keine user können mehr connecten

[pehedima]

AW: keine user können mehr connecten

Deine V13 wird nicht korrekt gelesen.

Wie ist deine Easy eingestellt, in der die V13 steckt?
Sollte bei den Einstellungen wie folgt aussehen:

oben,unten,unten,egal

Bitte prüfen.

Schalte den Reader ein: enable = 1 und starte die komplette Box neu, nicht nur oscam.
Dann poste bitte ein vollständiges Logfile von oscam start an.
Das findest du im WebIf von oscam unter 'Files' und dann 'logfile'.


Poste bitte nicht die LiveLog Ausschnitte, die taugen i.d.R. nichts, da die immer viel zu kurz sind.

 

[Mogelhieb]

AW: keine user können mehr connecten

Ich hatte auch mal das gleiche Problem. Mit einem mal konnte kein einziger Klient mehr connecten. Am Ende kam heraus, dass ein Reader falsch eingestellt war. Beim Staubwedeln muss meine Reinigungskraft an einen Dippschalter der Easymouse 2 gekommen sein.

Das diese kleine Ursache so eine dramatische Auswirkung hatte, rief mein Erstaunen hervor. Es hat auch eine Weile gedauert, bis ich den falsch Konfigurierten Reader ausgemacht hatte.

 

[mbnoob]

AW: keine user können mehr connecten

im status geht die karte. wenn ich auf logfile klicke, lädt und lädt und lädt das teil.

wie müssen die schalter bei hd02 karte stehen ?

 

[4gx35]

AW: keine user können mehr connecten

es ist doch eher unsinnig, die vu per newcamd zu verbinden,
warum nimmst du kein cccam protokoll, mach mal
[cccam]
port = 33333
version = 2.3.0
reshare = 1

in die oscam.conf und verbinde dich per c-line (oder cccam reader falls oscam auf der vu)
und deaktiviere beide reader, bis connect da ist

fast alle clients werden wohl mindestens cccam verwenden können ?

 

[pehedima]

AW: keine user können mehr connecten

wenn ich auf logfile klicke, lädt und lädt und lädt das teil.

Ja ist klar.
Dann solltest du mal dein Logfile verkleinern. Derzeit maxlogsize = 2480 ist absolut zu groß und nicht nötig.
Setze mal den Wert auf

maxlogsize           = 256

Das reicht.

Am besten die alte Logdatei zuerst auf dem PC sichern und am Server löschen.
Danach oscam neu starten und das Logfile posten.

 

[mbnoob]

AW: keine user können mehr connecten

Spoiler

>> OSCam << cardserver log switched at Mon Aug 31 12:29:58 2015
-------------------------------------------------------------------------------
2015/08/31 12:29:58 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10961 (i486-linux-gnu)
2015/08/31 12:29:58 00000000 s (main) System name = Linux
2015/08/31 12:29:58 00000000 s (main) Host name = debian
2015/08/31 12:29:58 00000000 s (main) Release = 3.2.0-4-486
2015/08/31 12:29:58 00000000 s (main) Version = #1 Debian 3.2.41-2+deb7u2
2015/08/31 12:29:58 00000000 s (main) Machine = i586
2015/08/31 12:29:58 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2564
2015/08/31 12:29:58 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/08/31 12:29:58 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/08/31 12:29:58 00000000 s (main) signal handling initialized
2015/08/31 12:29:58 00000000 s (config) 173 service-id's loaded in 3 ms
2015/08/31 12:29:58 00000000 s (net) newcamd: initialized (fd=6, port=1001)
2015/08/31 12:29:58 00000000 s (net) -> CAID: 09C4 PROVID: 000010
2015/08/31 12:29:58 00000000 s (net) newcamd: initialized (fd=7, port=1002)
2015/08/31 12:29:58 00000000 s (net) -> CAID: 1843 PROVID: 003511
2015/08/31 12:29:58 00000000 s (reader) Sky [mouse] creating thread for device /dev/sky
2015/08/31 12:29:58 00000000 s (reader) hd [mouse] creating thread for device /dev/hd
2015/08/31 12:29:58 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/08/31 12:29:58 00000000 s (main) waiting for local card init
2015/08/31 12:29:58 01B657FC h (webif) webif: decompressed 163552 bytes back into 390900 bytes
2015/08/31 12:29:58 01B657FC h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/08/31 12:29:58 43855083 r (reader) hd [mouse] Buffers readed 0 bytes total time_us 75099
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75387
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 1 value 03 time_us 2055
2015/08/31 12:29:58 43855083 r (reader) hd [mouse] Flush readed byte Nr 1 value 03 time_us 4017
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 2 value 00 time_us 67874
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 3 value d7 time_us 941
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 4 value 5b time_us 1930
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 5 value 3f time_us 942
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 6 value f7 time_us 1927
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 7 value fe time_us 939
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 8 value 7d time_us 1939
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 9 value f2 time_us 1929
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 10 value 1f time_us 938
2015/08/31 12:29:58 43855083 r (reader) hd [mouse] Buffers readed 1 bytes total time_us 79224
2015/08/31 12:29:58 43855083 r (reader) hd [mouse] Reader initialized (device=/dev/hd, detect=cd, mhz=600, cardmhz=369)
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 11 value 69 time_us 2428
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 12 value 00 time_us 451
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 13 value ad time_us 1917
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 14 value f5 time_us 941
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 15 value f1 time_us 1929
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 16 value ff time_us 944
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 17 value ff time_us 1931
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 18 value f5 time_us 1936
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 19 value 73 time_us 941
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 20 value 7f time_us 1856
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 21 value ff time_us 874
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Flush readed byte Nr 22 value d7 time_us 1862
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Buffers readed 22 bytes total time_us 176281
2015/08/31 12:29:58 3F957D45 r (reader) Sky [mouse] Reader initialized (device=/dev/sky, detect=cd, mhz=357, cardmhz=357)
2015/08/31 12:29:59 43855083 r (reader) hd [mouse] card detected
2015/08/31 12:29:59 3F957D45 r (reader) Sky [mouse] card detected
2015/08/31 12:29:59 3F957D45 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75152
2015/08/31 12:29:59 43855083 r (reader) hd [mouse] Buffers readed 0 bytes total time_us 75152
2015/08/31 12:30:00 3F957D45 r (reader) Sky [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/08/31 12:30:00 3F957D45 r (reader) Sky [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/08/31 12:30:00 3F957D45 r (reader) Sky [mouse] Setting baudrate to 9600 bps
2015/08/31 12:30:00 3F957D45 r (reader) Sky [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/08/31 12:30:00 3F957D45 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75152
2015/08/31 12:30:00 3F957D45 r (reader) Sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/08/31 12:30:00 43855083 r (reader) hd [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/08/31 12:30:00 43855083 r (reader) hd [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/31 12:30:00 43855083 r (reader) hd [mouse] Setting baudrate to 115312 bps
2015/08/31 12:30:00 43855083 r (reader) hd [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2015/08/31 12:30:00 43855083 r (reader) hd [mouse] Buffers readed 0 bytes total time_us 75155
2015/08/31 12:30:00 43855083 r (reader) hd [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/08/31 12:30:00 43855083 r (reader) hd [mouse] Card responded ok for ifsd request of 160
2015/08/31 12:30:01 43855083 r (reader) hd [mouse] detect native nagra card
2015/08/31 12:30:01 3F957D45 r (reader) Sky [mouse] Card type: P1TV
2015/08/31 12:30:01 3F957D45 r (reader) Sky [mouse] Rom version: 10A7
2015/08/31 12:30:01 3F957D45 r (reader) Sky [mouse] Unable to get smartcard credit
2015/08/31 12:30:02 3F957D45 r (reader) Sky [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 14
2015/08/31 12:30:02 3F957D45 r (reader) Sky [mouse] found card system videoguard2
2015/08/31 12:30:02 3F957D45 r (reader) Sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/31 12:30:02 3F957D45 r (reader) Sky [videoguard2] card detected
2015/08/31 12:30:02 3F957D45 r (reader) Sky [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2015/08/31 12:30:02 3F957D45 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75160
2015/08/31 12:30:02 43855083 r (reader) hd [mouse] ready for requests
2015/08/31 12:30:02 43855083 r (reader) hd [mouse] found card system nagra
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] ROM: D N A S P 1 8 0
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] REV: M e r 0 0 0
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] SER: ############
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] CAID: 1843
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] Prv.ID: 00 00 00 00
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] IRD ID: ############
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] active to: 2015/10/21 12:59
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] -----------------------------------------
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] |id |tier |valid from |valid to |
2015/08/31 12:30:02 43855083 r (reader) hd [nagra] +----+--------+------------+------------+
2015/08/31 12:30:03 43855083 r (reader) hd [nagra] |8011|0066 |2012/10/04 |2013/10/05 |
2015/08/31 12:30:03 43855083 r (reader) hd [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/08/31 12:30:03 43855083 r (reader) hd [nagra] |8011|0BEA |2014/10/19 |2015/11/03 |
2015/08/31 12:30:03 43855083 r (reader) hd [nagra] -----------------------------------------
2015/08/31 12:30:03 3F957D45 r (reader) Sky [mouse] ATR: 3F FF 14 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 14
2015/08/31 12:30:03 3F957D45 r (reader) Sky [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
2015/08/31 12:30:03 3F957D45 r (reader) Sky [mouse] Setting baudrate to 76800 bps
2015/08/31 12:30:03 3F957D45 r (reader) Sky [mouse] Calculated work ETU is 13.03 us reader mhz = 357
2015/08/31 12:30:03 3F957D45 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75152
2015/08/31 12:30:03 3F957D45 r (reader) Sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] Card type: P1TV
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] Rom version: 10A7
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] Unable to get smartcard credit
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] FuseByte: 25
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] Region Code: 00BO0102
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] Country Code: DEU
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] Pincode read: 1112
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] PCB settings: FF FF FF FF
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] ready for requests
2015/08/31 12:30:04 3F957D45 r (reader) Sky [mouse] found card system videoguard2
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] card detected
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] ------------------------------------------------------------------
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] +---------+----------+---------------------+---------------------+
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0058 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 005a --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0056 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0057 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0068 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0069 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 006a --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 006b --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 006c --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0065 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 006d --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0066 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 006e --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0067 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 006f --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 007b --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 007d --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 0081 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 008e --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c0 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c8 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c9 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00ca --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00cb --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c7 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00fa --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00f3 --| 2015/10/29-00:00:00 |
2015/08/31 12:30:04 3F957D45 r (reader) Sky [videoguard2] |-- 00 ---|-- 00ff --| 2015/10/29-00:00:00 |
2015/08/31 12:30:05 3F957D45 r (reader) Sky [videoguard2] ------------------------------------------------------from-ins70--
2015/08/31 12:30:05 00000000 s (main) init for all local cards done
2015/08/31 12:30:05 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/08/31 12:30:05 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/08/31 12:30:05 00000000 s (anticasc) anti cascading disabled

 

[pehedima]

AW: keine user können mehr connecten

Karte wird schon mal gelesen.

Ein Client-Zugriff ist nicht zu sehen.

Evtl. ist es besser auf cccam (das hatte ja @4gx35 vorgeschlagen) oder cs378x zu wechseln.

Die providerid der V13/HD02 im NEWCAMD-Protokoll dürfte schon mal falsch sein.


Sollte so aussehen:

[newcamd]
port                          = [EMAIL="1001@09C4:000000;1002@1843:003411"]1001@09C4:[COLOR=#ff0000]000000[/COLOR];1002@1843:[COLOR=#FF0000]003411[/COLOR][/EMAIL]

Ports sollten auch immer 5-stellig sein, damit es zu keinen Kollisionen zu anderen fest definierten Ports kommen kann.

 

[tom_63]

AW: keine user können mehr connecten

Kannste mal die oscam.server deiner VU posten?

 

[mbnoob]

AW: keine user können mehr connecten

soooo...die ports waren das problem.
wie auch immer da ne 0 verschwinden konnte.

hd02 stellt sich noch quer. sollte ich was änder ?

(ecm) MB (1843@000010/0000/1519/89:48C52EE14FD249D25FB4A64E5FEDA4D8): rejected group (0 ms) - Tele5 HD (no matching reader)

Spoiler

[reader]
label = hd
protocol = mouse
device = /dev/hd
gbox_reshare = 0
autospeed = 0
cacheex_allow_request = 1
caid = 1843
boxkey = A76+++++++++++++++7C
rsakey = BF35++++++++++++++DD5
detect = cd
mhz = 600
cardmhz = 369
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
lb_weight = 300

am mouse reader die schalter

unten,unten,oben,oben

 

[pehedima]

AW: keine user können mehr connecten

Bitte immer ein vollständiges Logfile posten.
Ansonsten können wir doch nur raten.

 

[mbnoob]

AW: keine user können mehr connecten

logfile

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Mon Aug 31 13:35:02 2015
-------------------------------------------------------------------------------
2015/08/31 13:35:02 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10961 (i486-linux-gnu)
2015/08/31 13:35:02 00000000 s (main) System name = Linux
2015/08/31 13:35:02 00000000 s (main) Host name = debian
2015/08/31 13:35:02 00000000 s (main) Release = 3.2.0-4-486
2015/08/31 13:35:02 00000000 s (main) Version = #1 Debian 3.2.41-2+deb7u2
2015/08/31 13:35:02 00000000 s (main) Machine = i586
2015/08/31 13:35:02 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2475
2015/08/31 13:35:02 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/08/31 13:35:02 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/08/31 13:35:02 00000000 s (main) signal handling initialized
2015/08/31 13:35:02 00000000 s (config) 173 service-id's loaded in 4 ms
2015/08/31 13:35:02 00000000 s (net) newcamd: initialized (fd=6, port=10001)
2015/08/31 13:35:02 00000000 s (net) -> CAID: 09C4 PROVID: 000010
2015/08/31 13:35:02 00000000 s (net) newcamd: initialized (fd=7, port=10002)
2015/08/31 13:35:02 00000000 s (net) -> CAID: 1843 PROVID: 003511
2015/08/31 13:35:02 00000000 s (reader) Sky [mouse] creating thread for device /dev/sky
2015/08/31 13:35:02 00000000 s (reader) hd [mouse] creating thread for device /dev/hd
2015/08/31 13:35:02 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/08/31 13:35:02 00000000 s (main) waiting for local card init
2015/08/31 13:35:02 7FD03D14 h (webif) webif: decompressed 163552 bytes back into 390900 bytes
2015/08/31 13:35:02 7FD03D14 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/08/31 13:35:02 3FEEE8F1 r (reader) hd [mouse] Buffers readed 0 bytes total time_us 75173
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75340
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 1 value 03 time_us 2026
2015/08/31 13:35:02 3FEEE8F1 r (reader) hd [mouse] Flush readed byte Nr 1 value 03 time_us 4019
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 2 value 00 time_us 67877
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 3 value 77 time_us 1929
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 4 value 5b time_us 943
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 5 value 3f time_us 1924
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 6 value f7 time_us 946
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 7 value fe time_us 1944
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 8 value 7d time_us 921
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 9 value f2 time_us 1929
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 10 value 1f time_us 1944
2015/08/31 13:35:02 3FEEE8F1 r (reader) hd [mouse] Buffers readed 1 bytes total time_us 79236
2015/08/31 13:35:02 3FEEE8F1 r (reader) hd [mouse] Reader initialized (device=/dev/hd, detect=cd, mhz=600, cardmhz=369)
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 11 value 69 time_us 1383
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 12 value 00 time_us 1481
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 13 value ad time_us 938
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 14 value f5 time_us 1929
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 15 value f1 time_us 947
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 16 value ff time_us 1852
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 17 value ff time_us 857
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 18 value f5 time_us 1851
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 19 value 73 time_us 1871
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 20 value 7f time_us 874
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 21 value ff time_us 1853
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Flush readed byte Nr 22 value 77 time_us 873
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Buffers readed 22 bytes total time_us 176256
2015/08/31 13:35:02 25BD3BE1 r (reader) Sky [mouse] Reader initialized (device=/dev/sky, detect=cd, mhz=357, cardmhz=357)
2015/08/31 13:35:03 3FEEE8F1 r (reader) hd [mouse] card detected
2015/08/31 13:35:03 25BD3BE1 r (reader) Sky [mouse] card detected
2015/08/31 13:35:03 25BD3BE1 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75145
2015/08/31 13:35:03 3FEEE8F1 r (reader) hd [mouse] Buffers readed 0 bytes total time_us 75151
2015/08/31 13:35:04 25BD3BE1 r (reader) Sky [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/08/31 13:35:04 25BD3BE1 r (reader) Sky [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/08/31 13:35:04 25BD3BE1 r (reader) Sky [mouse] Setting baudrate to 9600 bps
2015/08/31 13:35:04 25BD3BE1 r (reader) Sky [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/08/31 13:35:04 25BD3BE1 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75157
2015/08/31 13:35:04 25BD3BE1 r (reader) Sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/08/31 13:35:04 3FEEE8F1 r (reader) hd [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/08/31 13:35:04 3FEEE8F1 r (reader) hd [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/08/31 13:35:04 3FEEE8F1 r (reader) hd [mouse] Setting baudrate to 115312 bps
2015/08/31 13:35:04 3FEEE8F1 r (reader) hd [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2015/08/31 13:35:04 3FEEE8F1 r (reader) hd [mouse] Buffers readed 0 bytes total time_us 75163
2015/08/31 13:35:04 3FEEE8F1 r (reader) hd [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/08/31 13:35:04 3FEEE8F1 r (reader) hd [mouse] Card responded ok for ifsd request of 160
2015/08/31 13:35:05 3FEEE8F1 r (reader) hd [mouse] detect native nagra card
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [mouse] Card type: P1TV
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [mouse] Rom version: 10A7
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [mouse] Unable to get smartcard credit
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 14
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [mouse] found card system videoguard2
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [videoguard2] card detected
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2015/08/31 13:35:06 25BD3BE1 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75155
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [mouse] ready for requests
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [mouse] found card system nagra
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] ROM: D N A S P 1 8 0
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] REV: M e r 0 0 0
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] SER: ############
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] CAID: 1843
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] Prv.ID: 00 00 00 00
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] IRD ID: ############
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] active to: 2015/10/21 12:59
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] -----------------------------------------
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] |id |tier |valid from |valid to |
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] +----+--------+------------+------------+
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] |8011|0066 |2012/10/04 |2013/10/05 |
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] |8011|0BEA |2014/10/19 |2015/11/03 |
2015/08/31 13:35:07 3FEEE8F1 r (reader) hd [nagra] -----------------------------------------
2015/08/31 13:35:07 25BD3BE1 r (reader) Sky [mouse] ATR: 3F FF 14 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 14
2015/08/31 13:35:07 25BD3BE1 r (reader) Sky [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
2015/08/31 13:35:07 25BD3BE1 r (reader) Sky [mouse] Setting baudrate to 76800 bps
2015/08/31 13:35:07 25BD3BE1 r (reader) Sky [mouse] Calculated work ETU is 13.03 us reader mhz = 357
2015/08/31 13:35:07 25BD3BE1 r (reader) Sky [mouse] Buffers readed 0 bytes total time_us 75154
2015/08/31 13:35:07 25BD3BE1 r (reader) Sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/08/31 13:35:08 25BD3BE1 r (reader) Sky [mouse] Card type: P1TV
2015/08/31 13:35:08 25BD3BE1 r (reader) Sky [mouse] Rom version: 10A7
2015/08/31 13:35:08 25BD3BE1 r (reader) Sky [mouse] Unable to get smartcard credit
2015/08/31 13:35:08 25BD3BE1 r (reader) Sky [mouse] FuseByte: 25
2015/08/31 13:35:08 25BD3BE1 r (reader) Sky [mouse] Region Code: 00BO0102
2015/08/31 13:35:08 25BD3BE1 r (reader) Sky [mouse] Country Code: DEU
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [mouse] Pincode read: 1112
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [mouse] PCB settings: FF FF FF FF
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [mouse] ready for requests
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [mouse] found card system videoguard2
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] card detected
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] ------------------------------------------------------------------
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] +---------+----------+---------------------+---------------------+
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0058 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 005a --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0056 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0057 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0068 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0069 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 006a --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 006b --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 006c --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0065 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 006d --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0066 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 006e --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0067 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 006f --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 007b --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 007d --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 0081 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 008e --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c0 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c8 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c9 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00ca --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00cb --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00c7 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00fa --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00f3 --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] |-- 00 ---|-- 00ff --| 2015/10/29-00:00:00 |
2015/08/31 13:35:09 25BD3BE1 r (reader) Sky [videoguard2] ------------------------------------------------------from-ins70--
2015/08/31 13:35:10 00000000 s (main) init for all local cards done
2015/08/31 13:35:10 00000000 s (anticasc) anti cascading disabled
2015/08/31 13:35:10 61A8282F c (newcamd) client connected to 10001 port
2015/08/31 13:35:10 58147EE7 c (-) -- Skipped 1 duplicated log lines --
2015/08/31 13:35:10 58147EE7 c (newcamd) client connected to 10002 port
2015/08/31 13:35:10 7C72639E c (newcamd) client connected to 10001 port
2015/08/31 13:35:10 7E837E9B c (newcamd) client connected to 10002 port
2015/08/31 13:35:10 00099B7B c (newcamd) client connected to 10001 port
2015/08/31 13:35:10 7E837E9B c (client) encrypted newcamd:10002-client 192.168.178.86 granted (MB, au=on (1 reader))
2015/08/31 13:35:10 7E837E9B c (newcamd) user MB authenticated successfully (mgcamd)
2015/08/31 13:35:10 7E837E9B c (newcamd) AU disabled for user MB
2015/08/31 13:35:10 7C72639E c (client) encrypted newcamd:10001-client 192.168.178.86 granted (MB, au=on (1 reader))
2015/08/31 13:35:10 7C72639E c (newcamd) user MB authenticated successfully (mgcamd)
2015/08/31 13:35:10 7C72639E c (newcamd) AU disabled for user MB
2015/08/31 13:35:10 7C72639E c (newcamd) SID list will not be send to mgcamd client.
2015/08/31 13:35:10 61A8282F c (-) -- Skipped 1 duplicated log lines --
2015/08/31 13:35:10 61A8282F c (client) encrypted newcamd:10001-client xxx granted (KlausH, au=off)
2015/08/31 13:35:10 61A8282F c (newcamd) user KlausH authenticated successfully (mgcamd)
2015/08/31 13:35:10 61A8282F c (newcamd) AU disabled for user KlausH
2015/08/31 13:35:10 00099B7B c (client) encrypted newcamd-client xxx rejected (newcamd:10001 disabled account)
2015/08/31 13:35:10 00099B7B c (newcamd) account is invalid for user RPoppel (mgcamd)
2015/08/31 13:35:10 58147EE7 c (client) encrypted newcamd-client xxx rejected (newcamd:10002 disabled account)
2015/08/31 13:35:10 61A8282F c (newcamd) SID list will not be send to mgcamd client.
2015/08/31 13:35:10 7C72639E c (ecm) MB (1843@000010/0000/1519/89:92CF0A1460F9E2E8FA5F64D5B1458EE5): rejected group (0 ms) - Tele5 HD (no matching reader)
2015/08/31 13:35:10 7E837E9B c (ecm) MB (1843@003511/0000/1519/89:92CF0A1460F9E2E8FA5F64D5B1458EE5): rejected group (0 ms) - Tele5 HD (no matching reader)
2015/08/31 13:35:10 25BD3BE1 r (reader) Sky [videoguard2] classD3 ins54: no cw --> Tier expired
2015/08/31 13:35:10 7C72639E c (ecm) MB (09C4@000010/0DAD/1519/B3:0535896B99AA54E2A894783EC3136063:000020): not found (184 ms) by Sky - Tele5 HD
2015/08/31 13:35:10 7E837E9B c (ecm) MB (09C4@003511/0DAD/1519/B3:0535896B99AA54E2A894783EC3136063:000020): not found (0 ms) by Sky - Tele5 HD
2015/08/31 13:35:12 61A8282F c (ecm) KlausH (09C4@000010/0131/0008/B3:C1DA3371DDAA81FB05122440760FB459): found (151 ms) by Sky - Sky Comedy
2015/08/31 13:35:13 7C72639E c (ecm) MB (1843@000010/0000/1519/89:92CF0A1460F9E2E8FA5F64D5B1458EE5): rejected group (0 ms) - Tele5 HD (no matching reader)
2015/08/31 13:35:13 7E837E9B c (ecm) MB (1843@003511/0000/1519/89:92CF0A1460F9E2E8FA5F64D5B1458EE5): rejected group (0 ms) - Tele5 HD (no matching reader)
2015/08/31 13:35:13 7C72639E c (ecm) MB (09C4@000010/0DAD/1519/B3:0535896B99AA54E2A894783EC3136063): not found (0 ms) by Sky - Tele5 HD
2015/08/31 13:35:13 7E837E9B c (ecm) MB (09C4@003511/0DAD/1519/B3:0535896B99AA54E2A894783EC3136063): not found (1 ms) by Sky - Tele5 HD
2015/08/31 13:35:14 61A8282F c (ecm) KlausH (09C4@000010/0131/0008/B3:56837F78A7056BE31C227B75AA6EE7F1): found (150 ms) by Sky - Sky Comedy
2015/08/31 13:35:15 7C72639E c (ecm) MB (1843@000010/0000/1519/89:AB9AE295D95E7FC69A322DB43275E2BF): rejected group (0 ms) - Tele5 HD (no matching reader)
2015/08/31 13:35:15 7E837E9B c (ecm) MB (1843@003511/0000/1519/89:AB9AE295D95E7FC69A322DB43275E2BF): rejected group (0 ms) - Tele5 HD (no matching reader)

 

[janni1]

AW: keine user können mehr connecten

Hi,
du hast wahrscheinlich immer noch die falschen Idents bei Newcamd in deiner Conf.
Zeig bitte noch einmal deine oscam.conf

Gruss
janni1

 

[mbnoob]

AW: keine user können mehr connecten

Spoiler

[global]
logfile = /var/log/ipc/OScam1.log
disableuserfile = 0
maxlogsize = 256
usrfile = userlog

[cache]

[newcamd]
port = 10001@09C4:000010;10002@1843:003511
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

hab die idents im hd reader raus gelöscht...nu gehts.
nur noch die hd reader einstellung und für beide au, dann bin ich glücklich.

 

[janni1]

AW: keine user können mehr connecten

Hi,
die ProvIds sollten so aussehen.

port = 10001@09C4:000000;10002@1843:000000,003411

nur noch die hd reader einstellung und für beide au, dann bin ich glücklich.

Was ist jetzt nochmal genau das Problem?
Poste am besten noch einmal die kompletten Configs.
Wer soll eigentlich AU machen?
Was läuft auf diesen Receivern für ein Emu?

Gruß
janni1

 

[mbnoob]

AW: keine user können mehr connecten

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10961
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/ipc/OScam1.log
disableuserfile = 0
maxlogsize = 256
usrfile = userlog

[cache]

[newcamd]
port = 10001@09C4:000000;10002@1843:000000,003411
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

Spoiler

Unix starttime: 1441020902
Starttime: 31.08.2015 13:35:02
Version: oscam-1.20-unstable_svn-r10961
Compiler: i486-linux-gnu
Box type: generic (generic)
TempDir: /tmp/.oscam
ConfigDir: /var/etc/
WebifPort: 83

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

Spoiler

[account]
user = MB
pwd = ****
caid = 09C4,1843
umaxidle = 0
au = Sky
emmreassembly = 0
group = 1,2

Spoiler

[reader]
label = Sky
protocol = mouse
device = /dev/sky
caid = 09C4
boxid = 12345678
ins7e11 = 14
detect = cd
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = hd
protocol = mouse
device = /dev/hd
gbox_reshare = 0
autospeed = 0
caid = 1843
boxkey = A7**********7C
rsakey = BF35***********DD5
detect = cd
mhz = 600
cardmhz = 369
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 300

receiver läuft mgcamd 1.35
den sky reader hatten wir ja schon ordentlich eingerichtet.
bei der hd02 weiß ich halt nicht was da am besten eingestellt und geblockt werden muß.
der mouse reader der hd02 steht auf unten, unten, oben, oben.
user mb soll beide karten updaten (wenn das geht)