AW: FAQ: CCcam/NewCS
Ihr seid nun meine letzte Hoffnung, speziell hoffe ich zugegebenermaßen auf Phantom,
Ich fange mal von vorne an. Ich beabsichtige (zunächst) internes CS über meine FB 7270 als Server mit CCcam. Clients sind die Kathi UFS910 und meine gute alte Dbox2 von Nokia, die ich jetzt aber erst einmal vernachlässige. Ich habe einen aktiven HUB, einen Sandisk USB-Stick, auf dem sich die notwendigen Dateien befinden, zu dem den Smargo+ Cardreader von MaxDigial.
CCcam auf der FB läuft. Incubus läuft auf der Kathi ebenfalls. Ich kann natürlich gerne meine CCcam config und die incubus config posten.
Es geht natürlich darum, dass ich das Programm nicht hell bekomme. Ich habe mir zunächst eine S02-Sat Karte mit dem Cinema-Paket ausgeliehen.
Wenn ich incubus starte, erscheint auf dem Display des TV
Nagravision ECM... Betacrypt ... NDS ECM wechselt ständig
Dann: prov: 000000
cw0: 00 00 00 00 ....
cw1: 00 00 00 00 .....
using: cardcard share ... card reader .... device (null) wechselt ... Allerdings selten der Wechsel auf card reader.
Teilweise werden die 00 auch durch Buchstaben und Zahlen ersetzt.
Was mich wundert ist, dass ich weder auf das WI der CCcam, noch auf das von incubus komme!? Warum komme ich weder auf das WI der CCcam, noch auf das von incubus, obwohl ich WI enabled habe?!
Hat einer eine Idee, woran das liegen kann? Wie sieht es mit der Windows Firewall aus, Freigaben an der FB??
Einige schreiben, dass die CCcam.config so aussehen muss: SERIAL READER: /dev/ttyUSB
smartreader+
Andere schreiben: SERIAL READER: /dev/ttyUSB/0
smartreader+
Ich habe: SERIAL READER: /dev/ttyUSB0
smartreader+
Was ist denn richtig? Es kann doch nicht alles richtig sein, oder?
Dann habe ich gelesen, dass der USB-Stick in der FB FAT 16-formatiert sein muss. Ich weiß gar nicht genau, ob ich den nicht sogar FAT 32-formatiert habe. Aber würde ich dann die CCcam so zum Laufen bringen?
Ich bin nun dabei, Ursachenforschung zu betreiben, komme aber nicht weiter und muss daher wohl ganz vorne anfangen.
Ich hänge nun auch noch einmal die beiden configs an.
CCCam.config:
F: MandelHL ******** 2 0 1 { 0:0:1 } # F:Line der Box
F: Vater ******** 2 0 1 { 0:0:1 } # F:Line für Vater Box
F: Locke ******** 2 0 1 { 0:0:1 } # F:Line für Lockes Box
#
SERVER LISTEN PORT : 33539
SERIAL READER: /dev/ttyUSB0
smartreader+
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
WEBINFO LISTEN PORT : 16001
#MINIMUM DOWNHOPS: 0
DISABLE EMM: yes
SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
incubus.config
################################################## ############################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
################################################## ############################
########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=0
# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=0
# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=0
# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=0
# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/var/bin/incubusCamd.log
# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key
# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/bin/incubusCamd.prio
# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0
# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=0
console_logs_broadcast_port=666
# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=1
webif_port=668
########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#
[Prov:000000:CaID:0000]
# ----------------------------------------------------------------------------
# this provider is a stand-in for all cards and all caid not declared previously
#
# You can select wich type of priority to assign on each caid/prov combination
# priority name available are: card,emu,cs
# card: internal card reader
# emu: internal emulator
# cs: card share protocols
# each type must be separated by a comma
#
# you can also set to use only cs and nothing more, to do it insert on each comma "cs"
# example: check_priority=cs,cs,cs # only cs in this case
# example: check_priority=card,emu,emu # no cs in this case
# obviously this is not suggested but if you prefer to disable an option you should do it in this way
# you can also declare only one type: check_priority=cs
# or two types: check_priority=cs,emu
# and so on
check_priority=cs,emu,card
# You can select wich protocol will be used first for the current caid/prov combination
# protocol name available are: newcamd,cccam,gbox,radegast,camd33,camd35,aroureos
# each protocol must be separated by a comma
#
# you can also declare only one type: cs_protocol_order=cccam
# or two types: cs_protocol_order=cccam,newcamd
# and so on
cs_protocol_order=cccam,newcamd,gbox,camd35,camd33 ,radegast,aroureos
# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0
# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0
# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0
# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0
# Enable (1) or disable (0) seca 3 ecm pid handler
# when is set to On, it will try to use seca 3 ecm pid
# before try seca 2 ecm pid, otherwise seca 2 pid will
# be selected firstly
# 0 - Off
# 1 - On
#
seca3_handler=0
#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam,newcamd,gbox,camd35,camd3 3,radegast,aroureos
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
#seca3_handler=0
########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username_31>:<password_31>@<hostname>:<port>:<cai d_4>:<prov_id_6>/<des_key_14>/[EMM]
# aroureos://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# radegast://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# camd33://<username_10>:<password_10>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[aes_key_16]/[EMM]
# camd35://<username_32>:<password_32>@<hostname>:<port>:<cai d_4>:<prov_id_6>/[EMM]
# gbox://<localhost>:<localport>:<password_8>@<peer_address >:<peer_port>:<peer_pass_8>/[EMM]
#
# cccam://<username_20>:<password_32>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
# i.e:
#
#card_server_url=cccam://username
assword@192.168.1.24:12000
#card_server_url=cccam://username
assword@yourname.dyndns.org:15000
#card_server_url=gbox://yourname.dyndns.org:6666
assword@hisname.dyndns.o rg:6666
eer_pass
#card_server_url=cccam://username
assword@hostname
ort
#card_server_url=gbox://192.168.1.24:5555
assword@192.168.1.32:4444
eer_ pass
#card_server_url=newcamd://username
assword@192.168.0.100:10550:0500:028800/0102030405060708091011121314
#card_server_url=radegast://@192.168.0.100:10550:0100:000065
#card_server_url=aroureos://@yourhostname.dyndns.org:10666:0500:007C00
#card_server_url=camd35://username
assword@192.168.0.50:14150:0603:000000
#card_server_url=camd33://username
assword@192.168.0.50:10550:0603:000000 # cam33 without AES encryption
#card_server_url=camd33://username
assword@192.168.0.50:10500:0604:000000/01020304050607080910111213141516 # cam33 with AES encryption
card_server_url=cccam://MandelHL:********@192.168.178.1:33539
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
#
#1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
#1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
1833:1702:000000:0080 #History HD
1833:1702:000000:0081 #Sky Sport HD
1833:1702:000000:0082 #Discovery HD
1833:1702:000000:0083 #Sky Cinema HD
1833:1702:000000:0084 #EuroSport HD
1833:1702:000000:007E #Disney Cinemagic HD
1833:1702:000000:007F #National Geography HD
