = 357
ident = 093b:000000
group = 1
emmcache = 1,3,2

[reader]
label = tivusat
protocol = mouse
device = /dev/sceda1 # TIVUSAT e stato fissato con udev, per chi nn vuole usare udev, si puo anche mettere tipo /dev/ttyUSB0
caid = 183D
rsakey = A92.....64B5
detect = cd
mhz = 357
cardmhz = 357
ident = 183D:000000,005411
group = 2
emmcache = 1,3,2 ]

p.s attualmente vorrei configuarare solo tvsat

 

[meister85]

AW: Configurare la TVsat e SkyIt

Allora metti solo questo nella oscam.server:

[reader]
label = tivusat
protocol = mouse
device = /dev/sceda1
caid = 183D
rsakey = A92.....64B5
detect = cd
mhz = 357
cardmhz = 357
ident = 183D:000000,005411
group = 2
emmcache = 1,3,2

La rsakey la devi fare calcolare con questo tool:

Link ist nicht mehr aktiv.

 

[mareblue73]

Re: AW: Configurare la TVsat e SkyIt

messo confing su oscam server ed ho cancellato quella di sky ma perdona ignoranza come si usa questo tool

 

[meister85]

AW: Configurare la TVsat e SkyIt

Ti ho mandato la rsakey in PM ;-)

 

[mareblue73]

Re: AW: Configurare la TVsat e SkyIt

mi da sempre quest'errore

Spoiler

2013/02/15 15:53:45 A1A9B08 r tivusat [mouse] Cannot open device: /dev/sceda1
2013/02/15 15:54:45 A1A9B08 r tivusat [mouse] ERROR: Opening device /dev/sceda1 (errno=2 No such file or directory)
2013/02/15 15:54:45 A1A9B08 r tivusat [mouse] Cannot open device: /dev/sceda1

 

[meister85]

AW: Configurare la TVsat e SkyIt

Prova a mettere il Device cosi:

device = /dev/ttyUSB0

 

[mareblue73]

mi sa che cosi va a buon fine a ancora ho buio totale in webinfo mi esce

Spoiler

2013/02/18 21:59:04 90626F0 c anonymous disconnected from 127.0.0.1
2013/02/18 21:59:04 90626F0 c thread B7333B40 ended!
2013/02/18 21:59:11 9178190 c client connected to 13500 port
2013/02/18 21:59:11 9178190 c encrypted newcamd:13500-client 127.0.0.1 granted (usertivu, au=on (1 reader))
2013/02/18 21:59:11 9178190 c user usertivu authenticated successfully (CCcam)
2013/02/18 21:59:11 9178190 c AU enabled for user usertivu on reader tivusat

modificando file user il tutto funziona inizio ad avere luce ora ho un ultima domanda mi trovo su tvsat 114 ecm in locale posso abbassarli un po ? e come ?
ultima domanda per aggiungere un easymouse per sky devo configurare under con device = /dev/ttyUSB1 ?
come sempre grazie