,debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPSdebug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.20, My IP 192.168.178.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: #################################################################
##########################################################
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.178.20; our IP address is 192.168.178.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: #################################################################
##################################################
done
Bytes transferred = 586812 (8f43c hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626984 Bytes = 612.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 586748 Bytes = 573 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f1f000, end 01fae3fc ... OK
Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.178.202:192.168.178.20:::::off
Decrementer Frequency = 247125000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2b:57:c2
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.178.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.178.202, domain=, nis-domain=(none),
bootserver=192.168.178.20, rootserver=192.168.178.20, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 572k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.13.0 (2008-11-29 23:52:02 CET
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
dbox2 - ImageFlashingAssistent 3.x
- Hallenberg.com -
Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
done.
Sende Backup...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)
Sie koennen die dbox jetzt ausschalten.
-------------------------------------------------------------
BootP: Request von 00509C2B57C2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C2B57C2 gesetzt
BootP: Antwort an 00509C2B57C2 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C2B57C2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C2B57C2 gesetzt
BootP: Antwort an 00509C2B57C2 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C2B57C2 erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C2B57C2 gesetzt
BootP: Antwort an 00509C2B57C2 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Users\sa\Desktop\Keywelt_V1.00_August_2x_SQUASHFS_2013.img
TFTP: Transfer erfolgreich beendet
TFTP: Schreibe Backup nach C:\Program Files (x86)\DBOX_IFA\Backups\2013-12-16 14-24-07_534.img
TFTP: Transfer erfolgreich beendet
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek PCIe GBE Family Controller (2)
IP-Adresse des Netzwerkadapters: 192.168.178.20
IP-Adresse die die dbox bekommt: 192.168.178.202
Betriebssystem: Professional Service Pack 1 (Build 7601)
CPU 1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz @ 726 MHz
CPU 2: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz @ 544 MHz
Dateiname des Images: Keywelt_V1.00_August_2x_SQUASHFS_2013.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.4
------ Powered by http://www.dboxservice-hallenberg.de ------