OSCam auf Client läuft nicht

[webman2]

AW: OSCam auf Client läuft nicht

Poste doch mal bitte alle Deine Oscam-Dateien .. von Server und Client.

 

[Coachi]

So, alte Konfiguration mit CCCam läuft wieder.

So, also nochmal von neuen.
Hab nun die Configs für den Client so wie von Dir gepostet.

Die OSCam-Dateien vom Server sind wieder so wie oben von mir gepostet.

 

[webman2]

AW: OSCam auf Client läuft nicht

Wenn Du nicht alle Karten (sprich: Oscam-Dateien) hier offenlegst, ist es hier nur Raterei.

Wo sind die Oscam-Dateien vom Server ?

 

[Coachi]

AW: OSCam auf Client läuft nicht

Oscam-Dateien vom Server (stehen bereits hier im Thread ganz oben auf dieser Seite):
oscam.conf

Spoiler

[global]
disablelog = 0
loghistorysize = 4096
serverip = 0.0.0.0
logfile = /var/log/ipc/OScam.log
initial_debuglevel = 0
sysloghost =
syslogport = 514
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir = /var/log/ipc/
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_reopen_invalid = 1
lb_force_reopen_always = 0
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheex_mode1_delay =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
csp_block_fakecws = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

[cccam]
port = 12345
serverip = 0.0.0.0
nodeid = 5526F84610771474
version = 2.3.0
reshare = 10
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[webif]
httpport = 16000
serverip = 0.0.0.0
httpuser = XXX1
httppwd = XXX1
httpcss =
httpjscript =
httpscript =
httptpl =
httppiconpath =
httphelplang = de
httplocale =
http_prepend_embedded_css = 0
httprefresh = 10
httppollrefresh = 60
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,0.0.0.0-255.255.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpoverwritebakfile = 0
httpcert =
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam
httpemmuclean = 256
httpemmsclean = -1
httpemmgclean = -1
http_status_log = 0

oscam.server

Spoiler

[reader]
label = V14
description =
enable = 1
protocol = smartreader
device = Serial:smargoRB
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid = 098C
atr =
boxid = 12345678
boxkey =
rsakey =
deskey =
ins7e =
ins7e11 = 15
ins2e06 =
fix07 = 1
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 534
cardmhz = 369
ident =
chid =
class =
aeskeys =
group = 10
emmcache = 0,1,0,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 0
saveemm-u = 1
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 1

[reader]
label = HD+
description =
enable = 0
protocol = mouse
device = /dev/ttyUSB8
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid =
atr =
boxid =
boxkey =
rsakey =
deskey =
ins7e =
ins7e11 =
ins2e06 =
fix07 = 1
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 1

[reader]
label = camd3emu
description =
enable = 0
protocol = cs357x
device = 127.0.0.1,20248,0
key =
user = meinserver
password = meinserverpass
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
cccam_reshare = 5
services =
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 30
reconnectdelay = 60000
keepalive = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid =
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,1,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

oscam.version

Spoiler

Unix starttime: 1456009430
Starttime: 21.02.2016 00:03:50
Version: oscam-1.20-unstable_svn-r10933
Compiler: arm-linux-gnueabihf
Box type: generic (generic)
TempDir: /tmp/.oscam
ConfigDir: /var/etc/
WebifPort: 16000

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: no
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

oscam.user

Spoiler

[account]
user = XXX1
pwd = XXX1
uniq = 1
group = 10
au = V14
cccmaxhops = 1
cccreshare = 0

[account]
user = XXX2
pwd = XXX2
group = 10
uniq = 1
cccmaxhops = 1
cccreshare = 0

[account]
user = XXX3
pwd = XXX3
group = 10
uniq = 1
cccmaxhops = 1
cccreshare = 0

 

[webman2]

AW: OSCam auf Client läuft nicht

Ach so, das waren die Dateien vom Server - hattest Du aber nicht geschrieben.

Dann so ändern:

oscam.conf

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 1500
preferlocalcards = 1


[cache]

[cccam]
port = 12345
nodeid = 5526F84610771474
version = 2.3.0

[webif]
httpport = 16000
httpuser = xxx
httppwd = xxx
httphelplang = de
httprefresh = 10
httpshowecminfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,0.0.0.0-255.255.255.255

oscam.server

Spoiler

[reader]
label = V14
enable = 1
protocol = smartreader
device = Serial:smargoRB
boxid = 12345678
detect = cd
ins7e11 = 15
readtiers = 2
mhz = 534
cardmhz = 369
caid = 098C
group = 1
emmcache = 0,1,0,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.user

Spoiler

[account]
user = xxxx -> s. Oscam proxy
pwd = xxxx -> s. Oscam proxy
au = 1
group = 1

 

[Coachi]

AW: OSCam auf Client läuft nicht

Um nochmal auf Nummer sicher zu gehen.
Auf dem Client habe ich die Dateien nun genau so wie von Dir gepostet.
Und auf dem Server mach eich nun die Änderungen die Du eben gepostet hast.

Muss ich in der oscam.server des Clients nicht auch der Reader V14 heißen?

 

[Bodo-1]

AW: OSCam auf Client läuft nicht

Nein das Label spielt hier keine Rolle

 

[tulpenknicker]

AW: OSCam auf Client läuft nicht

Nein muss er nicht. Auf dem client kannst du jeden beliebigen anderen namen vergeben

 

[webman2]

AW: OSCam auf Client läuft nicht

#20 : Oscam-Dateien für Server
#14 : Oscam-Dateien für Client

 

[Coachi]

AW: OSCam auf Client läuft nicht

Okay, danke. Dann werde ich das jetzt mal im Server eingeben.
Alles andere lösche ich aus den Server-Dateien.
bei der oscam.user auf dem Server muss ich einen zusätzlichen User eingeben?

 

[webman2]

AW: OSCam auf Client läuft nicht

Du musst den user so konfigurieren, wie Du ihn im oscam-Proxy (Client) definiert hast.

 

[Coachi]

AW: OSCam auf Client läuft nicht

Also kann ich meinen CCCam User:

Spoiler

[account]
user = XXX1
pwd = XXX1
uniq = 1
group = 10
au = V14
cccmaxhops = 1
cccreshare = 0

wie folgt anpassen:

Spoiler

[account]
user = XXX1 (user aus dem oscam-Proxy Client)
pwd = XXX1 (pwd aus dem oscam-Proxy Client)
au = 1
group = 1

weil ich auf diesem Client nun OSCam laufen habe, auf den anderen Clients läuft weiterhin CCCam.
Ist das richtig?

 

[webman2]

AW: OSCam auf Client läuft nicht

Die oscam.server beim client sähe dann so aus ..

Spoiler

[reader]
label = V14
protocol = cccam
device = IP-Adresse,12345
user = XXX1
password = XXX1
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
ccckeepalive = 1

 

[Coachi]

AW: OSCam auf Client läuft nicht

Dann starte ich die Systeme jetzt mal neu.

 

[webman2]

AW: OSCam auf Client läuft nicht

Ein Oscam reboot hätte wohl gereicht.