HD01 Probleme nach OScam-Neustart

[dogfight76]

AW: HD01 Probleme nach OScam-Neustart

Habe jetzt mal nicht in den Files sondern direkt im Reader auf 600Mhz gestellt, steht jetzt auch im Log:

Spoiler

• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] ATR: 3F xxxxxxxxxxxxxxxxxxxxxxxxxx
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Setting baudrate to 115200 bps
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] ERROR: not ready to write, timeout=0 ms
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=741 us
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Card responded ok for ifsd request of 251
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] card system not supported
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] ATR: 3F xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/10/22 17:33:02 B701FA78 r hdplus2 [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/10/22 17:33:03 B701FA78 r hdplus2 [mouse] card system not supported
• 2014/10/22 17:33:03 B701FA78 r hdplus2 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/10/22 17:33:03 B701FA78 r hdplus2 [mouse] card initializing error

- - - - - - - - - -

Habe jetzt mal nicht in den Files sondern direkt im Reader auf 600Mhz gestellt, steht jetzt auch im Log:

Spoiler

• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] ATR: 3F xxxxxxxxxxxxxxxxxxxxxxxxxx
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Setting baudrate to 115200 bps
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] ERROR: not ready to write, timeout=0 ms
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=741 us
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Card responded ok for ifsd request of 251
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] card system not supported
• 2014/10/22 17:32:57 B701FA78 r hdplus2 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] ATR: 3F xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
• 2014/10/22 17:32:59 B701FA78 r hdplus2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2014/10/22 17:33:02 B701FA78 r hdplus2 [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/10/22 17:33:03 B701FA78 r hdplus2 [mouse] card system not supported
• 2014/10/22 17:33:03 B701FA78 r hdplus2 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/10/22 17:33:03 B701FA78 r hdplus2 [mouse] card initializing error

 

[dodo83]

AW: HD01 Probleme nach OScam-Neustart

die Easymouse ist auch dazu richtig eingestellt?
poste mal wie die Dip Schalter stehen

 

[dogfight76]

AW: HD01 Probleme nach OScam-Neustart

Schalterstellung (wie gehabt, da nicht verändert. Aber gerade kontrolliert)

unten-unten-oben-oben

 

[dodo83]

AW: HD01 Probleme nach OScam-Neustart

hast du mal den Server komplett neu gestartet?

 

[dogfight76]

AW: HD01 Probleme nach OScam-Neustart

Ne, noch kein kompletten Neustart gemacht. Mal Testen ?

Moment.........

 

[dogfight76]

AW: HD01 Probleme nach OScam-Neustart

So getest und zwar so:

Server runtergefahren
USB-HUB raus
Server Neustart
USB-HUB wieder rein
Reader Neustart

Und es läuft wieder......warum auch immer !! Danke :emoticon-0150-hands

 

[Pilot]

AW: HD01 Probleme nach OScam-Neustart

Glückwunsch.
Wenn dein Server eine Fritzbox ist, reicht oscam Neustart nicht aus. Es muß auch die Fritzbox neu gebootet werden.